Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more

Most Taubound failures fall into one of four paths: cross-play or squad matchmaking, Strict NAT or conflicting UDP ports, an unstable connection flagged as NETWORK NOT RESPONDING, or a Duviri mission-state problem that appears during loading or after host migration. Identify the transition where the run fails before changing settings.

Start by recording your platform, Cross Platform Play setting, squad size, exact mission transition, and whether the symptom is an empty Public Matchmaking queue, an infinite loading screen, a host-migration disconnect, or a return to the Orbiter. Then test cross-play consistency, check NAT, resolve PC port conflicts, and update the game. This order separates a local network problem from a repeatable game-state failure.

Identify the failure before changing settings

The same Taubound symptom can have different causes. A squad that cannot see one another points toward matchmaking, NAT, or cross-play. A warning that appears while other online services also fail points toward the connection itself. A loading tunnel that always follows host migration is more consistent with a mission-state or host-transition problem.

What’s actually slowing this PC down?

Pick the symptom - the matching free tool is one click away.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
What you see Record this detail First path to test
Public Matchmaking stays empty Whether every player has the same Cross Platform Play setting and whether a direct invite works Cross-play consistency, NAT, and UDP conflicts
NETWORK NOT RESPONDING Whether other games or streaming services fail at the same time Connection test, IPv6 diagnostic, then ISP escalation if the wider connection is affected
Infinite loading screen The exact transition: Teshin’s Cave, a portal, the Undercroft, extraction, or a host migration Current game build and a solo-versus-public comparison
Disconnect after host migration Who was host, when migration occurred, and whether the loading tunnel repeats Update the game and document the repeatable transition
Return to the Orbiter Whether it happens before entering, during the mission, or at extraction Separate network symptoms from a mission-state failure

Keep the notes while testing. Changing several variables at once makes it impossible to tell whether the fix was cross-play, NAT, a port conflict, or a game update.

#1 Best Overall
Sale
Compressed Air Duster,130000RPM Super Power Cordless Air Duster,Rechargeable Brushless Blower,3 Gear Adjustable Blower with LED Light,Dust Remover for Computer/House/Outdoor/Car
  • Powerful Turbo Fan:CAGIWIRU Electric Air Duster have reached speed up to 130000RPM,Can efficient remove dust and debris.With LED light and Three Adjustable Speed to meet with different cleaning tasks.
  • With Attached USB C Fasting Charging cable.Charing 3 hours,Enjoy up to 240 minutes of use on the lowest setting, For third speed can use for 25mins.with four charging options to meet with your needs.
  • Wide Application: attached 5 different nozzles,making it suitable for a variety of scenes, such as car,pet, pc, keyboards, and other electronic devices. It also serves for office and home clean duster.
  • Handy Design & Portable:Cordless air duster electric nozzle is Light weight and small size, design and comfortable to hold and space saving, convenient to carry around. You can put it in your room or inside the car without taking up space.
  • Economical &Reusable: Built durable materials with a long-lasting battery,our CAGIWIRU air duster it's a sustainable alternative to disposable air cans.

Run the quick matchmaking checks

  1. Check the game build. Install the current Warframe update on every player’s platform. Official Duviri patch notes have recorded fixes for rare matchmaking failures, clients stuck in a loading tunnel after host migration, and other state-transition errors. An old client can therefore reproduce a problem that has already been corrected.
  2. Open the game’s Options menu and record Cross Platform Play. The setting controls whether players on PC, Xbox, PlayStation, Nintendo Switch, and Mobile can enter missions together through squads or Public Matchmaking. Have every player write down whether the toggle is enabled or disabled before each test.
  3. Try a direct invite. A direct invite that works while Public Matchmaking remains empty narrows the issue to matchmaking conditions rather than proving that the mission itself is broken. If both methods fail, continue with NAT and connection checks.
  4. Compare a same-platform squad. Test with players on the same platform, preserving the same mission and host where possible. Then repeat with Cross Platform Play enabled. A failure that exists only in the mixed-platform test is useful evidence for support, but it is not by itself proof of a Taubound-specific bug.
  5. Retest the exact transition. Begin from the same entry point and note whether the failure occurs in Teshin’s Cave, at a portal, on entry to the Undercroft, during extraction, or immediately after host migration.

Do not assume that switching cross-play off is a permanent fix. Use it as an isolation test, then report the platform combination and the setting used when the failure occurred.

