To switch videos without ending your YouTube live event, keep OBS sending one continuous encoder feed and change the active content inside OBS. Prepare a scene for each video, then switch scenes while the encoder remains connected. YouTube treats stopping the encoder’s content as ending the stream, so stopping and restarting OBS for every video is not the right routine for a continuous event.
What “without a gap” means
The goal is to keep the same YouTube live event and encoder connection active while the video shown in that feed changes. OBS scenes provide a way to change what the encoder sends: OBS documents scene transitions, quick transitions, and configured hotkeys. Combining those controls with YouTube’s encoder workflow supports this method, but it is not a special gapless-switch feature provided by YouTube.
A scene change can still include the transition you choose. If you need a hard cut rather than a visible fade or other transition, check the selected transition in OBS and inspect the outgoing feed before relying on it. The official guidance cited here does not establish exact transition settings for a particular OBS version.
Set up one continuous YouTube event
- Create or schedule the event. In YouTube Studio, create or schedule the live stream and retrieve its stream URL and stream key. YouTube’s encoder setup instructions describe entering these in the encoder’s server and stream-key fields.
- Configure OBS to send to that event. Enter the YouTube stream URL and key in the corresponding encoder fields. Treat the stream key as a credential: it authorizes an encoder to send the feed, so do not share it publicly.
- Prepare the content changes in OBS. Arrange the rerun videos so each intended video can be shown by switching to its scene, or otherwise arrange the content so you can make the required change with OBS’s scene controls. OBS’s overview guide explains scenes, transitions, quick transitions, and hotkeys.
- Start the encoder and verify the preview. Begin sending the feed and confirm that YouTube receives it in the live preview before proceeding with the event, following YouTube’s encoder workflow.
- Switch the content, not the connection. At each changeover, use the OBS scene transition or configured hotkey to show the next video. Leave the encoder output running and keep the same YouTube event active.
Choose a changeover method
| Method | What happens | When it fits |
|---|---|---|
| Switch OBS scenes while the encoder stays live | The active content changes within the feed; the YouTube encoder connection remains running. | The appropriate routine for changing videos while keeping one live event continuous. |
| Stop and restart the encoder for each video | You stop sending content, which YouTube identifies as the way to end a stream. | Not appropriate when the aim is one continuous live event. |
| Trigger a configured OBS hotkey | A keyboard shortcut can switch the active scene; OBS also documents quick transitions. | Useful when you want a direct manual trigger. A normal keyboard shortcut is sufficient; dedicated shortcut hardware is optional, not required by the cited OBS guidance. |
Check file playback and unattended changes in your OBS version
Scene switching and encoder continuity do not by themselves establish how a particular media source will restart, loop, or advance to the next file. The official sources cited here do not specify those media-source options or a guaranteed automatic playlist configuration. Before leaving a rerun unattended, verify the installed OBS version’s media-source behavior with the actual files and confirm that the next scene or item appears as intended.
PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware match#1 Best Overall
- NO PROGRAMMING REQUIRED FOR SIX TV BRANDS — Preprogrammed buttons instantly control Samsung, LG, Sony, Vizio, Fire TVs and Roku TVs (some Sharp and Insignia Roku TVs may require programming); requires two AAA batteries (not included)
- STREAMING APP HOTKEYS — Dedicated buttons provide direct access to Netflix, Prime Video, Disney+ and YouTube when installed by the TV manufacturer; support for user-installed apps may vary
- FULLY BACKLIT KEYPAD — Illuminated buttons improve visibility and navigation in dark rooms, bedrooms, media rooms and other low-light environments
- DESIGNED FOR SMART TVs — Convenient replacement remote for compatible Samsung, LG, Sony, Vizio, Fire TV and Roku TV models throughout your home
- EASY SETUP AND CONTROL — Simply insert two AAA batteries and select your TV brand; no programming required for supported TVs
- Test the end of one file and the start of the next while watching the OBS output.
- Confirm that the intended scene is active after the changeover and that the encoder is still sending.
- Use the YouTube preview to check what viewers will receive before relying on an unattended run.
Understand YouTube settings that affect viewers
YouTube defines stream latency as the delay between capture and playback. Its settings guidance notes that lower latency may increase buffering. This affects how quickly viewers see the feed; it does not control OBS scene changes.
YouTube’s DVR option lets viewers pause and rewind. It is a viewer playback feature, not a way to switch OBS content or remove a gap in the encoder feed. Also, YouTube says streams under 12 hours are automatically archived; that is an archive detail, not a switching method or a guarantee of gap-free playback.
Rank #2
- Replacement remote for five popular TV brands – Includes preprogrammed TV device buttons for Samsung, LG, Sony, Vizio and Roku TVs – simply press the TV device button that matches your TV’s brand; fully backlit; requires two AA batteries (not included)
- Preprogrammed streaming app hotkeys – Preprogrammed app hotkeys provide direct access to the most popular streaming apps: Netflix, Disney+, Prime Video, Hulu and YouTube
- Multi-device control – Operate Samsung, LG, Sony, Vizio and Roku TVS, as well as one other device, such as a Blu-ray/DVD player, cable/satellite receiver, streaming media player, soundbar, etc.
