iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
Your Windows saves are in %USERPROFILE%/AppData/LocalLow/CyberneticWalrus/Rip It! Card Collector/Data/SavedGame. The files are reported as .bin saves. Exit the game, copy the entire SavedGame folder to a dated location (and preferably a USB flash drive or portable SSD), then copy those files back to the same path when you need to restore or move your progress. Keep the existing folder as a rollback copy until you have opened the game and confirmed your collection.
Where Rip It! Card Collector stores saves
On Windows, the documented save directory is:
%USERPROFILE%/AppData/LocalLow/CyberneticWalrus/Rip It! Card Collector/Data/SavedGame
The reported file pattern is *.bin, so one or more binary files in that folder hold the game’s local progress. The %USERPROFILE% part resolves to your Windows account folder, such as C:UsersAlex; do not replace it with another account name when using the path.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
The folder is under AppData, which Windows hides by default. Pasting the complete path into File Explorer’s address bar is more reliable than trying to browse to it manually.
#1 Best Overall
- Easily store and access 2TB to content on the go with the Seagate Portable Drive, a USB external hard drive
- Designed to work with Windows or Mac computers, this external hard drive makes backup a snap just drag and drop
- To get set up, connect the portable hard drive to a computer for automatic recognition no software required
- This USB drive provides plug and play simplicity with the included 18 inch USB 3.0 cable
- The available storage capacity may vary.
Open the folder directly
- Exit Rip It! Card Collector. Wait for the game window and its launcher to close before touching the files.
- Open File Explorer with
Windows + E. - Click the address bar, paste
%USERPROFILE%/AppData/LocalLow/CyberneticWalrus/Rip It! Card Collector/Data/SavedGame, and pressEnter. - If the folder exists, you should see the game’s
.binfiles. Leave the folder open while you make the backup.
If File Explorer says the location cannot be found, check spelling and punctuation, confirm that you are signed in to the Windows account that runs the game, and launch the game once before checking again. A newly installed game may not create its save directory until it has started far enough to initialize a profile.
Back up your progress before changing anything
A safe backup is a copy of the whole SavedGame folder, not just one file selected by guesswork. Keeping the directory structure and every .bin file together gives you the best chance of restoring the same profile after a reinstall or a computer change.
Recommended dated-copy procedure
- Close Rip It! Card Collector completely. Do not copy while a save is being written.
- Navigate to the documented path and select the
SavedGamefolder. - Use
Copy, then create a new folder in a separate location. Give it a date-based name such asRipIt-Card-Collector-SavedGame-2026-10-19. - Paste the folder into that dated location. The copied folder should still contain the
.binfiles. - Open the destination and confirm that the files are present. Check the copy operation for any error dialog rather than assuming it completed.
- Make a second copy on removable storage, such as a USB flash drive or portable SSD. Eject that device safely after copying.
The date in the folder name is important when you keep several snapshots. It lets you identify which copy predates a failed update, an accidental deletion, or a cloud-sync overwrite without opening files whose format is not human-readable.
Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Repair Windows errors before they cause bigger problems3Scan for outdated or missing drivers - takes under a minuteRank #2
- Easily store and access 5TB of content on the go with the Seagate portable drive, a USB external hard Drive
- Designed to work with Windows or Mac computers, this external hard drive makes backup a snap just drag and drop
- To get set up, connect the portable hard drive to a computer for automatic recognition software required
- This USB drive provides plug and play simplicity with the included 18 inch USB 3.0 cable
- The available storage capacity may vary.
What to copy and what not to change
- Copy: the entire
SavedGamedirectory and all of its.bincontents. - Do not rename: individual
.binfiles unless you are deliberately testing a rollback and have another untouched copy. - Do not edit: the binary contents in a text editor. A modified file may no longer be readable by the game.
- Do not delete the original: retain the working folder until the backup has been checked and, if needed, tested.
Choose a backup destination
The destination should be outside the game’s working directory. A second copy protects you if a reinstall removes the local folder or if a synchronization service replaces a good save with an older one.
| Destination | Best use | Advantages | Limitations |
|---|---|---|---|
| Another folder on the same PC | Quick rollback during troubleshooting | Fast and convenient; no extra device required | Does not protect against drive failure, theft, or a system reset |
| USB flash drive | One or several small dated save snapshots | Portable, inexpensive, and easy to disconnect from the PC | Easy to misplace; use a reputable device and eject it safely |
| Portable SSD | Frequent snapshots or a wider PC backup | More capacity and generally faster transfers than a basic flash drive | Costs more and still needs physical protection from loss or damage |
For this game’s small save files, capacity is rarely the deciding factor. Independence is: an offline removable copy remains available if a sync operation or a damaged Windows installation changes the files on the computer.