Fix cross-play and squad mismatches

Cross Platform Play is changed in Warframe’s Options menu. It supports missions across PC, Xbox, PlayStation, Nintendo Switch, and Mobile, but all players need to know which state they are testing. If one player changes the setting while others leave it unchanged, the result is not a controlled comparison.

Use a controlled two-test comparison

  1. Have all players enable Cross Platform Play, restart the squad attempt, and record whether Public Matchmaking finds a session.
  2. Use a direct invite with the same players and mission. Record whether the invite reaches the squad and whether the failure moves to loading.
  3. Have all players disable Cross Platform Play, then test a same-platform squad if one is available.
  4. Keep the host and mission entry point consistent. A change from Teshin’s Cave to a different Duviri route changes the game state and weakens the comparison.

If same-platform play succeeds but the mixed-platform attempt fails, include the platform list, Cross Platform Play state, squad size, and the exact transition in a support report. If neither test works, cross-play is unlikely to be the only cause; proceed to NAT and connection checks.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Resolve Strict NAT and router conditions

Warframe’s Strict NAT warning is significant, not cosmetic. The official description says: "Warframe has detected your network is suffering from a Strict NAT, this will cause you problems when connecting to games, using voice chat or seeing friends on your contact list as online." That symptom can therefore affect matchmaking, voice communication, and the friends list at the same time.

Check whether multiple devices are involved

Several PCs or consoles behind the same home network can contribute to a Strict NAT condition. Re-test after identifying how many devices are running Warframe or other applications that create NAT mappings. Do not treat a successful web connection as proof that peer connections for a game will work.

Rank #2
EVEO® Screen Cleaner Spray Kit (Streak-Free) TV Screen Cleaner for Smart TV, Lcd, LEd, Oled | Computer Screen Cleaner Spray and Wipe Microfiber Cloth - TV, Monitor, Laptop, iPad, Car - 6.7oz 1 Pack
  • Screen Cleaner is Your Screen’s New Bestfriend! - EVEO is proud to present a screen cleaner that’s perfectly suited for your TV. Meet your new screen cleaner, computer screen cleaner, laptop cleaner, iPad cleaner, Macbook,tv cleaner or any other electronic device. Our screen cleaner spray and wipe along with the included plush microfiber cloth, easily removes dust, fingerprints & other smudges on the screen’s surface. Clean effectively for a streak-free screen
  • Gentle on your Screens - Our screen cleaner spray and wipes is compatible to be used even for the most sensitive LCD, LED, CRT, and OLED screens in proper use. Be at ease knowing that this product is compatible with all the major brands: LG, SONY, Samsung, Sharp, iPad, iPhone, Android screens, Kindle, PC monitors - we’ve got you covered! Can be used as LCD screen cleaner, tv cleaner, smart tv screen cleaner, and more
  • Premium Super Soft Plush Microfiber Cloth - Included in this efficient screen cleaning kit. This screen cleaner spray and wipe has our signature plush microfiber cloth specially designed to comply with screens and monitors and leave them streak-free. Has been shown to effectively absorbs stubborn stains, zero streaks, and no fiber shedding. Always use this together with our screen cleaner for the best results
  • Easy-to-Use Screen Cleaner Kit + microfiber cleaning cloth - The EVEO Screen Cleaning Kit will easily be your new favorite tool when it comes to taking care of the things you love most, quick and easy solution for a streak-free screen. Simply screw on the sprayer gun on the screen cleaner bottle. Spray the cleaning liquid onto the microfiber cloth, then wipe the screen until desired cleanliness & shine is achieved.
  • Quality Screen Care Kit Worth Purchasing - Enjoy a convenient Screen Cleaner anytime, anywhere you need it. Your satisfaction is our top priority. We stand behind the quality of our products and that’s why, you shouldn’t be worrying at all. We manufacture the Best Screen Cleaner. and can be used for laptop cleaning kit, laptop screen cleaner, tv screen cleaner for smart tv. MacBook screen cleaner, monitor cleaner or screen cleaner spray for electronic devices with microfiber cleaning cloth

Follow the router branch that matches your equipment

Warframe’s Strict NAT guidance provides separate branches for multiple devices, UPnP or NAT-PMP, router settings, and routers that cannot be changed. Use the branch that matches your setup rather than applying random port-forwarding values from an unrelated guide. If your router is managed by a landlord, school, workplace, mobile provider, or another organization, you may not have the controls needed to change its NAT behavior.

