The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Plastic Logic appointed Simon Jones as Vice President of Business Development and Bridget Kerle as Chief Financial Officer and General Counsel. The announcement describes Jones’s background in technology business development and Kerle’s prior finance leadership at Commtag.
Who joined Plastic Logic’s management team?
The indexed EE Times item, “Plastic Logic amends management team,” reports two appointments: Simon Jones as Vice President of Business Development and Bridget Kerle as Chief Financial Officer and General Counsel. The available indexed text does not reliably establish the announcement’s original publication date.
What experience did Simon Jones bring?
Jones had been General Manager of the Bluetooth Business Group at Tality. His earlier career included work at Cambridge design company Symbionics and subsequent roles after Symbionics was acquired by Cadence Design Systems. The announcement describes his experience as spanning design services and IP licensing.
Who was Bridget Kerle?
Kerle was most recently Chief Financial Officer at Commtag, which the indexed announcement describes as a wireless-data software company. At Plastic Logic, her appointment combined the CFO role with General Counsel responsibilities.
Recommended Free Tools
#1 Best Overall
- Provide online user manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), please check the manual carefully before using!
- This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
- Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
- No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
Why did these roles matter to Plastic Logic?
Plastic Logic was a Cambridge, England spin-out founded in 2000 to develop plastic-electronics technology and printed active electronic circuits for flexible, large-area applications, according to EDN’s company background. Against that backdrop, the appointments added business-development leadership alongside finance and legal oversight. The announcement does not provide a quoted explanation of the hires or a specific business target.
What is established about the announcement’s timing?
The accessible EE Times index identifies the headline and appointment details but does not reliably expose the item’s original publication date. A separate EE Times report says Indro Mukerjee became CEO in 2011, succeeding Richard Archuleta; that later leadership change does not establish when this two-person announcement appeared.
Quick Recap
Best Value
- This is 2.13inch E-Ink display HAT with Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi series boards, Jetson Nano. 250x122 resolution, Black and White Two Display colors, with embedded controller, communicating via SPI interface, supports partial refresh.
- No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
- SPI interface, for connecting with controller boards likeArduino/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs.
- Version Notice: The driver board is Rev2.1 (Version 2.1), which is independent of the screen version. Currently, there is only Rev2.1 (Version 2.1) for the driver board and QC label V4 is for the screen version, QC label V4 is currently being shipped.
- Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32): bit.ly/3hZh77i
Rank #4
- SPI interface, Compatible with Raspberry Pi/Arduino/Nucleo, etc.
- Ultra low power consumption, basically power is only required for refreshing
- Onboard voltage translator, compatible with 3.3V/5V MCUs
- Comes with development resources and manual (examples Compatible with Raspberry Pi/Arduino/STM32)
- No backlight, keeps displaying last content for a long time even when power down
Rank #3
- ✅ This is a e-Paper display, with driver board. Compatible with Raspberry Pi and Jetson Nano
- ✅ Adopts E_Ink Spectra 6(E6) technology, supports 6-Color display. No backlight, keeps displaying last content for a long time even when power down
- ✅Ultra low power consumption, basically power is only required for refreshing. Onboard voltage translator, compatible with 3.3V / 5V MCUs
- ✅With standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards/Jetson Nano.Adapting SPI interface for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
- ❤️Rich WiKi Resources❤️ We provide official Wiki resources, please contact us for more information.
Rank #2
- Enjoy a paper-like viewing experience with the 2.13-inch e-paper display. The screen can retain the last displayed image even after power is removed, making it ideal for applications requiring long-term information display without continuous power supply.
- Designed for low-power projects, this e-ink module only consumes energy during screen updates and remains in standby mode most of the time. Perfect for battery-powered devices, smart labels, IoT projects, and long-running applications.
- Featuring a 250x122 pixel black-and-white display, this e-paper HAT delivers clear text and image rendering. Partial refresh support helps reduce update time and power consumption for smoother display operation.
- Equipped with a standard Raspberry Pi 40-pin GPIO header and SPI communication interface, this display module works with Raspberry Pi series boards, Arduino, ESP32 and other compatible development platforms. Built-in voltage conversion supports both 3.3V and 5V MCUs.
- Comes with connection accessories and supports online resources including driver board diagrams and example programs for Raspberry Pi, Arduino, and ESP32, helping developers quickly start their projects.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.
