What’s actually slowing this PC down?

Pick the symptom - the matching free tool is one click away.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more

The Jonsbo D200 is a Mini-ITX/Micro-ATX case with a curved tempered-glass showcase panel and a small digital temperature display. Its published limits are generous for a compact build—up to a 410 mm graphics card, 171 mm CPU air cooler, 170 mm ATX (PS2) power supply and a top-mounted 240 mm radiator—but those are manufacturer clearances, not a guarantee that every combination of parts will fit. Check the exact dimensions, cable exits, radiator thickness and mounting hardware for your planned build.

Jonsbo D200 specifications at a glance

Specification Jonsbo-published detail
Supported motherboards Mini-ITX and Micro-ATX
Exterior dimensions (with feet) 437 × 216 × 419 mm (depth × width × height)
Materials SPCC steel, tempered glass and ABS
Net weight 6.11 kg
Expansion slots Five
Maximum graphics-card length 410 mm
Maximum CPU air-cooler height 171 mm
Maximum ATX (PS2) PSU length 170 mm
Radiator support Top-mounted radiator up to 240 mm
Front I/O Two USB 3.0 Gen 1 Type-A, one USB 3.0 Gen 2 Type-C and one headset jack
Drive mounts Up to two 2.5-inch drives and one 3.5-inch position, with shared mounting constraints
Fan positions Top: three 120 mm or two 140 mm; rear: one 120 mm; power compartment: three 120 mm

These figures come from Jonsbo’s product specifications and D200 user guide, accessed in 2026. They have not been independently fit-tested.

What size motherboard does the Jonsbo D200 support?

The D200 accepts Mini-ITX and Micro-ATX motherboards. It is therefore aimed at compact mainstream systems rather than full ATX boards. The five expansion slots provide room for a substantial graphics card or other add-in cards, but slot position, card thickness and power-cable clearance still need checking against the specific motherboard and GPU.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Will a 410 mm graphics card fit in the Jonsbo D200?

Jonsbo lists 410 mm as the maximum graphics-card length. Treat that as a stated limit under the manufacturer’s configuration, not as a universal promise. Measure the card’s complete length, including any front bracket or protruding cooler shroud, and check whether a front radiator, fans, drive hardware or power cables occupy the same space. A card that is nominally 410 mm or shorter can still conflict with those parts.

Popular on Amazon
JONSBO D200 Black Micto ATX PC Case,Digital Screen, One-Piece Curved Glass Desktop Design 270° Ultra-Wide View,ATX Power supply/Dual240 AIO,GPU<410mm,7 Fan Positions, Black
  • JONSBO D200 Black Micto ATX PC Case
  • 【Curved One-piece Glass】270° Ultra-wide View The curved tempered glass design without pillars provides a better and wider hardware display angle ​
  • 【​Digital display temperature indication 】Monitor heat dissipation performance ​
  • ​The power supply compartment has a brushed metal texture surface that is smooth and silky
  • 【Convenient Disassembly Design】,Easier to build your PC,More convenient../​Standard with a Adjustable GPU Bracket ​

Cooling layout and radiator support

Top radiator

The user guide specifies support for a top radiator up to 240 mm, suitable for a 240 mm all-in-one liquid cooler. Confirm the radiator’s actual thickness, fan thickness and motherboard-RAM clearance; the published radiator size does not establish clearance for every AIO model.

Fan mounting positions

The listed positions are three 120 mm or two 140 mm fans at the top, one 120 mm fan at the rear and three 120 mm fans in the power-supply compartment. Jonsbo marks these fan positions as optional. The available material does not conclusively inventory which fans, if any, are included in the retail package, so verify the box contents with the seller or regional listing before budgeting.