Verify that a backup is usable
Windows can report a successful copy even when you have copied the wrong folder. Verification is a short visual check:
Rank #3
- Easily store and access 1TB to content on the go with the Seagate Portable Drive, a USB external hard drive.Specific uses: Personal
- Designed to work with Windows or Mac computers, this external hard drive makes backup a snap just drag and drop. Reformatting may be required for Mac
- To get set up, connect the portable hard drive to a computer for automatic recognition no software required
- This USB drive provides plug and play simplicity with the included 18 inch USB 3.0 cable
- The available storage capacity may vary.
- Open the dated destination folder.
- Open its
SavedGamesubfolder. - Confirm that the expected
.binfiles are visible and that their file sizes are not zero bytes. - Compare the number of files with the source folder while both locations are open.
- Safely eject the USB flash drive or portable SSD after the copy has finished.
A .bin file is not meant to open as readable text. The useful test is whether the files are present, complete, and later accepted by the game—not whether Windows can display their contents.
Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallRestore a save after reinstalling or losing progress
Restoration is a file replacement, not a special in-game import. Preserve the current folder first so you can undo the operation if the wrong snapshot was selected.
Restore to the same Windows installation
- Exit Rip It! Card Collector and make sure it is no longer running.
- Open
%USERPROFILE%/AppData/LocalLow/CyberneticWalrus/Rip It! Card Collector/Data/SavedGamein File Explorer. - Rename the current
SavedGamefolder to something such asSavedGame-before-restore-2026-10-19. This is your rollback copy. - If the expected path is missing, recreate the
DataandSavedGamefolders exactly as shown, or start the game once and close it to let the game create them. - Open your dated backup, copy its complete
SavedGamefolder (including every.binfile), and paste it into the documentedDatadirectory. - Launch the game and inspect the collection, unlocks, and other visible progress.
- Keep the renamed rollback folder until you are certain the restored state is correct. Delete it only after the verification is complete.
If Windows asks whether to merge folders, allow the backed-up files to be copied into the newly created SavedGame directory. If it asks whether to replace files, stop and check that the game is closed and that you selected the intended dated snapshot.
Rank #4
- Easily store and access 4TB of content on the go with the Seagate Portable Drive, a USB external hard drive.Specific uses: Personal
- Designed to work with Windows or Mac computers, this external hard drive makes backup a snap just drag and drop
- To get set up, connect the portable hard drive to a computer for automatic recognition no software required
- This USB drive provides plug and play simplicity with the included 18 inch USB 3.0 cable
- The available storage capacity may vary.
Restore on a different PC
- On the old PC, close the game and create a dated backup using the procedure above.
- Copy that dated folder to a USB flash drive, portable SSD, or another transfer method you control.
- Install Rip It! Card Collector on the new Windows PC and run it once, then exit. This can create the required local directory.
- On the new PC, open the path under that PC’s own
%USERPROFILE%variable. Do not paste the old computer’s fullC:Users...path if the account name is different. - Rename any newly created
SavedGamefolder as a safety copy. - Copy the backed-up
.binfiles into%USERPROFILE%/AppData/LocalLow/CyberneticWalrus/Rip It! Card Collector/Data/SavedGame. - Start the game and confirm that the expected progress appears before removing any backup.
The procedure transfers the files; it does not establish that every setting, achievement, or cloud-managed item is portable. The documented evidence concerns the local .bin saves, so judge success by the progress the game actually displays.
Steam Cloud: useful, but not a substitute for a dated copy
SteamDB’s user-file-system record marks Rip It! Card Collector as Steam Cloud-enabled and lists the local path above. That indicates cloud support in the metadata, but the available record does not specify when synchronization occurs, how long versions are retained, whether a conflict prompt appears, or whether a manual download action is available for this title.
Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Clear out junk files and repair common Windows errorsFree Scan →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Because those behaviors are not documented here, make a local dated copy before reinstalling, replacing files, or moving to another PC. Treat Steam Cloud as an additional synchronization mechanism rather than as your only recovery plan.
Best Value
- [Upgraded Version] - This external hard drive features a mirrored logo stripe combined with a striped anti-slip design, and the rounded corners of the casing make it easier to grip. The stripes also have a heat dissipation function, ensuring stable and fast data transfer.
