Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more

Tens of thousands of backers pledged more than $4 million to the open-source KVM-over-IP project JetKVM on Kickstarter: TechRadar reports that 31,598 backers pledged $4,370,767 against a $50,000 goal before the campaign ended on December 3, 2024. JetKVM provides hardware-level remote access to a computer’s display, keyboard, and mouse.

The campaign title’s “pen-source” wording is a typo; the project is described as open source. JetKVM is not simply a remote-desktop app: it captures HDMI video and emulates USB input, allowing access during BIOS or UEFI setup, operating-system installation, boot failure, and recovery.

Key takeaways

  • JetKVM’s Kickstarter campaign ended on December 3, 2024, with $4,370,767 pledged by 31,598 backers against a $50,000 goal.
  • JetKVM is a hardware KVM-over-IP device that sends a computer’s HDMI video and USB keyboard-and-mouse input over a network.
  • Because JetKVM works below the target operating system, it can provide access during BIOS or UEFI setup, operating-system installation, boot failure, and recovery.
  • The device requires compatible physical connections: HDMI video output, USB connectivity, Ethernet networking, and suitable power.
  • JetKVM’s software stack and related repositories are publicly available under GPL licensing, but the commercial physical appliance and every future hardware component should not automatically be treated as open hardware.

What happened to the open-source KVM-over-IP project on Kickstarter?

The open-source KVM-over-IP project on Kickstarter was JetKVM, a compact hardware appliance for remotely controlling a computer. According to TechRadar’s April 3, 2025 report, the campaign finished on December 3, 2024, after raising $4,370,767 from 31,598 backers—far above its $50,000 target.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Kickstarter measure JetKVM result
Campaign end date December 3, 2024
Funding goal $50,000
Total pledged $4,370,767
Backers 31,598
Funding compared with goal Approximately 87 times the original goal

Those numbers describe the crowdfunding campaign, not current sales, current inventory, or the number of devices installed worldwide. They also do not prove that every backer received a unit on the original schedule. A later JetKVM production update said rewards had begun shipping and that more than 1,600 backers had received shipments at the time of that update.

Popular on Amazon
GL.iNet Comet PoE Remote KVM GL-RM1PE with Tailscale 4K Streaming | PoE and Type-C dual power supply, 32GB built-in eMMC, remote BIOS reinstall, USB interface for ATX and Fingerbot, 4K at 30FPS
  • 【Power over Ethernet (PoE)】 Comet PoE (GL-RM1PE) enables easy device powering with PoE support. Users can simply connect it to a PoE switch to eliminate extra power adapters and reduce cable clutter
  • 【Built-in Tailscale】 Enables secure, efficient data transfer between devices using WireGuard's encrypted transmission and direct connection features. Ideal for home labs, offices, and multiple networking scenarios
  • 【Dual Power Option(POE & Type-C)】 It supports 5V power adapters, both PoE and the adapter can be used simultaneously for enhanced power stability
  • 【Built-in 32GB eMMC Storage】 Comet PoE (GL-RM1PE) comes with an onboard 32GB eMMC storage, to pre-store two or more system images. This enables smoother system reinstallation while offering enhanced scalability for future needs
  • 【4K@30Hz HD Video & Ultra-Low Latency】 Experience ultra-clear, low-latency 4K video streaming with efficient H.264 hardware encoding. Combined with built-in two-way audio, it enables seamless audio conferencing, real-time troubleshooting, and remote monitoring, making it ideal for professional communications and management

The campaign accelerated sharply near its conclusion. In a December 3, 2024 campaign update, JetKVM reported $1,845,519 pledged by 13,076 backers with approximately four hours remaining. The final campaign total reported later by TechRadar was substantially higher, so the two figures represent different points in the campaign rather than conflicting totals.

How does JetKVM work?

JetKVM captures the target computer’s display through HDMI and emulates keyboard and mouse input through USB. The device then makes the video and input controls available over a network connection, normally through a web browser.

That design differs from a conventional remote-desktop application. A software remote-desktop tool normally needs a functioning operating system, network stack, and remote-access service or agent on the target computer. JetKVM sits outside the target operating system: the target computer sees a display connection and USB input devices, while the remote operator sees the captured screen.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Capability Software remote desktop JetKVM-style hardware access
Requires the target operating system to run Usually yes No, for basic video and USB control
Can interact with BIOS or UEFI Usually no Yes, if the target outputs compatible video
Works during operating-system installation Only after suitable software access exists Yes, through the captured display and emulated USB input
Target-side drivers or agent Usually required JetKVM’s FAQ says no additional target-side drivers are required for compatible HDMI and USB interfaces
Physical compatibility requirement Primarily software and network compatibility Compatible video output, USB behavior, network, and power connections

JetKVM’s official FAQ describes the device as operating-system independent for systems that support the relevant HDMI and USB interfaces. The qualification matters: operating-system independence does not mean universal hardware compatibility.

