Windows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallCrashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteTo create a basic 3D model in AutoCAD, draw a closed 2D outline, turn it into a solid with EXTRUDE or PRESSPULL, then use PRESSPULL on a face to cut a simple hole. Switch to the 3D Modeling workspace and an isometric view first. The steps below use a rectangle as an illustrative example; choose dimensions that suit your own drawing.
Start in the 3D Modeling workspace
AutoCAD’s 3D Modeling workspace groups the solid, surface, and mesh tools used for this workflow. If you are not already in it, switch to 3D Modeling. Autodesk’s EXTRUDE instructions also direct users to this workspace when needed. Tool placement can vary by AutoCAD release and platform, but the commands can be entered by name.
Draw a closed 2D profile
- Draw a simple planar outline, such as a rectangle or circle, using the usual 2D drawing tools.
- Make sure the outline is closed if you want a solid. Autodesk documents that PRESSPULL can turn a closed 2D object or bounded area into a solid, while an open object such as an arc can produce a surface instead. See Autodesk’s PRESSPULL guidance.
Create the solid with EXTRUDE or PRESSPULL
Both commands can turn a suitable profile into 3D geometry, but the interaction differs. Choose based on whether you want to specify a height for selected geometry or pull a profile interactively.
| Command | How to use it | Documented behavior |
|---|---|---|
| EXTRUDE | Run EXTRUDE, select the profile, and enter a height. |
Extrudes selected objects or edge subobjects. Whether the source geometry is retained depends on the DELOBJ setting. Autodesk EXTRUDE help |
| PRESSPULL | Run PRESSPULL, click inside the closed profile or bounded area, establish the direction, and enter a distance. |
Can create a solid from a closed profile or bounded area. An open 2D object can create a surface, and extrusion direction depends on the planar object and current UCS. Autodesk PRESSPULL help |
For a first model, for example, extrude a closed rectangle to a height you choose. This produces a simple solid block; the example does not prescribe drawing units or dimensions.
Free tools Windows power users keep installed
One-click scans. No signup required.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
Switch to an isometric view
Before editing the solid, change to an isometric view so you can see its top and sides. Autodesk recommends an isometric view for press or pull operations. The exact view controls vary across AutoCAD versions and platforms; use the view controls available in your installation.
Cut a hole with PRESSPULL
- Draw a closed shape, such as a circle, on the solid face where you want the hole.
- Run
PRESSPULLand click inside the bounded shape. - Push the shape toward the interior of the solid and enter a distance sufficient to cut through the part if you want a through-hole.
PRESSPULL can modify a solid face as well as create geometry from a profile. Its direction depends on the planar object and current UCS, so check the preview and direction before confirming.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Check whether the result is a solid
Inspect the model in the isometric view. If PRESSPULL produced a surface instead of a volume, check whether the profile was open; Autodesk documents that open objects can create surfaces. Return to the profile, close it, and repeat the operation when a solid is intended.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.What to know about versions and interface differences
The relevant Autodesk help covers AutoCAD 2025/2026 PRESSPULL material and a 2020 EXTRUDE page. Command behavior described here is grounded in those pages, but ribbon locations and interface details can differ by release and platform. This workflow does not depend on a particular operating system, drawing unit, or object size.
Recommended Free Tools
Quick Recap
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
