The Anycubic Photon D2 is a compact DLP resin printer aimed at small, detailed models—not a machine for printing large parts in one piece. Anycubic lists a 1.58 L build volume, 165 × 131 × 73 mm print dimensions, and a 2560 × 1440 projector. It uses four-point manual leveling and USB input rather than Anycubic Cloud. Those are manufacturer specifications, not independent proof of print quality or reliability.
What the Photon D2 is—and what its specifications tell you
The Photon D2 uses digital light processing (DLP) to expose resin. Anycubic lists these specifications on its product page; the page’s publication date is not stated, and the values were accessed in 2026.
| Specification | Anycubic-listed value |
|---|---|
| Printing technology | DLP resin printing |
| Print volume | 1.58 L |
| Print dimensions | 165 × 131 × 73 mm (HWD) |
| Projector resolution | 2560 × 1440 |
| Exposure time | ≥2.5 seconds per layer |
| Leveling | Four-point manual leveling |
| Rated power | 15 W |
| Data input | USB Type-A 2.0 |
| Cloud service | Unsupported for Photon D2 |
| Machine dimensions | 430 × 236 × 226 mm (HWD) |
| Machine weight | 4 kg |
Check the stated print dimensions against the model you want to make, particularly its height: a model that exceeds the build envelope cannot be printed as one piece. The projector’s pixel count is a specification, not a direct measure of the finished part’s detail. The available material does not establish independent Photon D2 output tests with a transparent method, so advertised precision claims should not be treated as verified results.
Is the Photon D2 worth it for your prints?
A reasonable fit for small models
The compact build envelope makes the D2 relevant if your typical work consists of small models and you value a DLP resin workflow. Consider the model’s dimensions, including supports and orientation, before choosing it; the 1.58 L volume does not mean every object of that volume will fit in a practical orientation.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
#1 Best Overall
- Compatible Model: The integrated FEP release film replacement is designed for Anycubic Photon Mono 2K, Mono 4K, Photon Ultra, Photon D2 resin 3D printer, but it is not compatible with Mono 2 and Mono 4.
- Easy to Install: The One-Piece FEP release film is integrated design. The resin tank FEP film equips with a ring, which keeps it quicker and easier to replace the FEP film without cutting and also no need to disassemble the ring. Please read the manual on the package before install.
- High Transmittance: The transmittance of FEP film is more than 95%, which makes ultraviolet lighting more stable . You don't worry about the FEP film affecting the printing effect.
- High Temperature Resistant: The FEP film is high heat resistance and it can be able to work stably long term at 204 ° C. The FEP film is durable and service life is longer.
- Product Size and Package Included: 2PCS integrated FEP Release Film. The size of FEP film is 173x115.4x0.15mm.
Look elsewhere if you need larger single-piece prints
Its maximum listed dimensions are 165 × 131 × 73 mm. If your usual parts exceed those limits, you would need to split them into sections or choose a printer with a larger build area. There is not enough independently documented comparative testing here to call the D2 a performance leader or rank it against alternatives.
Resin choice and starting settings
A special DLP Craftsman resin is not established as mandatory. Anycubic publishes Photon D2 settings for multiple resin types, so use the profile for the specific resin you select rather than assuming all 405 nm photopolymer resins behave alike. Follow the resin’s manual and safety data sheet (SDS), and calibrate for your printer and conditions.
Rank #2
- Low Shrinkage & High Precision: ANYCUBIC UV resin prints the models with low shrinkage during the photocuring process, which ensures the high precision and smooth surface.
- Quick Curing & Strong Stability: ANYCUBIC photopolymer resin was specially developed to reduce the forming time with its extraordinary fluidity, and 3d model shows good stability in moist and corrosive environment after cured.
- Rigidity & Toughness: ANYCUBIC LCD resin has a good combination of hardness and toughness, which brings easy removal of the model and delivers accurate printing details.
- Multiple Colors & Universal Compatibility: ANYCUBIC standard resins are compatible with all DLP/LCD 3D printers, works best with ANYCUBIC LCD 3D printers, multiple colors for your choice. Take a full shake before use in order to have a fully mix the functional components and fully mix the color paste in the resin. Otherwise, uneven coloring of the print may occur.
- Safe & Secure Package: ANYCUBIC UV-Curing resin bottle is packed well in plastics bubble wrap, the cap is completely intact, surrounded by a tight-fitting air bag. No worries for leakage.
For DLP Craftsman resin, Anycubic Europe’s settings table lists the following Photon D2 starting parameters. The table’s publication date is not stated; the values were accessed in 2026.
| Parameter | Listed setting |
|---|---|
| Layer thickness | 0.05 mm |
| Exposure time | 2.5 seconds |
| Light-off time | 1 second |
| Bottom exposure | 28 seconds |
| Bottom layers | 5 |
These are settings for the named resin, not a guaranteed optimal recipe for every resin, machine, or environment. Other motion and anti-aliasing parameters are also included in Anycubic’s resin table.