What does the JetKVM setup require?

The documented JetKVM setup requires four principal connections: Mini HDMI from the target computer’s HDMI output to JetKVM’s HDMI input, USB-C from JetKVM to a USB port on the target computer, RJ45 Ethernet to the network, and power for the JetKVM device. After powering it on, the operator opens the IP address shown by the device in a browser.

  1. Connect JetKVM’s Mini HDMI input to the target computer’s HDMI output.
  2. Connect JetKVM’s USB-C port to a USB port on the target computer so JetKVM can emulate keyboard and mouse input.
  3. Connect the RJ45 Ethernet port to the local network.
  4. Provide power to JetKVM according to the setup documentation.
  5. Find the IP address displayed during startup and enter that address in a browser on the same network or through the configured remote-access method.

The JetKVM Quick Start documentation identifies USB-C, Mini HDMI, RJ45 Ethernet, and an RJ11 extension port as the principal connectors. A Mini HDMI plug is not the same size as a Micro HDMI plug, so buyers should check the connector before ordering a cable. A Mini HDMI-to-HDMI cable is the directly relevant accessory for the documented connection.

Also popular on Amazon
New Open-Source KVM Over IP, Remote Server Management Device with HDMI and USB Connectivity (Non-PoE)
  • Open-source software
  • Free & Optional Remote Access
  • Ultra-low Latency
  • microSD card included
  • Full-size HDMI

A USB-C cable and an Ethernet cable may also be needed, depending on the cables already available and the exact power arrangement. Generic cables are setup items rather than special JetKVM features; the important requirement is matching the documented connector and data function.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Why is hardware KVM-over-IP useful?

Hardware KVM-over-IP is useful when a computer must be controlled before its operating system is available or when the operating system has failed. JetKVM can therefore be relevant to homelabs, headless servers, workstations, remote offices, and recovery systems.

  • BIOS and UEFI configuration: change firmware settings without connecting a monitor and keyboard locally.
  • Operating-system installation: watch the installer and provide keyboard input while the target system is being set up.
  • Boot troubleshooting: inspect boot messages or interact with recovery tools when normal remote-desktop software cannot start.
  • Headless operation: manage a computer that normally runs without a permanent monitor, keyboard, or mouse.
  • Remote recovery: regain low-level access after a driver problem, failed update, or inaccessible operating system.

JetKVM does not eliminate every remote-management problem. The physical target still needs to produce a supported video signal and accept USB input. The network path must also be available, and a powered-off computer may need a separate way to start or reset it.

Can JetKVM work with VGA-only computers?

JetKVM is designed around HDMI capture, so a VGA-only computer needs an appropriate active VGA-to-HDMI conversion path. Compatibility with ordinary desktop video is not enough: BIOS screens, low resolutions, unusual refresh rates, and early boot output can behave differently from a normal operating-system display.

An active HDMI-to-VGA adapter is therefore a possible compatibility accessory only after checking the direction and signal requirements carefully. User reports describe mixed results with VGA conversion, but those reports are anecdotal rather than controlled testing; the reported adapter experiences should not be treated as a universal compatibility list.

What’s actually slowing this PC down?

Pick the symptom - the matching free tool is one click away.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Target video output Expected JetKVM approach Important caveat
HDMI Connect directly with a Mini HDMI-to-HDMI cable Confirm that the target’s HDMI output and resolution are supported
VGA only Use an active VGA-to-HDMI conversion solution Test BIOS, UEFI, low-resolution, and early-boot modes; results vary by adapter
No usable video output JetKVM cannot display the target screen USB and network connections cannot replace a missing compatible video signal

What is the RJ11 port used for?

JetKVM’s RJ11 extension port connects the device to optional expansion hardware. According to the official FAQ and documentation, the expansion ecosystem can support ATX power control, serial-console access, and AC/DC power-control functions.