- 【Ultra-thin and quiet】 - The motherboard adopts JMicron 578 noise-free solution, giving you a quiet working environment. Lightweight and portable size designed to fit in your pocket for easy portability.
- 【Ultra-Fast Data Transfers】 - Pairing this external hard drive with JMicron 578 solution USB 3.0 and USB 2.0 interfaces enables blazing-fast data transfer. It boasts theoretical read speeds of up to 125MB/s and write speeds of up to 103MB/s.
- 【Plug and Play】 - With no software to install, just plug it in and the drive is ready to use.The hard disk chip is wrapped with an aluminum anti-interference layer to increase heat dissipation and protect data.
- 【What You Get】 - 1 x Portable Hard Drive, 1 x USB 3.0 Cable, 1 x User Manual, Gift-type shell packaging ,Three-year manufacturer's warranty and free technical support services.
When a cloud copy and local copy disagree
- Do not repeatedly launch the game while deciding which state to keep; each launch can give a synchronization system another opportunity to update files.
- Preserve the current local
SavedGamefolder under a new name before replacing anything. - Use the dated offline backup as the known reference, copy it back to the documented path, and then launch once to check the result.
- If Steam presents a conflict dialog, read the timestamps and choose deliberately. The title-specific retention and conflict rules are not established by the available metadata.
Cloud services and Apple devices
Apple’s platform guidance says that supported games can use iCloud and Game Center to keep progress and game saves up to date across devices when the same Apple Account is used. That is general guidance; it does not show that Rip It! Card Collector’s Windows .bin files are stored in iCloud or that an Apple device can restore them. For this Windows title, rely on the documented local folder and your own dated copies unless the game’s developer explicitly documents another platform-specific method.
Troubleshooting common backup and restore problems
The path opens an empty folder
- Confirm that the game is installed and has been run at least once.
- Check that File Explorer resolved
%USERPROFILE%to the account that plays the game. - Look for a typo in
CyberneticWalrus, the game title, or theData/SavedGamesequence. - Enable View > Show > Hidden items if you are browsing rather than pasting the path.
Do not create arbitrary files in another directory simply because it is easier to find. The documented location is the one to check first.
The game starts with no progress after copying
- Exit the game again and verify that the files were copied into the inner
SavedGamefolder, not one level above it. - Check that the backup contains all of the original
.binfiles, not a shortcut to the old PC. - Confirm that the copied files are not zero bytes and that you selected the correct dated snapshot.
- Try the rollback folder you preserved, changing only one variable at a time.
If none of the snapshots load, the available documentation does not provide a developer recovery utility or a way to repair a damaged binary. Keep the original files intact rather than experimenting on your only copy.
Free tools Windows power users keep installed
One-click scans. No signup required.
Windows refuses to copy or replace a file
- Close the game and any launcher window that may still be using the save.
- Copy to a folder where your Windows account has write permission, then move the backup to removable storage.
- Check that the destination drive has free space and is not write-protected.
- Use a new dated destination instead of overwriting an older backup.
The restored state is older than expected
Open the dated backup names and select the snapshot created immediately before the event that caused the loss. A cloud synchronization event may also have replaced local files; preserve both states before trying another restore so you can return to either one.
Quick Recap
Safe habits for long-term save protection
- Create a fresh dated snapshot before reinstalling the game, changing Windows accounts, replacing a drive, or moving to another PC.
- Keep one copy on the computer for convenience and another disconnected copy on removable storage.
- Never overwrite your only backup with a newer copy.
- Use clear names that include the game and date, for example
RipIt-Card-Collector-SavedGame-2026-10-19. - Close the game before every copy and restore operation.
- Retain the pre-restore folder until the game has displayed the expected collection and progress.
- Periodically open the backup location and confirm that the files still exist on the removable device.
Quick reference
| Task | Action |
|---|---|
| Find saves | Open %USERPROFILE%/AppData/LocalLow/CyberneticWalrus/Rip It! Card Collector/Data/SavedGame. |
| File type | Back up every reported .bin file. |
| Make a backup | Exit the game, copy the whole SavedGame folder, and store a dated copy elsewhere. |
| Restore | Exit the game, rename the current folder, then copy the backed-up files into the same documented path. |
| Move to another PC | Transfer the dated folder, run the game once on the new PC, then replace its newly created saves. |
| Steam Cloud | Metadata lists support, but synchronization timing, conflicts, and retention are not specified; keep an independent local copy. |
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
