Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Repair Windows errors before they cause bigger problems3Fix the driver behind crashes, sound loss and screen glitchesAdd the logo to the OBS scene as an Image source, put it above the looping video in the Sources list, then position and size it in the preview. The logo is a separate layer: it does not set the stream’s resolution, frame rate, or bitrate. Configure and test those encoder settings separately before going live.
Add the logo to the loop scene
- Open the OBS scene that carries your loop. Keep the logo in this scene so it appears while that scene is active.
- Add an Image source. In the Sources list, add an Image source and choose the logo file. OBS’s knowledge base lists Image Sources, and YouTube describes encoder streams as supporting overlays. OBS Project Knowledge Base · YouTube live streaming tips
- Layer it above the loop. In Sources, place the logo source above the video source. If it is behind the video, it will not be visible over the picture.
- Size and position it in the preview. Keep the mark within the picture area and clear of important text, focal details, and the screen edges. These are composition recommendations, not YouTube requirements.
- Keep the logo separate. A separate source lets you move, resize, hide, or replace the mark without editing the underlying loop video.
OBS interface labels and workflows can vary by version. The source documentation cited here identifies Image Sources but does not establish a version-specific click-by-click sequence.
Set up the 4K 60fps encoder output separately
The overlay itself does not determine stream quality. You need a 3840×2160 canvas and output at 60 fps, and a source and system capable of sustaining that output. YouTube’s encoder settings guidance, accessed October 3, 2026, gives the following bitrate figures for 4K/2160p at 60 fps:
| Codec | Minimum bitrate | Recommended bitrate |
|---|---|---|
| AV1 or H.265 (HEVC) | 10 Mbps | 35 Mbps |
| H.264 | 14 Mbps | 50 Mbps |
These are YouTube’s published figures, not a guarantee that a particular computer, encoder, or connection can sustain a stream. Choose a bitrate for the codec you are actually using; the H.264 recommendation does not apply to AV1 or H.265. YouTube recommends CBR, a 2-second keyframe interval (maximum 4 seconds), and RTMPS. Its guidance says encoder frame rates up to 60 fps are supported. YouTube’s encoder settings, bitrates, and resolutions
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
#1 Best Overall
- 【1080P HD High Quality】Capture resolution up to 1080p for video source and it is ideal for all HDMI devices such as PS4, PS3, Xbox One, Xbox 360, Wii U, DVDs, DSLR, Camera, Security Camera and set top box. Note: Video input supports 4K30/60Hz and 1080p120/144Hz. Does not support 4K120Hz/144Hz. Output supports up to 2K30Hz.
- 【Plug and Play】No driver or external power supply required, true PnP. Once plugged in, the device is identified automatically as a webcam. Detect input and adjust output automatically. Won't occupy CPU, optional audio capture. No freeze with correct setting.
- 【Compatible with Multiple Systems】suitable for Windows and Mac OS. High speed USB 3.0 technology and superior low latency technology makes it easier for you to transmit live streaming to Twitch, Youtube, Facebook, Twitter, OBS, Potplayer and VLC.
- 【HDMI LOOP-OUT】Based on the high-speed USB 3.0 technology, it can capture one single channel HD HDMI video signal. There is no delay when you are playing game live.
- 【Support Mic-in for Commentary】Rybozen capture card has microphone input and you can use it to add external commentary when playing a game. Please note: it only accepts 3.5mm TRS standard microphone headset.
YouTube detects encoder settings automatically by default. A custom stream key allows manual resolution settings. YouTube transcodes live streams into multiple output formats for viewers. At 4K/2160p, YouTube says its low-latency option is unavailable and streams use normal latency.
Preview and test before going public
- Check the YouTube Live Control Room preview before starting the public stream.
- Test with representative loop movement and audio, rather than relying only on a static frame.
- Check that the logo is visible, correctly layered, and not covering essential content.
- Monitor stream health and audio/video quality during the test. YouTube recommends using a preview and checking stream health. Create a YouTube live stream with an encoder
Common problems and fixes
- The logo is missing: Check that the Image source is enabled and above the video source in Sources.
- The logo covers text or important imagery: Reposition or resize it in the OBS preview; placement is a design choice, not an encoder setting.
