Set your Brother printer to use a low-power idle state, but keep its control panel visible and comfortable to reach. Start with Sleep or Deep Sleep, then consider Auto Power Off only if your exact model’s manual confirms it will still wake and remain available the way you need.
Start with Sleep or Deep Sleep
Sleep and Deep Sleep are the printer-side settings most directly intended to reduce energy use while the machine is idle. Brother says Deep Sleep uses less power than Sleep. On supported models, a print job wakes the printer; some model instructions also say a control-panel key can wake it. The exact wake behavior can depend on the printer and its network configuration, so check your model’s guide before changing settings if you rely on remote or network printing.
Brother’s Sleep Time guidance describes the setting as a way to reduce power consumption, while its Sleep Mode guidance explains the difference between Sleep and Deep Sleep. These are manufacturer statements, not a measured estimate of savings for your particular printer.
Adjust the idle timer using your model’s instructions
On supported printers, the Sleep Time setting controls how long the machine waits before entering Sleep. The menu path and available timer range vary by model, so use the guide or support page for the exact model number printed on your machine.
#1 Best Overall
- UL Listed: FOUCECLAUS Specifically Designed Power cord for Brother AC Power Adapter (Models AD24, AD24ES, AD24ESA, AD24A, AD-20, AD-30, AD-60).
- Power Specs : 8.2 feet long cord / Input Volt Range: 100-240V / Output: 9V 1.6A (Same output as the original charger).
- Multi-Protect safety system ensures complete protection for you and your devices.
- Compatible with Brother P-touch Label Maker Models PT-200G PT-D210 PT-N20 PT-N25BT PTD220 PTD210 PT-D210BK PT-H110 PTH110 PT-E100 PT-1000 PT-1010 PT-1010B PT-1010NB PT-1010R PT-1010S PT-1090 PT-1090BK PT-1200 PT-1230PC PT-1280 PT-1280SR PT-1280TG PT-128AF PT-1290 PT-1290RS PT-1290SBVP PT-1300 PT-1400 PT-1500PC PT-1600 PT-1650 PT-1700 PT-1750SC PT-1800 PT-1810 PT-1830 PT-1830C PT-1830SC PT-1830VP PT-1880 PT-1880C PT-1880SC PT-1880W PT-1890C PT-1890SC PT-1890W PT-1900 PT-2030 PT-2030AD PT-2030VP PT-2100 PT-2730.
- What You Get: 1pc FOUCECLAUS Replacement Power Adapter for brother PT-220 .
Brother’s model-specific menu example
For the monochrome laser fax/MFC models covered by one Brother support article, the path is General Setup > Ecology > Sleep Time. That article gives a maximum setting of 50 minutes for those models; it is not a universal limit for Brother printers. If your menus differ, do not assume the same path or range applies—look up your model in Brother support.
Use Auto Power Off only if it suits how you print
On models that offer it, Auto Power Off goes further than Deep Sleep by turning the machine off after a period of inactivity. This can affect readiness and remote access, so treat it as optional rather than a default recommendation. Check the exact manual for what can wake the printer and whether jobs sent over your network remain available.
Rank #2
- Replacement 125V 10A 3 Prong C13 Printer Power Cord for Brother MFC Series printer
- Three prong power cables to replace your overused, old, broken, damaged, or misplaced power cable or add extra distance / extension between devices for convenience.
- 3 Prong C13 Power Cords,125V 10A 18AWG(approx.0.824mm), NEMA 5-15P to IEC320 C13 Extension extension iec power cable connects from equipment socket to standard 3 pronged AC outlet receptacle.
- Printer power cord replacement for Brother MFC HL series printer.
- Package content: 1 x 2.5 meters ( 8 Feet ) length 3 Prong AC Power Cord Cable for Brother MFC HL Series printer
Exceptions are model-specific. Some Brother instructions say Auto Power Off will not activate while the machine is connected to a network or telephone line, or while secure print data is stored. A Brother page for one product family lists 1-, 2-, 4-, or 8-hour choices, but those intervals should not be assumed for other models. See Brother’s Auto Power Off instructions for the covered family and confirm the behavior in your own printer’s guide.