Also popular on Amazon
AV Access 4K HDMI USB KVM Extender TCP/IP Over Single Cat5e/6/6a/7 to 390ft | 1080P@120Hz, Plug & Play, Keyboard & Mouse Over Network, Zero Latency, 3 Ports USB Hub, DIP up to 16 Sets
  • 【4K HDMI Extension up to 120m over Ethernet】Extend HDMI video, audio, and USB signals up to 120m(390ft) using a single Cat5e Ethernet cable, and upto 150m(492ft) using a single Cat6/6A/7 Cable. Supports 4K@30Hz and 1080P@120Hz with smooth performance and 7.1-channel audio—ideal for remote workstations, gaming setups, and AV installations without long HDMI cables.
  • 【KVM Extension Over Your Existing IP Network】 Leverage your current Ethernet infrastructure—no dedicated KVM cabling, no costly rewiring. Deploy remote keyboard, mouse, and peripheral control anywhere there's a network connection, reducing installation costs, shortening deployment time, and making post-installation upgrades simple and scalable. Perfect for server rooms, control centers, and distributed workstations.
  • 【Remote Control with USB Keyboard & Mouse】Built-in USB 2.0 KVM extender allows you to control a remote PC, server, or game console using a keyboard, mouse, or controller. The receiver includes 3 USB ports (480Mbps) for peripherals like flash drives, gamepads, or printers.
  • 【Flexible Setup for Multiple Systems】The 4-pin DIP switch design supports up to 16 extender sets operating within the same network. Easily pair each transmitter (TX) and receiver (RX) by matching switch positions, making it ideal for control rooms, offices, classrooms, and digital signage systems.
  • 【Stable Long-Distance Transmission】Designed for reliable signal delivery across long distances. When used through a Gigabit network switch, the system maintains the high bandwidth needed for stable video and USB transmission—perfect for centralized equipment rooms or rack installations.

Wake-on-LAN is one way to start a compatible computer, provided the computer supports Wake-on-LAN and the feature is enabled in firmware and configured correctly. Wake-on-LAN does not replace a physical power-control connection in every system.

For compatible ATX computers, a JetKVM ATX extension board can trigger the motherboard’s power-switch pins remotely. The manufacturer’s ATX extension-board documentation describes simultaneous connection of the original front-panel controls and the JetKVM control board, allowing local buttons and remote control to coexist. Wiring must match the target motherboard and the applicable hardware revision.

JetKVM also describes a DC extension board for computers with compatible DC-input power arrangements. The correct board depends on the target’s power architecture, so the extension port should not be interpreted as a universal method for switching any computer’s mains or power supply.

Free tools Windows power users keep installed

One-click scans. No signup required.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Is JetKVM really open source?

JetKVM’s software stack is publicly available under GPL licensing, but “open source” should not be read as meaning that every physical component, manufacturing process, cloud service, or future hardware revision is open in exactly the same way.

A JetKVM production update says the project released its core source code and published repositories for the KVM runtime, user interface, cloud API, website, and documentation. The project’s official GitHub repository identifies the KVM project as GPL-2.0 licensed and describes a Go backend, a React and TypeScript interface, WebRTC-based remote access, optional JetKVM Cloud access, and optional Tailscale networking.

The distinction is practical. Public software can be inspected, modified, self-hosted, or customized by people with the necessary technical skills. The physical JetKVM appliance remains a commercially manufactured product, and cloud access may involve project infrastructure even though the official site presents cloud access as optional rather than a mandatory subscription requirement.

Also popular on Amazon
JetKVM IP KVM,Jet KVM over IP, Ethernet IPKVM,Control any Computer Remotely | Low Latency 1080P@60FPS,Touchscreen,32GB TF,HDMI USB-C,ATX DC Power Control Extension,Open Source,Data Center Home Lab Office
  • Easy to Install JetKVM:Connect the Jet KVM to your device you wish to control via USB-C and HDMI, then attach your IP KVM to network by an ethernet cable.Enter the displayed IP address in any browser and you're ready for remote control.
  • KVM Over IP with 3 Access Options:Local Access way by typing KVM's IP address into any browser.Remote Cloud Access by logging into the cloud dashboard from anywhere. Wake on LAN option by Sending magic packet via MAC address to wake device remotely.
  • Ultra-low Latency IP KVM:1080*1920p@60FPS video with 30-60ms latency using H.264 encoding. Smooth mouse and keyboard interaction for responsive remote control.Jet KVM provides a video quality toggle with three options(High,Medium,Low),allowing you to adjust the video stream's bitrate based on your connection speed and resolution needs.
  • KVM-Over-IP with Flexible Power Options:Here are the four power supply methods for JetKVM.Power JetKVM via USB-C from the controlled device.You can supply the ip KVM from a separate 5V power supply or from DC Extension/ATX Board Extension.
  • Open-Source KVM over Ethernet: The JetKVM is built for Collaboration on a robust Golang foundation and powered by Linux. Whether you're a seasoned developer or an enthusiastic tinkerer,you can easily modify or fine-tune the software using familiar tooling and straightforward SSH uploads.

What are the JetKVM performance claims?

JetKVM’s public product material claims 1080p video at 60 frames per second, H.264 encoding, and latency in the 30–60 millisecond range. Those are manufacturer-published specifications, not independently measured benchmarks, so actual results can vary with the target output, network path, browser, encoding conditions, and remote-access configuration.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

The official JetKVM site presents the device as a remote-control appliance with optional cloud access and customization possibilities. The product’s suitability depends more on the reader’s need for low-level access and recovery than on headline streaming specifications alone.

Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Support on Ko-Fi

What should you buy for a JetKVM setup?

The central purchase is the JetKVM KVM-over-IP device, but the required accessories depend on the target computer. Readers should verify current availability, seller identity, pricing, model, and hardware revision before ordering because the Kickstarter campaign is historical and current reseller inventory can change.

Item When it is needed What to verify
JetKVM KVM-over-IP device Every JetKVM installation Current model, hardware revision, included cables, availability, and supported access method
Mini HDMI-to-HDMI cable Target computer has HDMI video output and a cable is not included or available Mini HDMI at the JetKVM end; do not substitute Micro HDMI without checking
USB-C data/power cable The documented USB connection or power arrangement requires an additional cable USB data capability, connector type, length, and power requirements
Ethernet cable Wired network connection to the JetKVM Suitable length and a network port or switch connection
Active HDMI-to-VGA adapter Target computer is VGA-only Signal direction and tested BIOS/UEFI resolution compatibility
JetKVM ATX extension board Remote power-button or reset-style control is needed on a compatible ATX system Motherboard header wiring, supported hardware revision, and safe pass-through of front-panel controls
DC power-control extension Target is a compatible DC-input computer Voltage, connector, polarity, and manufacturer compatibility requirements

Do not confuse JetKVM with a generic HDMI switch, HDMI splitter, or software remote-desktop application. An HDMI switch changes which local source appears on a display; a splitter duplicates video; a remote-desktop application operates inside the target operating system. JetKVM’s defining feature is remote access to the target’s display and USB controls at a lower layer.

Should you buy JetKVM because the Kickstarter raised more than $4 million?

The campaign’s funding is evidence of strong interest, not proof that JetKVM is the right device for every buyer. JetKVM is most compelling when BIOS access, headless-server management, operating-system installation, or remote recovery matters and the target has compatible HDMI and USB connections.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

A buyer should be more cautious when the target is VGA-only, has unusual video modes, lacks a dependable network path, or requires power control that has not been checked against the relevant extension board. Buyers should also distinguish the original campaign result from current retail availability and from the shipping status of individual backers.

Also popular on Amazon
PiKVM V4 Mini IP KVM
  • The next generation of Raspberry Pi based KVM over IP. Manage your servers or PC remotely! PiKVM is a feature-rich, production grade, open-source, Raspberry Pi based KVM IP device.
  • Transfer your mouse and keyboard actions to a remote PC using this remote kvm over ip. Take full control of a remote PC’s power: Pi KVM provides remote reset or reboot using the actual hardware reset & power buttons connector functions.
  • Access to all configuration settings of a remote computer like tweaking UEFI/BIOS settings to do some overclocking! Boot a controlled PC using any OS you need using mass storage device emulation support. You can even reinstall the system remotely using this mini kvm!
  • PiKVM Fanless design with a passive heatsink for quiet ipkvm operation
  • Includes a locator led simplifying your device search.

For readers comparing the broader category, PiKVM, GL.iNet Comet, Sipeed NanoKVM, Pi-Cast KVM, and USBridge KVM 2.0 are related KVM-over-IP or remote-management projects. The supplied evidence does not establish that these products are equivalent to JetKVM, nor does it verify current affiliate availability, shipping status, or performance parity for each alternative.

What is the bottom line?

JetKVM is a small open-source-oriented hardware KVM-over-IP appliance whose Kickstarter campaign ended with $4,370,767 pledged by 31,598 backers. Its value comes from controlling a compatible computer before or outside the operating system, especially for BIOS access, headless systems, installation, and recovery. Its limits are equally concrete: HDMI, USB, Ethernet, power, and hardware-revision compatibility still matter.

Frequently Asked Questions

Does JetKVM work when the target operating system is unavailable?

Yes. JetKVM is designed to provide hardware-level access through captured HDMI video and emulated USB keyboard and mouse input, so basic access does not depend on the target operating system running. The target still needs compatible HDMI and USB connections, network access, and power.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Does open-source JetKVM mean the physical hardware is completely open source?

No. JetKVM’s software stack and related repositories are publicly available under GPL licensing, but the commercial appliance, physical components, manufacturing process, cloud dependencies, and future hardware revisions should not automatically be assumed to be open hardware.

Can JetKVM turn a computer on remotely?

JetKVM can use Wake-on-LAN when the target computer supports it and the feature is enabled correctly. Compatible systems can also use an ATX or DC extension board for additional remote power-control functions, but the board and wiring must match the target hardware.

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply. Prices as of November 16, 2026 3:56 am GMT.