After any router or UPnP/NAT-PMP change, restart the game and repeat the same matchmaking test. Record whether the warning disappears, whether friends become visible, and whether the failure now occurs only during loading. A NAT change that fixes the contact list but leaves a host-migration loading tunnel indicates that more than one issue may be present.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Clear UDP port conflicts on PC

Warframe’s official Ports In Use page states: "WARFRAME USES UDP PORTS 4950 AND 4955 by default." Another application using those ports can interfere with the contact list, matchmaking, and voice communication.

Change the ports from Warframe

  1. Launch Warframe and open Options.
  2. Open Gameplay.
  3. Find Network Ports [UDP].
  4. Change the values from the defaults to free UDP ports available on the PC and network.
  5. Apply the setting, restart the game, and repeat the same Taubound matchmaking test.

The exact free values depend on the other software and network equipment on your PC; do not copy a value that is already in use. If you cannot identify a conflict, close unnecessary background applications before testing.

Pay attention to torrent and NAT-PMP software

Torrent applications and other programs that use NAT-PMP can compete for network mappings or the same UDP resources. Close them completely, including background or tray processes, then restart Warframe. If the problem returns only when one of those applications is running, you have a reproducible local conflict to report or reconfigure.

Rank #3
Sale
BladeHawks RGB Gaming Mouse Pad Extra Large Extended 31.5x12 Inch-Black | LED mouse pad with 14 lighting modes, covers keyboard & mouse, anti-slip rubber base, waterproof surface, USB powered
  • 【Large size】:Measuring 800 x 300 mm/ 31. 5×12 inches, which is wider and taller than others. Large mouse pad can perfectly fit your keyboard and mouse of any size, and there is also ample space for peripherals such as phones, tablets, etc.
  • 【LED backlight mouse pad】:Blade Hawks RGB mouse pad provides 7 static modes and 7 dynamic modes will give you the options you are looking for. Power-off memory function remembers the last lighting mode you selected. The super glow fiber Chroma will give you a colorful gaming setup that you want.
  • 【Anti-slip rubber base】:Made from Natural rubber, this gaming mousepad will firmly grip your desktop, allowing you to enjoy the ultimate precision in the games you are most passionate about. It also comes with a texture that enhances this ability even further.
  • 【Smooth and waterproof surface】: Micro-textured cloth surface, for extremely precise mouse control and a smooth movement. When liquid splashes on the gaming mouse pad, it forms water droplets and slides down. Will not delay your work or gameplay.
  • 【Plug and play】: This mouse and keyboard pad is powered by USB, plug and play, no driver required. One button control light modes. Press one time to change the lighting mode, press twice to change the brightness, press and hold about 3 seconds turn ON/OFF.

Console and Mobile players do not have the PC control for changing Warframe’s UDP ports. Focus instead on the router’s NAT state, the number of devices sharing the connection, platform details, and evidence for support.

Free tools Windows power users keep installed

One-click scans. No signup required.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Handle the "NETWORK NOT RESPONDING" warning

Warframe Support defines NETWORK NOT RESPONDING as a case where the network between the player’s PC or console and Warframe’s servers is unstable or takes too long to respond. It is a connection symptom, not a diagnosis that your hardware is defective.

Use the IPv6 diagnostic path

  1. Run the connection test described by Warframe Support and note whether it identifies an IPv6 problem.
  2. If the test indicates IPv6 trouble, temporarily disable IPv6 using the operating system or router controls appropriate to your setup.
  3. Restart the affected network equipment and Warframe, then repeat the same mission transition.
  4. Re-enable IPv6 if the diagnostic does not indicate a problem or if disabling it does not change the symptom. Do not leave a network feature disabled without a test-based reason.

The diagnostic result matters: disabling IPv6 at random can hide the real cause and makes later troubleshooting harder.

Know when to contact the ISP

If similar connection failures affect other online games or streaming services, the problem is broader than Taubound matchmaking. Contact your internet service provider and supply the time of the failures, the affected services, and the connection-test result. If Warframe is the only affected service, keep working through NAT, ports, cross-play, and mission-state isolation before attributing the issue to the ISP.

