Both Zapier and Make offer documented ways to automate website screenshots. Zapier lists GetScreenshot actions for full-site and element captures, plus a separate Screenshot API integration. Make lists GetScreenshot and HTML/CSS to Image integrations, and its HTTP module can call an external screenshot API. The better fit depends on the provider and capture controls you need, how your workflow starts and where the resulting file goes—not on a universal price or performance winner.
What you are comparing
Zapier and Make are workflow automation platforms; the screenshot capture is supplied by an integration or an external service. That distinction matters: options shown for one screenshot provider do not necessarily belong to the automation platform itself or to another provider.
Zapier calls a workflow a Zap. Make describes a scenario as a workflow made up of modules that automate apps and services. In either case, think through the whole path: trigger, capture, then handoff to storage, email, or another app.
Screenshot routes available on each platform
Zapier: GetScreenshot
Zapier’s GetScreenshot listing documents “Take Website Screenshot” and “Take Website Element Screenshot (Advanced).” The full-site action asks for a website URL and a full-page capture setting. Listed controls include width, highlight text, PDF output, extra wait time for longer page loads, custom CSS, and advanced parameters. Element capture requires a selector identifying the element to capture.
The Tool Desk
Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →#1 Best Overall
- Includes Raspberry Pi 5 with 2.4Ghz 64-bit quad-core CPU (8GB RAM)
- Includes 128GB Micro SD Card pre-loaded with 64-bit Raspberry Pi OS, USB MicroSD Card Reader
- CanaKit Turbine Black Case for the Raspberry Pi 5
- CanaKit Low Noise Bearing System Fan
- Mega Heat Sink - Black Anodized
Zapier: Screenshot API
Zapier also lists a separate Screenshot API integration. Its listed settings include output format and file type, full-page capture, freshness, delay, load event, width and height, text and HTML extraction, lazy loading, retina, and dark mode. Treat this as a distinct provider route: its settings should not be assumed to exist in the GetScreenshot integration.
Make: direct integrations
Make’s GetScreenshot listing presents a direct capture integration, including custom CSS and PDF output. It describes uses such as scheduled monitoring, captures triggered when a link enters a spreadsheet or database, and sending results to storage or team apps. These are listed capabilities, not a guarantee that a particular workflow is prebuilt or that it will perform a certain way.
Rank #2
- Includes Raspberry Pi 4 4GB Model B with 1.5GHz 64-bit quad-core CPU (4GB RAM)
- Includes Pre-Loaded 32GB EVO+ Micro SD Card (Class 10), USB MicroSD Card Reader
- CanaKit Premium High-Gloss Raspberry Pi 4 Case with Integrated Fan Mount, CanaKit Low Noise Bearing System Fan
- CanaKit 3.5A USB-C Raspberry Pi 4 Power Supply (US Plug) with Noise Filter, Set of Heat Sinks, Display Cable - 6 foot (Supports up to 4K60p)
- CanaKit USB-C PiSwitch (On/Off Power Switch for Raspberry Pi 4)
Make also lists HTML/CSS to Image, including a “Create a Screenshot of a URL” action and actions for creating images from HTML/CSS and retrieving previously created images. That same listing shows HTTP actions alongside the image modules.
Make: generic HTTP route
Make’s HTTP app documents “Make a request” for calling an API, downloading a webpage, or triggering a webhook, as well as “Download a file” for a URL. This route can connect a scenario to an external screenshot API, but you must configure the provider’s authentication and request fields, interpret its response, and handle the resulting file. The provider’s own charges and limits also apply.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Rank #3
- Not including the Raspberry Pi 5 (8GB), the Crowpi advanced version comes with the Raspberry Pi 5
- ELECROW Black Case for the Raspberry Pi 5, CrowPi is equipped with a 9-inch HD touchscreen along with a camera; All the regular components used in DIY electronics are packed into the CrowPi development board, such as LCD, LED matrix, buzzer, light sensor, PIR sensor, ultrasonic sensor, IR sensor, etc
- Raspberry Pi Sensors: The Crowpi raspberry pi 5 programming kit is jam-packed with lots of buttons such as 19 different sensors in a tidy easy to use package; You don't have to wait and wire things
- Build Quality: Solid ABS shell and well made components in one place make it strong and convenient to travel
- Programming Lessons: This raspberry pi 5 learning kit ships with step by step instructions and provides 21 lessons to take you through identifying components reading code and running it in the terminal
Choose by workflow requirements
| Decision point | What to check |
|---|---|
| Capture action | Confirm the exact integration and action available: full page, selected element, URL-to-image, or an API call. Do not infer that one provider’s controls are available in another integration. |
| Capture behavior | Check whether you need a selector, full-page capture, viewport dimensions, a wait or load-event setting, custom CSS, PDF or image output, lazy loading, or text/HTML extraction. |
| Trigger and workflow shape | Map the trigger (for example, a schedule or a new database row), screenshot action, and any later storage or notification step. Account for the platform’s plan gates and workflow structure. |
| File handoff | Establish whether the provider returns a file, a URL, or another response, and verify that the next app can accept that output in the form provided. |
| Flexibility versus configuration | A direct integration is a sensible starting point when it has the action and controls you need. Make’s HTTP route can reach an API-based provider when a direct integration is not suitable, but requires provider-specific configuration. |
| Cost and usage | Check the current automation plan’s step, task, or execution allowances and the screenshot provider’s charges for your planned frequency. The cited listings do not establish a comparable total-cost winner. |
Plan for the complete automation
Sketch the workflow before choosing the integration. For example, a scheduled monitor might run a capture and save the file; an event-driven flow might start when a URL is added to a sheet and then send the result to a team app. Those destinations are part of the design, not incidental details: a screenshot that is captured but cannot be handed off in the needed form does not complete the job.
