The Tool Desk
Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →You can 3D print BMO from user-created model files, but the available designs do not share one set of settings or license terms. Choose a listing first, then use the print profile documented for that specific model; the Pinshape file is described as a one-piece print with no supports, while a separate MakerWorld profile lists different settings.
Where to find a BMO STL for 3D printing
These are user-created fan models, not listings established as official Adventure Time merchandise. The options documented here differ in file formats, print guidance, and reuse terms.
| Listing | Files and construction | Documented print details | License information |
|---|---|---|---|
| MakerWorld, Fessui | The listing describes a BMO figure. Search-result information identifies a model profile; delivered format details are not stated in the cited listing information. | One profile lists 0.16 mm layer height, two walls, 15% infill, and an estimated 14.1-hour print. | Search-result information identifies a Creative Commons Attribution license; check the live listing for full terms. |
| Pinshape, ChaosCoreTech | One STL file, named bmo.stl; described as a one-piece print. |
The listing says no supports are needed. Its historical settings are 0.3 mm layer height and 20% infill. | CC BY-SA; attribution and share-alike terms apply. |
| Cults3D, 4byps | Three STL files with distinct listed dimensions. | Print settings are not stated in the retrieved listing information. | Not clear from the retrieved listing information; check the live page before reuse. |
The available listing information does not provide a controlled comparison of print quality, so file count or profile settings alone cannot establish which model will look or print best. Inspect the model page and preview before downloading to confirm the design, files, and current terms.
How to print the Pinshape BMO file
The Pinshape page for ChaosCoreTech’s BMO – Adventure Time! provides the most complete setup notes among these listings. It was published on 2016-04-02, so treat the printer, filament brand, and settings below as the creator’s historical report—not as requirements or a current recommendation.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
- Download
bmo.stlfrom the Pinshape model page and open it in your slicer. - Orient and preview the model in the slicer. The creator describes it as designed to print in one piece without supports; check the sliced preview for your printer and chosen orientation before starting.
- Use the listing’s reported settings as a starting reference: 0.3 mm layer height and 20% infill. Adjust for your printer, material, and preferred finish rather than assuming those historical settings are universal.
- Slice the file, review the estimated material and time in your own slicer, then send the sliced job to a compatible 3D printer.
The creator reported printing the model on a Robo 3D R1 with Hatchbox White PLA. That is an example of one historical setup, not a required printer or filament brand. PLA is the material identified in that report; color and brand are up to you.
Why MakerWorld settings should not be copied to another BMO
The MakerWorld profile belongs to a different model from Pinshape. Its reported 0.16 mm layer height, two walls, 15% infill, and estimated 14.1 hours apply to that profile only. A different model’s geometry, scale, and profile can change both settings and print time, so use the selected listing’s own profile when available.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Check the model license before sharing or selling
A model-file license governs reuse of that creator’s file; it does not by itself establish permission from the rights holder for the Adventure Time character. The Pinshape listing identifies CC BY-SA, which requires attribution and share-alike treatment under its stated license terms. MakerWorld’s search result identifies Creative Commons Attribution, but its full terms should be confirmed on the live page. The retrieved Cults3D listing information does not clearly state its license. Check the exact listing before remixing, redistributing files, or selling prints; these listings do not establish that the fan models are officially licensed.
Quick Recap
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
