Quick wins for a faster PC:
Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Repair Windows errors before they cause bigger problemsFix Now →Scan for outdated or missing drivers - takes under a minuteDriver Scan →Yes—you can bring a Nabaztag back to life. One route is TagTagTag, a replacement electronics board that fits Nabaztag and Nabaztag:tag shells and works with a Raspberry Pi Zero W and microSD card. It restores the rabbit’s lights, sound and moving ears while adding sensors and modern computing. The original Violet service is closed, but community-run alternatives offer another way to restore core behaviors without replacing the hardware.
What TagTagTag changes inside the rabbit
Nabaztag was a Wi-Fi-connected rabbit created by Olivier Mével and Rafi Haladjian and launched by Violet in June 2005. Speech, sounds, lights and moving ears let it deliver ambient information and messages. Violet’s official service later closed, leaving owners to rely on community projects or retrofit hardware to keep the devices useful. Raspberry Pi’s project article describes TagTagTag as a replacement board for Nabaztag and Nabaztag:tag shells, paired with a Raspberry Pi Zero W. Multiplié reports that the project has tutorials, schematics and source code available.
The board’s documented components include five RGB LEDs, two MEMS microphones, an audio codec and amplifier, an LIS3DH accelerometer, and a Si7021-A20 temperature and humidity sensor. That combination is intended to bring back expressive output while making room for newer sensing and processing.
What you need
- A compatible original Nabaztag or Nabaztag:tag rabbit.
- A TagTagTag replacement board.
- A Raspberry Pi Zero W.
- A microSD card.
The retrofit involves opening the rabbit and installing replacement electronics. The Raspberry Pi article describes project capabilities including weather information, local speech recognition and “ear-based Tai Chi”; these are project descriptions, not independent performance test results.
The Tool Desk
Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →#1 Best Overall
- Compatibility: Pi 5 PCIe M.2 HAT only compatible with Raspberry Pi 5 2GB/4GB/8GB/16GB SBC (NOT include Raspberry Pi 5), NVMe base for Raspberry Pi 5, Model: X1001, the matching case is P579
- M2 Key-M NVMe SSD Supported: Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation; Comes with SSD copper pillar for 2230/2242/2260 SSD installation
- User Manual and FAQ: Google Geekworm WiKi and search X1001 and its FAQ; Refer to the FAQ to do troubleshoot step by step if can't boot/recognize from NVMe SSD
- Designed as a basic PCIe expansion board for the Raspberry Pi 5, the X1001 features limited standalone hardware functionality and requires proper OS configuration, stable FFC cable connection, and compatibility between firmware and SSDs for reliable operation.
- Power Supply Requirements: The X1001 is powered directly through the PCIe FFC ribbon cable. For stable operation, use the Raspberry Pi 5 PD 27W USB-C Power Supply (5.1V/5A). Note: Standard phone chargers may not provide sufficient power for NVMe SSDs, which can result in SSD instability, data corruption or drive failure.
What the crowdfunding history does—and does not—tell you
Multiplié reports 150,000 Nabaztag units sold worldwide and says TagTagTag received crowdfunding in 2019 and 2021. Adafruit’s 2021 account likewise describes a kit replacing the original electronics with a new board paired with a Raspberry Pi, and says hardware and software were open source and kits were available through Ulule. These records establish the project’s crowdfunding history, not present-day inventory or delivery availability. Adafruit’s 2021 summary is useful historical context; check the project’s own current channels before relying on a board being available to buy.
Can Nabaztag still work after Violet’s servers shut down?
Yes, but it depends on the route you choose. The original official service is no longer available; community alternatives provide replacement services. The nabaztag.org portal reports that its service supports speech, ear movement, five LEDs, RFID reactions, sleep and wake routines, radio playback and conversational interactions. Those are capabilities reported by that community project, not continuing Violet services. See the nabaztag.org community portal.
Rank #2
- Compatible models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (Note: NOT compatible with 500 / 400)
- GPIO status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
- Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
- Terminal block and header: Connect to all pins of the main board, 2.54 mm (0.1 inch) pitch
- Pin name: The BCM numbering name of each pin is printed next to it
TagTagTag retrofit or community service?