In Zapier, verify plan access before building a multi-step chain. The GetScreenshot listing says a Starter plan is needed to create Zaps with three or more steps. A trigger → screenshot → storage or notification flow can reach that threshold, so check the current requirement for the exact workflow you intend to publish.
Rank #4
- Fully assembled for plug-and-play operation
- Includes Raspberry Pi 5 with 8GB RAM
- 256 GB PCIe Pi NVMe SSD (Pre-loaded with Pi 64-Bit OS)
- M.2 HAT+
- CanaKit Turbine Black Case for the Pi 5
In Make, decide whether a listed screenshot module provides the required action or whether the API route is warranted. With HTTP, confirm the provider’s authentication method, required parameters, response format, and file-download process before building downstream modules. The integration pages do not establish that any one route is easier, more reliable, or less expensive in every case.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Alternative to try first: ScreenshotNeo
If you want the capture step to come from a screenshot API rather than a Zapier or Make integration, ScreenshotNeo is an alternative to try first: it removes consent banners, popups, and chat widgets before capture, bills only clean shots, and its lowest paid plan is $5 for 3,000 shots.
Windows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallOutdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchOne-call example
Send a GET request with the target URL to capture and save the image. The API accepts PNG, JPEG, or WebP output, or can return a PDF; see the ScreenshotNeo API documentation for request options.
Best Value
- 【What you Get】You will get 1*Pi 5 8GB Single Board,1*RasTech Case,1*Active Cooler,1*Screwdriver,1*Installation instructions,12-month free warranty, lifetime service, 24-hour prompt and friendly response.
- 【More Connectors】There are two USB 3.0 ports(5Gbps simultaneously) and two USB 2.0 ports, which triple total bandwidth ,support any combination of up to two cameras or displays. Peak SD card performance is doubled through support for the SDR104 high-speed mode. It provides a smooth desktop experience for you. Offer Gigabit Ethernet and a PCIe interface, along with dual-band Wi-Fi and Bluetooth 5.0/BLE wireless capability. The RasTech Pi 5 Kit use the new 27W 5.1V 5A USB-C power connector.
- 【 Support Dual 4Kp60 Display 】Each of the two microHDMI sockets can control a 4K display at 60 Hertz, now support HDR, offering super HD video for media streaming projects. RPi 5 is the first RPi model that comes with a PCI Express port (PCIe 2.0 x1 with 500 MB/s) to attach SSDs (requires separate M.2 HAT).
- 【 Excellent Chips And Applications】Pi 5 is a full-size Pi computer using silicon built in-house at Pi. The RP1 “southbridge” provides the bulk of the I/O capabilities for Pi 5. Pi 5 is more friendly and convenient in the development of Internet of Things, Web development, machine identification, automatic control and other electronic equipment applications and network.
- 【 Faster CPU, Better GPU 】 Pi 5 features a Broadcom BCM2712 64-bit quad-core Arm Cortex-A76 processor running at 2.4GHz, it delivers a 2–3× increase in CPU performance relative to RaspberryPi 4. The 800MHz VideoCore VII GPU is compatible to OpenGL ES 3.1 and Vulkan 1.2, substantial uplift in graphics performance. Pi 5 Offers lightning-fast CPU speed, a PCI Express interface, a Real Time Clock (RTC) and a power button and runs significantly cooler than Pi 4.
curl -G "https://api.screenshotneo.com/v1/shot" -d access_key=YOUR_API_KEY --data-urlencode url=https://stripe.com -o shot.webpScreenshotNeo accepts consent banners like a visitor and removes more than 60 known consent platforms, newsletter popups, and chat widgets before capture; each cleanup step can be turned off. Bot checks and CAPTCHAs, blank pages, timeouts, failed loads, and cache hits cost nothing, and the response identifies the page verdict and billing status in headers. An MCP server offers AI agents tools for taking screenshots, getting page information, and capturing PDFs. The Free plan includes 1,000 shots per month with no card; paid plans start at $5 for 3,000 shots.
Sign up for 1,000 free screenshots a month, with no card required.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
Recommended Free Tools