- The stream is not 4K or 60 fps: Check the canvas and output resolution and frame rate, then review YouTube’s preview and stream-health information. The logo source does not change these settings.
- Stream health reports problems: Confirm the selected codec’s bitrate against YouTube’s 4K60 guidance and check that the encoder and connection can sustain the output. Use CBR and the recommended keyframe interval.
- A test looks different from the local preview: Review the Live Control Room preview and test with representative motion and audio before publishing; YouTube transcodes the incoming stream for viewers.
Or let it run in the cloud
If your goal is a continuous prerecorded-video stream, StreamNeo is an alternative to leaving OBS and a computer running at home. Upload a recording or build a playlist, add your YouTube stream key, and go live. StreamNeo loops uploaded videos from the cloud; it does not broadcast a camera feed. Your computer can be off, and the service automatically recovers if YouTube drops the stream. Your upload streams as made, up to 4K 60fps, at one price per slot; the first day is free with no card. Monthly: $9.99 per month. StreamNeo is YouTube-only. See StreamNeo, or start the free first day.
Quick Recap
Rank #4
- High-Quality Video Capture, 4K HDMI Capture Card Ready: Capture smooth and vibrant video with this 4K HDMI capture card, engineered for gamers and content creators who demand crisp 1080P 60FPS video quality. Whether you're streaming to Twitch or recording gameplay for YouTube, your footage will look professional and detailed
- Plug-and-Play USB Capture Card, No Drivers Needed: Designed as a USB capture card for streaming, this device works instantly out of the box, just plug into your PC or laptop and start capturing. Fully compatible with popular software like OBS Studio, Streamlabs, and XSplit, making setup quick and stress-free for beginners and pros alike
- Universal Compatibility PS5, Xbox, Switch & More: Stream or record gameplay from virtually any HDMI-enabled device including Nintendo Switch, PS5, Xbox Series X, DSLR cameras, and PCs. The video capture card for gaming supports seamless passthrough so you can play without lag while your audience watches every frame in real time
- Low-Latency Performance for Smooth Streaming: This capture card for streaming minimizes delay between gameplay and broadcast, so you get reliable, low-latency capture that works well for competitive gaming, live broadcasts, and podcast sessions. Suitable for those building their channel with high-quality, engaging content
- Compact & Portable Design for Content Creators: Lightweight and portable, this USB 3.0 capture card works well for creators who travel or switch gaming setups often. Throw it in your bag and stream or record wherever you are, at home, events, LAN parties, streaming or studio sessions
Rank #3
- Turn Your Camera into a Pro Webcam: Connect your DSLR or mirrorless camera to any computer and go live in stunning quality
- Stunning quality: Stream and record in 1080p60 or even 4K60 for razor-sharp detail (Requires a compatible camera and the latest Cam Link 4K model)
- Connect More Than Just Cameras: Use a camcorder, action cam, or even your iPhone to level up your content
- No Lag, No Delays: Ultra-low latency keeps your video and audio perfectly in sync, just like it should be
- Your iPad, Now a Pro Field Monitor: Preview your shots in real time on an iPad with USB-C
Rank #2
- Seamless Broadcasting and Versatile Streaming: Connect effortlessly to any app such as OBS, Streamlabs, Twitch Studio, Restream, Zoom, Teams, and stream flawlessly on various platforms like YouTube, Twitch, Discord, Facebook Gaming, etc., providing you with unparalleled flexibility and reach.
- Next-gen capture: Unleash the full potential of your content with cutting-edge 4K resolution, delivering crystal-clear visuals at an impressive 144 frames per second.
- HDMI 2.1 in/out: Elevate your recording capabilities with HDMI 2.1 support, allowing you to document high frame rates up to 240fps in glorious 1080p resolution for an unparalleled viewing experience.
- VRR passthrough: Immerse yourself completely in the gaming experience as our Variable Refresh Rate (VRR) passthrough ensures flawlessly smooth gameplay, eliminating screen tearing for an uninterrupted visual feast.
- Ultra-low latency: Stay in the moment with ultra-low latency powered by USB 3.2 Gen 2, ensuring your broadcast and gameplay remain perfectly synchronized, delivering an immersive and responsive streaming experience.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
