The Tool Desk
Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Running a PC continuously for a YouTube loop uses an estimated 175.2 kWh per year at 20 watts, 350.4 kWh at 40 watts, and 700.8 kWh at 80 watts. At the U.S. Energy Information Administration’s 2025 average residential rate of 17.30¢ per kWh, that works out to about $30.31, $60.62, or $121.24 per year in energy costs. Your bill depends on your electricity rate and the PC’s actual wall draw.
Estimated electricity use and cost
The estimates below assume the PC draws the stated amount continuously for 24 hours a day, 365 days a year. Monthly use is annual use divided by 12. Costs use $0.173 per kWh, the EIA’s 2025 U.S. average residential electricity price; the EIA notes that the underlying 2025 price data are preliminary. These are energy-only estimates, not complete bill predictions.
| Assumed wall draw | Energy per day | Energy per average month | Energy per year | Cost per day | Cost per average month | Cost per year |
|---|---|---|---|---|---|---|
| 20 W | 0.48 kWh | 14.6 kWh | 175.2 kWh | About $0.08 | $2.53 | $30.31 |
| 40 W | 0.96 kWh | 29.2 kWh | 350.4 kWh | About $0.17 | $5.05 | $60.62 |
| 80 W | 1.92 kWh | 58.4 kWh | 700.8 kWh | About $0.33 | $10.10 | $121.24 |
The wattages are scenarios, not measured or typical draws for a particular YouTube-loop PC. The EIA defines a kilowatt-hour as a kilowatt used for one hour; energy use is power accumulated over time. EIA: Measuring electricity.
Calculate the cost using your electricity rate
Use this formula for a continuous load:
Energy (kWh) = power (W) ÷ 1,000 × hours of use
Then multiply the resulting kWh by the price per kWh that applies to your home. For example, at 25¢ per kWh, the estimated annual energy-only costs are $43.80 at 20 W, $87.60 at 40 W, and $175.20 at 80 W.
#1 Best Overall
- Various Monitoring Parameters: The power meter plug can monitor the power (W), energy (kWh), volts, amps, hertz, power factor, cost, minimum and maximum power (W), cumulative days and time of your appliances. By switching 7 display modes, you can easily know the various parameters while the appliance is working. The home energy monitor can also calculate and display how much power your appliance uses and how much electricity bill it cost in cumulative time
- Upgraded LCD Display: With large screen size 2.36 inch x 1.85 inch, clearer monitor backlit, our electrical usage monitor can display the data clearer and more visible no matter day or night. 180°full wide viewing angles is great for reading and recording the data in any angles. No need to stand on the front of the display and bend over to read the numbers
- Adjustable Backlight Time: Our upgraded watt meter has 5 options of backlight time. The default backlight time duration is 10 minutes(bL-0). If you want to change the backlight time, you can press and hold "UP" and "DOWN" button at the same time to enter backlight time setting, then press "UP" and "DOWN" to select the backlight time (bL-0 =10 minutes, bL-1=1 hour, bL-2=4 hours, bL-3=8 hours, bL-4=always on), finally press the "COST" to save the backlight time settings
- Overload protection: When the power of the appliance exceeds the overload power, the LCD will display “OVERLOAD” to warn the user. All the buttons will quit working and can only be workable when you lower or remove the load power. The default overload power is 3680W and is adjustable from 0 to 3680W. In general, you need to set the overload power to 1800W before using. Just press the "function" button for more than 3 seconds to enter the setting
- Data Memory Function: The wattage meter will record your power consumption data when you remove it from socket, or remove appliances from the electricity monitor. You can directly see the last data when you use it next time. This function can also automatically save the data when there is a sudden power failure
The EIA’s 2025 U.S. average residential rate was 17.30¢/kWh, but an average is not necessarily your utility’s rate. The EIA describes its average retail price as a weighted revenue-to-sales measure, not an individual customer tariff. Prices also vary by location: its 2025 state averages across all customer types ranged from 8.20¢/kWh in North Dakota to 35.72¢/kWh in Hawaii. The data are preliminary, and the state figures are all-sector averages, not residential rates. EIA: Prices and factors affecting prices; EIA Electric Power Annual, final 2024 data.
Taxes, fixed charges, time-of-use pricing, and billing rules can change the amount on your bill. The table isolates the energy cost attributable to the assumed load and does not include those factors.