These approaches solve different problems. A retrofit changes the electronics and adds a Raspberry Pi; a community service aims to restore behaviors using the existing rabbit hardware. Choose based on whether you want a hardware project or primarily want the original interactions working again.
| What to compare | TagTagTag retrofit | Community alternative service |
|---|---|---|
| Hardware work | Open the rabbit and install the replacement board, Raspberry Pi Zero W and microSD card. Raspberry Pi | Designed to revive behaviors without the TagTagTag electronics replacement. nabaztag.org |
| What it adds or restores | Modern computing plus documented sensors and project-described features such as weather, local speech recognition and ear-based Tai Chi. Raspberry Pi | Community-reported speech, ears, LEDs, RFID, sleep/wake, radio and conversational behavior. nabaztag.org |
| Availability evidence | Crowdfunding campaigns in 2019 and 2021 are documented; current stock is not established. Multiplié | The portal describes an alternative service; hardware compatibility and current service details should be checked with the project. nabaztag.org |
How to choose a revival route
- Choose TagTagTag if you are comfortable opening the rabbit and want to replace its electronics with a Pi-powered board.
- Check the community service first if your priority is restoring speech, ears, lights or other supported behaviors without a hardware retrofit.
- Verify project status before spending: historical crowdfunding coverage does not confirm that boards are currently in stock, that campaigns are still delivering, or that a service supports every rabbit revision.
Violet’s archive captured the original ambition with the line, “Nabaztag is the first of a new species.” Violet archive. The revival projects extend that idea in different ways: one replaces the rabbit’s electronics, while community servers focus on restoring its connected behaviors.
Free tools Windows power users keep installed
One-click scans. No signup required.
Quick Recap
Best Value
- Hailo-10H AI accelerator delivering 40 TOPS (INT4) inferencing performance.
- Performance for computer vision models comparable to the Raspbery Pi AI HAT+ (26 TOPS).
- Runs generative AI models efficiently using 8GB on-board RAM.
- Fully integrated into Raspbery Pi’s camera software stack.
- Conforms to Raspbery Pi HAT+ specification.
Rank #4
- 3.5 inch, 320×480 resolution, TFT LCD resistive touch screen, clear display effect and using easily with a touch pen.
- No external power supply required.Just plug it into the Raspberry Pi board correctly and install the driver to use it. (Driver installation tutorial is provided)
- This 3.5 inch touch screen is specially designed for Raspberry Pi, perfectly suitable for Pi5, Pi4B, Pi3B+, Pi3B, Pi2B, Pi1B (directly-pluggable).
- Compatible with a variety of systems, such as for Raspbian system, ubuntu system, kali Linux system and so on.
- You can get one 3.5 inch raspberry pi touch screen and one touch pen, what the important things is that the project introduction, code and tutorial is provided.We provide technical support, If you encounter any difficulties during use, please contact us first to help you solve it.
Rank #3
- for Raspberry Pi: Uninterruptible Power Supply UPS HAT for Raspberry Pi 4B/3B+/3B, etc. Supports charging and power output at the same time, with dynamic path management, stable 5V output. Supports 21700 ba-tte--ry ( ba-tte--ry is NOT included). Onboard warning indicators, easy to check if the ba-tte--ry is connected correctly
- Uninterruptible Power: It is able to charge the ba-tte--ries and provide power output at the same time from external power supply. Automatically switch over to ba-tte--ries output if external power supply is unavailable, keeps the system running without any trouble
- Dynamic Path Management, More Stable Power Supply: Multi ba-tte--ry protection circuits: over charge/discharge protection, over current protection, short circuit protection, more safe and stable
- Powering the Raspberry Pi via Pogo Pins: Powering the Raspberry Pi via pogo pins, without using any GPIO resource, compatible with Raspberry Pi 4B / 3B+/3B, etc.
- Real time monitoring: Monitoring the ba-tte--ries voltage, current, power, and remaining capacity via I2C. When the voltage dips too low, it is possible to save files properly and then shut down the system by software, to avoid any data loss
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