Also popular on Amazon
JONSBO D33 Black Micro ATX PC Case,High Airflow MATX case with Tempered Glass Panel,9 Fan Positions,High Compatibility,Supports MATX BTF MB, 435mm GPU/360AIO/172mm Air Cooler,ATX/SFX PSU,Black
  • JONSBO D33 Black Micro ATX Desktop Case- An E-sports Tech-Style MATX Chassis : Magnetic suction grille front panel with an elegant U-shaped bent arc,rounded corners paired with a tech-inspired front end
  • 【High-efficiency heat dissipation】:Air duct case with 9 fan positions,Supports 360AIO on the top.Fan : Top 120mm*3(optional) Front 120mm*2(with ATX PSU)/ 140mm*2(with SFX PSU)(optional) Rear 120mm*1(optional) Bottom120mm*3(optional)
  • 【High quality craftsmanship shell】:Front I/O Panel- Aluminum Alloy Anodized Brushed Finish
  • High compatibility: MATX BTF motherboard support, ample space for high compatibility
  • Supports high-end GPU(Length:435mm) - gaming and work performance which is even more outstanding

What the specifications do not prove

No independent thermal, acoustic or airflow test was supplied. The mount count alone cannot establish operating temperatures, noise levels or the best fan direction for a particular build.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

What does the D200’s temperature display show?

Jonsbo presents the display as a temperature-monitoring feature. The D200 guide identifies CPU-temperature monitoring and says the System Temperature Monitoring software must be downloaded and installed for normal operation. The cited material does not establish sensor accuracy, update frequency, supported operating systems or whether the software remains compatible with every current platform. Consider the display a convenience indicator rather than a validated measurement instrument.

Also popular on Amazon
JONSBO D32 PRO Micro-ATX PC Case,High Compatibility Mini Desktop Case,A/B Mode for MB, Support MATX Back-Connect/BTF MB,365mm GPU/240AIO/163mm Air Cooler,ATX/SFX PSU, USB3.2 PC Gaming case,Black
  • JONSBO D32 PRO Micro ATX PC Case -【Unmatched Price per Performance】 - 24L Volume offer A/B mode for MB( Standard MB and BTF MB), Achieve different compatibility optimization solutions,Easier to build your PC,More convenient.
  • 【High Compatibility】- Micro ATX case upgrade to support the main popular hardware , such as BTF motherboard, Max.Length 365mm GPU,ATX/SFX-LSFX PSU (16A plug except), 240AIO,163mm Height Air Cooler etc.
  • 【Optimize visual design】: Tempered side glass shows the Concise and neat working hardware.(Adjustable motherboard cable management cover to block visible complex wires) ​
  • 【Optimized installation experience design】: detachable PCI-E position unobstructed opening design, easy insertion of large graphics card
  • 【Size】:D396×W207×H314mm (Foot included):

Can the Jonsbo D200 fit a 240 mm AIO?

Yes, the manufacturer lists a top-mounted radiator up to 240 mm. Before purchase, compare the chosen AIO’s radiator and fan stack with the motherboard’s top-edge components and memory modules, then check tubing routing and screw-hole alignment. Also review whether the AIO changes the available graphics-card or power-cable space in your exact layout.

Storage and front connectivity

The guide lists up to two 2.5-inch drives and one 3.5-inch position, but mounting capacity is shared. Jonsbo specifies one rear 2.5-inch mount and one position in the power-supply compartment that can accept either a 3.5-inch hard drive or a 2.5-inch SSD. Plan around those shared locations rather than assuming two 2.5-inch drives plus a separate 3.5-inch drive can always be installed together.

Also popular on Amazon
JONSBO/JONSPLUS Z20 Pink/White Micro-ATX Mini Tower Pc Case,with Detachable Carrying Handle, Mini Size, High-Performance Hardware Compatible, Support 240AIO, H160mm Cooler
  • JONSBO/JONSPLUS Z20 Mini Micro-ATX PC with Detachable Carrying handle-Built with only about 20L of volume, be easily placed in various desktop environments.Easier to build your PC,More convenient
  • Thick to 2mm integrated bent steel panels (panel + top panel)Complemented by a large area of delicate square openings, ​Combines heat dissipation and craftsmanship,Comprehensive Coverage Magnetic Dust Filter
  • Innovative Design: Removable PCI-E Fixing Piece to Optimize the Installation Experience for Longer GPU
  • [FAN]TOP 120mm*2/140mm*2 Bottom 120mm*2/140mm*2 Real 120mm*1 /92mm*1
  • [GPU Clearance]:Up to 363mm,depends on other hardware configurations ​ 【ATX PSU】 ATX/SFX/SFX-L The power supply can be adjusted in multiple gears. It is recommended to check the picture for detailed introduction to prevent interference from different hardware. It supports SFX side mounting.