Rank #2
- Multi-function power monitor: Our electric usage monitor can monitor the power (W), electricity(kWh), voltage(V), frequency(Hz), current(A), power factor(PF), unit price($/kWh), total cost($) of your appliances. By switching 8 display modes, you can easily know the various parameters while the appliance is working. The “electricity” mode can calculate and display how much power your appliance uses. And the “total cost” mode will show how much electricity bill it cost in cumulative time
- Overload protection: When the loading power of the appliance is over the default overload threshold 1800W, the whole display with backlight and the word “OVERLOAD” will keep flashing to warn the users. Please turn off the appliance for safety concern
- Premium Material: The whole body of our energy meter is made of high-quality ABS material. It makes our home electricity usage monitor more long lasting, fireproof and anti-drop. The standard US socket and plug is suitable for all US standard appliances
- Backlight Display: With white backlight and black words, the LCD display of our home power monitor can display the data clearer and help you to read the data easier no matter day or night. The backlight will only lights up when the device is connected to AC power. If no button is pressed, the backlight turns off automatically after 10 minutes. You can also press the "UP" button to turn off the backlight manually, and press any button to turn on backlight again
- Easy to reset: No reset tool needed, our appliance power usage meter is easy to reset. You can press the “M” button for 5 seconds directly to reset the device. After reset, all cumulative data (electricity quantity, cost) will be cleared, and all settings will be restored to factory settings
What 20, 40, and 80 watts tell you—and what they do not
These figures only show what happens if a setup continuously draws the stated power at the wall. They do not establish the draw of a specific computer. Actual consumption can vary with the PC and its components, display arrangement, browser settings, playback quality, and operating conditions. A monitor or other equipment left on with the PC adds to the total if it is included in the measured setup.
Measure the full setup for a personal estimate
If you need a closer cost estimate, measure the equipment at the outlet while it is playing the loop under representative conditions. Include the PC and any display or peripherals whose electricity cost you want to count. A plug-in electricity usage monitor can show outlet consumption; the EIA also explains that utility meters measure consumption and some advanced smart meters can track individual-device use. EIA: Measuring electricity.
Rank #3
- Intuitive Electric Usage Monitoring: Measure power (W), volts, amps, frequency, power factor, max/min power (W), cumulative time, and energy (kWh) with this watt meter; Automatically calculate costs based on set prices and track home energy usage for efficient electricity savings; This watt hour meter makes managing your energy consumption easy
- 90-250 V Wide Voltage Range: The amp draw meter measures 90-250 Vac, 0-16 AMP, and 0-3680 Watt, with overload indication adjustable from 680 to 3680 W; Adhering to Class 1.0 accuracy standard with 0.1 W, 0.1 V, 0.001 A, and 0.001 kWh resolution, this watt power meter ensures precise readings
- Clear LCD Display with Backlight: The energy monitor plug features a wide-angle, clear-digit LCD display with backlight for easy reading and operation in dark environments; This wattage meter plug in provides excellent visibility
- 90 Days Long-Term Data Hold Memory: Equipped with a built-in rechargeable battery backup, this appliance power usage meter stores data for up to 90 days during power outages or when unplugged; The reset button restores all data to zero, making it a reliable wattage meter for long-term use
- Space-Saving Design: The compact design of this measure power usage device leaves the lower wall outlet accessible when plugged into the upper outlet; Made of high-quality fire-resistant material, this watt meter plug in is both safe and efficient; Ideal for those looking for a power meter plug, watt meter, or outlet meter
Or let it run in the cloud
If the goal is to keep a prerecorded video live on YouTube, StreamNeo runs the loop from the cloud, so your home PC and connection do not need to stay on. Upload a recording or build a playlist, add your YouTube stream key, and go live. It supports the uploaded quality up to 4K 60fps at one flat price per slot, automatically recovers if YouTube drops the stream, and offers the first day free with no card. Monthly billing is $9.99 per month. See StreamNeo or StreamNeo pricing. Start your free first day with StreamNeo.
Quick Recap
Best Value
- ✓ Backlit LCD Display: The watt meter features an upgraded backlit LCD display with a 160° wide viewing angle, providing clear and distinct data readings from any angle, day or night. (Note: To conserve energy, the backlight will automatically turn off after 15 seconds of continuous use.)
- ✓ 9 Types of Data Display: This energy meter plug accurately monitors a wide range of electrical parameters, including power (W), apparent power (VA), energy consumption (kWh), usage time (hours), power frequency (Hz), power factor (PF), voltage (V), current (A), and electricity cost. The user-friendly interface allows you to easily read and navigate through 9 types of data with a single button.
- ✓ Save Money and Energy: By toggling through the 9 display modes, you can gain insights into various operational parameters of your devices. The home energy monitor also calculates and displays the electricity consumption and cost over time, helping you save on your electricity bills by monitoring and managing energy usage.
- ✓ Data Storage: The plug-in electricity meter stores all non-real-time data, ensuring no information is lost in the event of a sudden power outage. If data exceeds the screen’s maximum display range, the screen will flash as a reminder. Pressing and holding the reset button for 3 seconds will reset the cumulative data to zero.
- ✓ Safe to Use: Rated voltage 125VAC, 60Hz, 15A maximum 1875W resistor and tungsten wire, 1/2HP. Clean and tidy interface, very simple to use.
Rank #4
- Choose from the Kill-a-Watt's four settings to monitor your electrical usage
- Monitor your electrical usage by day, week, month, or year
- Features easy-to-read screen
- Electricity usage monitor connects to appliances and assesses efficiency
- Large LCD display counts consumption by the kilowatt-hour
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