Diagnose loading screens and host migration

An infinite loading screen is not automatically a slow internet connection. Duviri’s entry modes are the Duviri Experience, The Lone Story, and The Circuit; each starts from Teshin’s Cave, and The Circuit continues as an endless Undercroft mode. A failure tied to one of those transitions can be a game-state problem even when ordinary online play works.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Rank #4
Sale
Vaydeer Wrist Rest for Keyboard and Mouse, Computer Ergonomic Wrist Support Pad, Soft Memory Foam Arm Cushion for Desk, Palm Hand Office Laptop Typing
  • 【Softer and More Comfortable】Vaydeer wrist rest has unique diamond pattern, which is the combination of softness and aesthetics. The materials of wrist rest are improved into higher quality memory foam and covered with silky smooth lycra. The computer wrist rest makes you as comfortable and cushiony as like rest your wrists on clouds.
  • 【Ergonomic Wrist Saver】The wrist rests for keyboard and mouse comes with a 17.32×3.15×0.83 inch keyboard wrist pad and a 5.94×3.15×0.83 inch mouse wrist support. Based on ergonomic design, the unique concave shape is the perfect fit for your wrist joints. The wrist rest pad fits most computer keyboards and laptops, improve hand and wrist posture, release your wrist and arm stress.
  • 【Non-Slip Rubber Bottom】Featuring an anti-skid silicone base on the bottom, this wrist keyboard support stays firmly in place on your desk, preventing the padding from sliding around, ensuring stable and consistent wrist support during extended computer sessions.
  • 【Better Experience & Pain Relief】Our keyboard arm rest is beneficial to alleviate the soreness caused by direct contact and friction between your arm and a hard desk surface, reducing the risk of wrist fatigue or carpal tunnel. The soft texture of memory foam can evenly distribute the pressure around your wrists and provide good support with just enough give.
  • 【Helpful in Multiple Scenarios】Whether you're working, studying, writing, typing, gaming, this keyboard and mouse rest combo is an essential accessory to add comfort and support to your hands and wrists. It’s also a great gift for men, women, family, friend, coworker, gamer, teacher, etc.

Test solo versus public play

  1. Update every client to the current build.
  2. Enter the same Duviri or Taubound route solo, using the same entry point.
  3. Repeat it through Public Matchmaking.
  4. If possible, repeat with a direct invite and a different host.
  5. Record the first transition at which the loading screen differs.

Solo success with public failure points toward squad, NAT, cross-play, or host state. A solo failure at the same portal or Undercroft transition points more strongly toward a client or game-state issue. A failure that appears only after host migration should be described as such rather than generalized to every loading screen.

When host migration is the trigger

Official Duviri patch notes document a rare bug involving clients stuck in a loading tunnel after host migration. That history means a repeatable post-migration tunnel can be a known class of game-state failure, not evidence that your graphics hardware or home network is inherently incapable of loading the mission. It still requires current-build testing because fixes can change the behavior.

Write down who was host, what happened immediately before migration, whether the client eventually disconnected or returned to the Orbiter, and whether the same sequence works when another player hosts. A host change that moves the failure to a different stage is valuable evidence; it also means the original symptom should not be reported simply as an empty matchmaking queue.

Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Support on Ko-Fi

Use the mission transition to narrow the cause

Teshin’s Cave

If the squad fails before leaving Teshin’s Cave, concentrate on matchmaking, cross-play, NAT, and UDP conflicts. Record whether the squad forms at all and whether every player can see the others in the contact list.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Portal or mission entry

A stall at a portal after the squad has formed is a different symptom from an empty queue. Compare direct invite and Public Matchmaking, then test solo entry. Preserve the same host and route so the comparison remains meaningful.

Best Value
Sale
Under Desk Cable Management Tray No Drill, Metal Mesh Cable Management Under Desk with Clamp Mount, 2 Hole Cable Tray with Wire Management and Cord Organizer for Home Office Standing Desk
  • 【No Drill Mounted】Cable management tray can be assembled in as little as 3 minutes or less-simply. Side clips easily clampe the edge of desk, pass through the holes on the sides, and secure excess cables with baskets. Desk cable management supports inward or outward installation to meet your needs in different scenarios, and provides you with great convenience when collecting and organizing wires.
  • 【Rubber Pad Protects Desk】Wire organizer under desk built-in soft rubber pads on the clamp protect your desk from scratches, so you will not damage your furniture or office.
  • 【Sturdy and Beautiful】Cord management under desk is made of high-quality carbon steel and holds about 15 lbs. The wire basket has 2 holes on each side of the tray to enable your cables to pass freely. Cable baskets are suitable for desk thickness use from 0.4" to 2.4".
  • 【Space Saving & Keep Organized】Desk cable management tray holds all your power cords, outlet strips, USB hubs and computer transformers hidden from your feet, and the data cables will not enter the vacuum cleaner to keep your desk clean and tidy. Desk wire organizer is also suitable for use in the kitchen and outdoors.
  • 【Reduce Safety Risks】Cable tray under desk keeps all plugs away from your kids, no more worry about tripping. Using 2 holes wire tray saves extra space, helps you easily cabling and wire protection. The mesh design is not easy to accumulate dust, but avoids safety accidents caused by messy wires.