External connectivity consists of two USB 3.0 Gen 1 Type-A ports, one USB 3.0 Gen 2 Type-C port and one headset audio jack. The specifications do not state charging wattage or display-output capability for the USB-C port.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Support on Ko-Fi

Power-supply and build-clearance checks

The stated ATX (PS2) PSU limit is 170 mm in length. Measure the PSU body and account for the modular-connector area, cable bend radius and any drive hardware in the power compartment. Likewise, keep the 171 mm CPU-cooler limit as a starting point: backplates, side-panel curvature, fan clips and motherboard socket placement can affect the real installation.

  1. Record the exact GPU length and thickness, CPU-cooler height or AIO radiator/fan thickness, PSU length and drive dimensions.
  2. Compare each measurement with the D200’s published maxima and mounting locations.
  3. Check interactions: GPU versus front hardware, top radiator versus RAM and motherboard heatsinks, and PSU cables versus drives or bottom fans.
  4. Confirm connector orientation and cable-routing space, especially for a long GPU and modular PSU.
  5. Verify the retailer’s accessory list, software availability and regional return policy before ordering.

Availability and buying context

AKIBA PC Hotline! reported the D200 arriving in Japan in two colors in February 2026. That report does not establish current stock, price, warranty terms or availability in other countries. Jonsbo’s product page shows a System Temperature Monitoring setup entry dated 2025-05-27 and a D200 manual entry dated 2025-08-15; check the manufacturer or local seller for the latest downloads and regional support.

Who should choose the D200?

The D200 makes sense if you want a Micro-ATX or Mini-ITX build with a visible curved-glass presentation, a front CPU-temperature readout and room for long graphics cards or a 240 mm top radiator. It is a less certain choice if you need confirmed bundled fans, extensive drive capacity, validated acoustic performance or guaranteed software support across a particular operating system. In every case, select parts by their complete measured dimensions and by how they interact, not by one maximum number in isolation.

Quick Recap

Bestseller No. 1
JONSBO D200 Black Micto ATX PC Case,Digital Screen, One-Piece Curved Glass Desktop Design 270° Ultra-Wide View,ATX Power supply/Dual240 AIO,GPU<410mm,7 Fan Positions, Black
JONSBO D200 Black Micto ATX PC Case,Digital Screen, One-Piece Curved Glass Desktop Design 270° Ultra-Wide View,ATX Power supply/Dual240 AIO,GPU<410mm,7 Fan Positions, Black
JONSBO D200 Black Micto ATX PC Case; 【​Digital display temperature indication 】Monitor heat dissipation performance ​
$99.99
Bestseller No. 2
JONSBO D33 Black Micro ATX PC Case,High Airflow MATX case with Tempered Glass Panel,9 Fan Positions,High Compatibility,Supports MATX BTF MB, 435mm GPU/360AIO/172mm Air Cooler,ATX/SFX PSU,Black
JONSBO D33 Black Micro ATX PC Case,High Airflow MATX case with Tempered Glass Panel,9 Fan Positions,High Compatibility,Supports MATX BTF MB, 435mm GPU/360AIO/172mm Air Cooler,ATX/SFX PSU,Black
High compatibility: MATX BTF motherboard support, ample space for high compatibility; Hardware compatibility- Motherboard Support:Mini-ITX / Micro-ATX/MATX BTF
$108.99
Bestseller No. 3
Bestseller No. 4
JONSBO/JONSPLUS Z20 Pink/White Micro-ATX Mini Tower Pc Case,with Detachable Carrying Handle, Mini Size, High-Performance Hardware Compatible, Support 240AIO, H160mm Cooler
JONSBO/JONSPLUS Z20 Pink/White Micro-ATX Mini Tower Pc Case,with Detachable Carrying Handle, Mini Size, High-Performance Hardware Compatible, Support 240AIO, H160mm Cooler
[FAN]TOP 120mm*2/140mm*2 Bottom 120mm*2/140mm*2 Real 120mm*1 /92mm*1; ​[HDD] : 2*2.5 SSD+1*3.5HDD or 3*2.5 SSD
$104.90

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.

Free tools Windows power users keep installed

One-click scans. No signup required.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.