- Simple setup – AUX button is preprogrammed for Roku boxes but can be reprogrammed to operate another device using auto code search or direct code entry programming; master volume control lets you adjust the audio no matter which device is being used
- U.S.-based technical support – Patent-pending universal remote comes with free U.S.-based technical support available Monday-Friday, 7AM-8PM Central Time to assist with any questions or issues; online step-by-step programming videos are also available
Troubleshoot a changeover
- The live event ends at a video change: Check whether OBS stopped sending its output. Switch the active scene without stopping the encoder; YouTube’s encoder instructions say to end a stream by stopping content from the encoder.
- The new video does not appear: Check that the intended OBS scene is active and that the outgoing feed shows it. Recheck the scene arrangement and transition controls before the next changeover.
- A file finishes but playback does not continue as expected: Verify the media-source restart, loop, and next-item behavior in the OBS version installed. The cited official guides do not establish a universal checkbox or automation recipe for this.
- YouTube does not receive the encoder feed: Recheck the stream URL and stream key in the encoder fields against the event’s settings, then follow YouTube’s encoder preview workflow.
- Viewers report delay or buffering: Review YouTube’s latency setting with the trade-off in mind: lower latency can mean more buffering. This is separate from scene switching.
Or let it run in the cloud
If the rerun is uploaded video rather than a camera feed, StreamNeo is an alternative for keeping a YouTube channel live from the cloud. Upload the recording or build a playlist, add your YouTube stream key once, and go live. Nothing has to stay on at home; StreamNeo plays the uploaded video, not a live camera feed.
Every slot streams what you upload at any quality up to 4K 60fps for one flat price per slot, with no re-encode or quality tiers, and automatically recovers if YouTube drops the stream. The first day is free with no card. Monthly pricing is $9.99 per month.
Free tools Windows power users keep installed
One-click scans. No signup required.
Quick Recap
Best Value
- 15 Customizable LCD Keys: instantly control your apps, tools and platforms.
- One-Touch Operation: trigger single or multiple actions, launch social posts, adjust audio, mute mic, turn on lights, and much more.
- Visual Feedback: know that your command has been executed.
- Powerful Plugins: Elgato 4KCU, OBS, Twitch, YouTube, Twitter, Discord, Spotify, Philips Hue, and many more.
- Hotkey Actions: streamline your film editing, music production, photography workflow, etc.
Rank #4
- READY TO USE: No setup required — simply insert batteries and start controlling your TV right out of the box.
- DIRECT REPLACEMENT: Designed to work just like your original remote, serving as an ideal drop-in replacement for compatible TV models.
- STREAMING SHORTCUTS: Dedicated one-touch buttons for Netflix and YouTube provide instant access to your favorite streaming apps.
- CLEAR BUTTON LAYOUT: Features intuitive navigation controls, dedicated volume and channel buttons, a numeric keypad, and power and input keys for easy everyday use.
- FAST & RELIABLE: Delivers stable signal transmission and responsive control with a durable build designed for long-lasting everyday performance.
Rank #3
- 18 Programmable Keys Macro Keypad: This stream controller deck comes with 18 customizable macro keys (15 LCD visual keys + 3 physical buttons). Users may program single actions or multi-step sequences for daily operation. The keys support in-game combos, app launch and media playback control for multiple usage scenarios. Each LCD key accepts JPG, PNG and GIF images and animations to mark separate functions
- Single Tap Control: This USB macro keyboard pad supports single tap commands for quick operation. Users can trigger pre-set macros, input text, open files and web pages, adjust media playback, or switch OBS scenes with one tap. The straightforward layout fits gaming, live streaming and professional office task setup
- One Tap Multi-Shortcut: This macro controller pad streaming deck supports multi-shortcut macro programming for gamers and content creators. Custom shortcuts simplify game combo inputs, video editing, music production and photography workflows. The Operation Follow function runs multiple macro steps in custom order or simultaneous execution for adjustable task control
- Adjustable RGB Surround Light Ring - VSD M18 gaming streaming deck features an outer RGB light ring with auto color cycle mode. Custom RGB tones are available via device firmware upgrade. The light ring offers adjustable visual lighting for dim gaming, streaming and night work setups.
- Wide System Compatibility: This VSDinside macro control board works with Windows 11 and newer, macOS 11.0 and newer systems. Connect via USB-C cable for immediate use. It is compatible with mainstream software including OBS, Streamlabs, YouTube, Twitter, Discord, Excel, Word and Photoshop for daily production work. Native Linux system plug-and-play support is not available, while SDK development documents are provided for custom secondary development
Start your free StreamNeo day.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