Rank #3
- 【Sturdy Structure, No Wobble】 Anycubic Photon P1 employs stable ball screws and precision guide rails, combined with a precision-engineered print platform, to create a stable printing structure. This effectively minimizes motion vibration, enabling smoother lifting and lowering, ensuring flawless detail accuracy
- 【Easy Release, Higher Success Rate】The Wave Release Technology generates micro-airflow during plate lifting, reducing release force by 60%. 3D Models detach more easily, lowering failure rates and ensuring reliable long-term printing
- 【Ready to Print, Auto-Leveled】Smart Leveling 3.0 of Photon P1comes factory-calibrated, performs automatic self-check before each print, and provides real-time pressure feedback across four corners for fine-tuning. No need more manual bed leveling and just focus on creating
- 【AI Monitoring for Worry-Free Printing】The AI-powered inspection system performs dual verification of build plate installation and bottom layer separation. Integrated with resin level monitoring and residue detection in the vat, it identifies potential issues early, ensuring reliable printing every time
- 【Print Industrial Resins Instantly】Anycubic Photon P1 can handle ultra-high viscosity resins with a viscosity up to 8,000 cps, which is 40 times that of standard resins, meeting the demands of advanced creator. Pre-configured settings for Anycubic resins allow you to start printing right out of the box with no manual calibration
Workflow, setup, and support
USB rather than cloud printing
Anycubic lists USB Type-A 2.0 as the D2’s data input and says Anycubic Cloud is unsupported for this model. Plan on a USB-based file workflow; do not assume the printer can receive jobs through Anycubic Cloud.
Manual leveling
The D2 uses four-point manual leveling. This means leveling is a hands-on setup task, rather than a process the listed specification describes as automatic.
Rank #4
- 【Massive 18.3L Build Volume for High-Volume Batch Production】 With an impressive build volume of 285.5 ×214 ×300mm, this large-format resin printer accommodates oversized prototypes or densely packed batch runs in a single cycle.
- 【14-Inch 12K Monochrome Screen Delivers Ultra-Fine Detail】Equipped with a high-resolution 14-inch 12K screen (11520 × 8640 px) and 24.8×24.8μm square pixels, the printer eliminates jagged edges and aliasing for silky-smooth surfaces.
- 【1900ml Intelligent Heating Resin Tank】The thermal-controlled vat maintains an ideal temperature (up to 35°C), ensuring optimal resin flow even for high-viscosity materials. This feature minimizes print failures caused by temperature fluctuations, delivering stable quality in cooler workshop environments and expanding material compatibility.
- 【Auto-Leveling 3.0 Simplifies Setup and Calibration】The intelligent leveling system automatically checks and adjusts the build plate before each print, featuring factory calibration, self-check, and real-time force feedback for fine-tuning. This reduces setup time and eliminates guesswork, so you can start printing with confidence right out of the box.
- 【C7-Grade Ball Screw】The Anycubic Photon P1 Max utilizes C7-grade ball screws and linear guide rails, achieving a remarkable repeat positioning accuracy of ±0.01mm. This robust motion control system provides a rock-solid foundation, ensuring stable operation and print precision.
Official documentation and repair tutorials
Anycubic’s Photon D2 resource page provides an English manual, Photon Workshop downloads, tutorials, and videos covering repairs such as motherboard, lead-screw motor, and optical-engine driver-board replacement. This documentation is useful for setup and repair reference, but it does not establish support response quality or long-term availability of parts.
Before buying a replacement vat, check the Photon D2 parts and accessories listing against your printer revision and confirm that the item is currently available.
Windows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallOutdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchQuick Recap
Best Value
- 【7'' 10K HD Mono LCD】Anycubic Photon Mono 4 is equipped with a 7'' 10k mono LCD screen with a resolution of 9024x5120, XY axes pixel of 17x17um, 105% increase in print precision compared to its predecessor. This enhanced capability allows for creating models with exceptional detail and dynamic richness
- 【LighTurbo Matrix Light Source】Photon Mono 4 resin printer adopts Anycubic LighTurbo matrix light source, delivering stable, balanced, and uniform lighting to eliminate layer lines and rasterization, creating models with ultra-smooth surface and maximum print details. Single-layer exposure times cut down to just 1.5s to enhance print efficiency
- 【Large Printing Volume】With a Large enough print volume of 153.4 mm x 87 mm x 165 mm / 6.04'' x 3.42'' x 6.49'', Photon Mono 4 resin 3d printer provides you with ample print space to easily tackle your daily tasks and demanding projects, greatly improving print productivity and efficiency
- 【Upgraded Cleaning and Curing Volume】 Anycubic Wash& Cure 3 has an impressive 42% increase than the wash & cure 2.0 in cleaning basket capacity, now at 3 liters. The total volume of the cleaning bucket has been expanded to 4 liters. This makes it perfectly tailored for resin 3D printers with a size of 7.3 inches or less.
- 【Optimized Details Curing】 Flexicure Gooseneck design increases the energy value by 30,000uW/cm² in the 1-3 cm irradiation range and improves the curing effect on top of the model and other small parts.
What to check before buying
- Fit: Compare your intended model and orientation with the listed 165 × 131 × 73 mm print dimensions.
- Resin: Confirm that the resin has a suitable Photon D2 profile, and consult its manual and SDS for use and safety information.
- Workflow: Be prepared to use USB input and perform four-point manual leveling.
- Ownership terms: Check the seller’s return conditions and the warranty terms that apply in your region. Anycubic’s policy page does not establish a current Photon D2 warranty duration for every region and component.
- Price and stock: Verify current local availability and price; these are not established by the listed specifications.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