The Undercroft

The Circuit is an endless Undercroft mode. If the failure appears when entering or continuing in the Undercroft, include that exact stage and the selected Duviri mode in the report. Do not describe every Duviri problem as a Circuit problem unless the transition is repeatable there.

Extraction or return to the Orbiter

A disconnect at extraction can follow a network timeout, host transition, or mission-state error. Note whether other squad members complete extraction, whether you receive a connection warning, and whether the game returns normally to the Orbiter on a solo run.

Choose the right troubleshooting path

Pattern More likely path Useful comparison
Joining, voice chat, and friends list are all affected Strict NAT or UDP conflict Check NAT guidance, close port-using applications, and test the PC UDP setting
Several online games and streaming services fail Unstable connection or ISP issue Run the connection and IPv6 diagnostic, then contact the ISP if the wider failure continues
Only mixed-platform squads fail Cross-play path Compare Cross Platform Play enabled and disabled with the same players
Failure repeats after host migration Host-transition or mission-state issue Change the host, update the game, and capture the loading sequence
Solo works but public play does not Squad, NAT, cross-play, or matchmaking condition Compare direct invite, same-platform play, and mixed-platform play

These patterns are decision aids, not proof of cause. The same account can have a NAT problem and encounter a separate loading bug in the same session.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Prepare a support report that can be acted on

Warframe requests the platform, screenshots or video, and, for PC, the EE.log when investigating reports. A crash report can also provide a WAR number. Include enough context for someone else to reproduce the transition.

Include these facts

  • Platform and, when relevant, the platforms of every squad member.
  • Cross Platform Play state for each test.
  • Squad size, host identity, and whether the test used Public Matchmaking or a direct invite.
  • The selected Taubound or Duviri mode and the exact entry point: Teshin’s Cave, portal, Undercroft, extraction, or return to the Orbiter.
  • The visible symptom and its wording, including NETWORK NOT RESPONDING or a Strict NAT warning.
  • Date and approximate UTC time, plus whether the sequence is repeatable.
  • What changed between successful and failed tests, such as a different host, cross-play state, network, or game build.
  • Screenshots or a video showing the loading tunnel, disconnect, warning, or matchmaking result.
  • For PC, the EE.log; for a crash, the WAR number supplied by the crash reporter.

Do not claim that a Taubound-specific bug is confirmed unless an official notice identifies it. Describe the observed transition precisely and let the reproducible evidence distinguish a network path from a game-state path.

What not to do

  • Do not disable Cross Platform Play and call the issue solved without testing the same mission with the setting enabled again.
  • Do not change random router or port values while torrent or NAT-PMP software remains active.
  • Do not disable IPv6 permanently unless the official diagnostic indicates an IPv6 problem.
  • Do not treat one slow loading screen as proof of a hardware failure.
  • Do not combine a host-migration tunnel, a Strict NAT warning, and an empty queue into one undifferentiated report.
  • Do not invent a loading-time target or resolution percentage; no authoritative average or Taubound-specific success rate is established.

Bottom line for Taubound troubleshooting

Start with the exact failure transition, then test the least invasive explanation: synchronized Cross Platform Play settings and a direct invite. If joining, voice, or contacts are affected, follow the Strict NAT branch and eliminate PC UDP conflicts involving ports 4950 and 4955. For NETWORK NOT RESPONDING, use the IPv6 diagnostic and involve the ISP only when other online services show the same instability. Finally, update the game and compare solo, public, direct-invite, and alternate-host runs. A repeatable failure at a Duviri transition or after host migration should be documented as a game-state symptom with logs and video, not assumed to be a problem with your hardware.

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.