The Zotac GeForce RTX 5060 Twin Edge Plus (SKU ZT-B50600E2-10M) is a two-slot graphics card measuring 220.5 × 120.25 × 41.6 mm. Zotac specifies one 8-pin PCIe power input, 145 W power consumption and a 550 W recommended PSU. Check your case clearance and power supply before buying; neither specification means every PC needs a new case or PSU.
Identify the exact Twin Edge Plus model
This article covers the ZOTAC GAMING GeForce RTX 5060 Twin Edge Plus, manufacturer SKU ZT-B50600E2-10M. The similarly named Twin Edge and Twin Edge OC are separate models, so confirm the full name and SKU on a product listing. Zotac’s official product page and 2026 brochure are the sources for the specifications below.
| # | Preview | Product | Price | |
|---|---|---|---|---|
| 1 |
|
ZOTAC Gaming GeForce RTX 5060 Ti 16GB Twin Edge OC White Edition DLSS 4 16GB GDDR7 128-bit 28 Gbps... | $979.99 | Buy on Amazon |
Will it fit in your PC case?
The card measures 220.5 × 120.25 × 41.6 mm (8.7 × 4.7 × 1.6 inches) and occupies two slots, according to Zotac’s 2026 brochure. Check the space available in your specific case against all three dimensions, not just the advertised GPU length. Also check for drive cages, radiator or fan assemblies, cables, and other components that could obstruct the card or its fans.
- Length: Allow at least 220.5 mm of unobstructed clearance from the expansion-slot area.
- Height and width: Check clearance around the card’s 120.25 mm height and 41.6 mm thickness, including room for the power cable and airflow.
- Slots: Reserve two expansion slots and ensure neighboring components do not block the card.
Zotac describes the Twin Edge Plus as having an SFF-Ready footprint, but small-form-factor cases vary. Confirm the case manufacturer’s usable GPU clearance and the actual internal layout rather than treating that label as a fit guarantee.
#1 Best Overall
- Powered by the NVIDIA Blackwell architecture and DLSS 4
- SFF-ready copmpact card, 2-slot, 16GB GDDR7, 128-bit, 28 Gbps, PCIE 5.0
- IceStorm 2.0 Cooling, 2x 90mm BladeLink fans, Composite Heatpipes, Pass-thru Airflow Design, FREEZE Fan Stop
- Metal Backplate, 8-pin PCIe power connector
- 3 x DisplayPort 2.1b, 1 x HDMI 2.1b, 8K Ready, 4 Display Ready, HDCP 2.3, VR Ready
What power supply and connector does it need?
Zotac specifies a single 8-pin PCIe power input, 145 W power consumption and a 550 W recommended power supply. Check that your PSU has sufficient rated capacity for the full system and a compatible PCIe 8-pin lead available to connect to the card. Do not assume that the 145 W figure is the entire PC’s power requirement; the PSU recommendation applies to the system configuration Zotac intends it to support.
If your existing PSU meets the recommendation and has the required lead, the published specifications do not imply that you need to replace it. If it does not, assess the whole system and PSU before purchase rather than relying on the card’s power figure alone.
What are the card’s core specifications?
| Specification | Zotac RTX 5060 Twin Edge Plus |
|---|---|
| GPU | NVIDIA GeForce RTX 5060 |
| CUDA cores | 3,840 (Zotac, 2026 brochure) |
| Memory | 8 GB GDDR7 |
| Memory bus | 128-bit |
| Memory clock | 28 Gbps |
| Engine clock | 2,497 MHz |
| Interface | PCI Express 5.0 x8 |
| Power | 145 W listed consumption; 550 W recommended PSU |
| Dimensions and slot use | 220.5 × 120.25 × 41.6 mm; two slots |
These are manufacturer specifications, not independent performance measurements. Zotac also advertises 614 AI TOPS and DLSS 4.5; those are the manufacturer’s listed capability and feature claims, not evidence of a particular game frame rate.
How many monitors can you connect?
The card has three DisplayPort 2.1b outputs and one HDMI output, and Zotac lists support for up to four displays. Its published maximum modes require Display Stream Compression (DSC): up to 4K at 480 Hz or 8K at 165 Hz over DisplayPort, and up to 4K at 480 Hz HDR or 8K at 120 Hz HDR over HDMI. These are interface capability limits, not a promise that games will render at those resolutions and refresh rates. Actual display modes also depend on the monitor, cable, settings and workload.
Recommended Free Tools
Operating-system and other listed support
Zotac lists Windows 11 and Windows 10 64-bit version 1809 (November 2018) or later. The specifications also list DirectX 12 Ultimate, OpenGL 4.6 and Vulkan RT APIs/Vulkan 1.4 support. The user manual is the only included accessory established in the official materials cited here.
What does “Plus” mean, and what is not established?
Zotac describes the Twin Edge Plus as having enhanced cooling compared with the Twin Edge, along with a metal backplate, Freeze Fan Stop and BladeLink fans. These are manufacturer descriptions; they do not establish independently measured temperatures, noise levels or a performance advantage over another card. The reviewed official materials also do not establish gaming benchmark results, current price or availability.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