Choose print defaults for paper and toner savings
Print settings can reduce consumables, but paper or toner savings are not the same as a verified reduction in electricity use. Use these options when they fit the document:
Free tools Windows power users keep installed
One-click scans. No signup required.
- Duplex (two-sided) printing: Choose it for documents where printing on both sides is practical. ENERGY STAR recommends double-sided or image-combination options where suitable as general imaging-equipment practices, not as a Brother-specific energy guarantee.
- Toner Save: Consider it for ordinary text or draft output if your printer and driver support it. Brother warns that it makes output lighter and does not recommend it for photo or grayscale images. The cited instructions are Windows-oriented; options can differ by operating system and device. See Brother’s Windows default printer settings guidance.
- Print only when needed: ENERGY STAR gives this general advice for imaging equipment and also recommends keeping sleep settings engaged. Its guidance is not a performance claim for a particular Brother model. See ENERGY STAR’s imaging equipment guidance.
Keep the controls easy to reach
Place the printer where you can see its display and comfortably operate its buttons, with clear space to approach the panel. Avoid putting it on a shelf or behind objects if that makes the controls awkward to reach. No printer-specific reach height or ergonomic distance is established here, so prioritize an unobstructed, comfortable position rather than a particular measurement.
Do not make unplugging the printer a routine energy-saving step if you depend on network jobs; it can make the printer unavailable until power is restored. Use the printer’s supported low-power settings instead, after confirming that their wake behavior fits your setup.
Quick Recap
Best Value
- Specifications: Input:100-240V; Output:9V 1.6A; Cable length:6Ft/1.8M
- Widely Compatible: The 9V power adapter is compatible with Brother P-Touch label makers model AD24ESAW PT-1010B, PT-1010NB, PT-1010R, PT-1010S, PT-1090, PT-1090BK, PT-1230PC, PT-1280, PT-1280SR, PT-1280VP, PT-128AF, PT-1290, PT-1290BT, PT-1290BT2, PT-1290BT3, PT-1290RS, PT-1400, PT-1830C, PT-1830SC, PT-1880C, PT-1880SC, PT-1880W, PT-1890C, PT-1890SC, PT-1890W, PT-2030, PT-2030AD, PT-2030VP, PT-2100, PT-2110, PT-2730, PT-2730VP, PT-6100, PT-7100, PT-D200, PT-D200BT, PT-D200DA, PT-D200G, PT-D200MA, PT-D200SA, PT-D210, PT-E100, PT-E105, PT-E110, PT-H110, P-T
- Safety Features: The 9V power adapter includes multiple protective measures over-voltage protection, over-current protection, short-circuit protection
- Compact Design: Its compact design makes this adapter easy to minimizes clutter. It without taking up extra space, ensuring that your workspace remains organized
- Customer Support : Our team is dedicated to responding to inquiries within 24 hours, ensuring any issues are resolved promptly and satisfactorily
Rank #4
- SLIM & COMPACT: Brother Genuine AD-24 Black AC Power Adapter for use with select Brother P-touch Label Makers is slim, sleek and incredibly compact to stay out of the way when plugged in
- SAFE & VERSATILE: This 4.9-foot-long power cord has 3 safety features that provide protection against overcurrent, overvoltage and output short-circuit, safeguarding you and your P-touch devices.
- SPECIFICATIONS: 4.9-foot-long power cord; INPUT: 100-240V ~ 50/60Hz 0.6A; OUTPUT: 9V-2A.
- FOR USE WITH: PT-1010, PT-1090, PT-1230PC, PT-1280, PT-1290, PT-1830, PT-1880, PT-1890, PT-1950, PT-1960, PT-2030, PT-2100, PT-2110, PT-2430PC, PT-2730, PT-D200, PT-D210, PT-H110, and more.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
