Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Fix the driver behind crashes, sound loss and screen glitches3Clear out junk files and repair common Windows errorsThere is no single reliable monthly price for running an EC2 instance 24/7 as a YouTube Live encoder or relay in India. The total depends on the AWS Region, instance and operating system, whether EC2 encodes or only relays video, stream bitrate and runtime, and any storage, monitoring, or networking add-ons. Use the AWS Pricing Calculator with those inputs; do not treat compute alone as the full cost.
What makes up the monthly EC2 streaming bill?
For a continuously running setup, estimate compute and internet data transfer separately, then add only the other services your design actually uses. AWS EC2 pricing describes On-Demand charges by instance usage, from launch until the instance is stopped or terminated; billing rules vary by operating system, and listed systems may bill per second. Use the calculator’s time assumptions for a 24/7 month rather than assuming every month has the same number of hours.
- Compute: the selected instance type and size, operating system, Region, runtime, and purchase option.
- Outbound transfer: data sent from EC2 to YouTube’s ingest servers. This is a separate cost dimension from instance runtime.
- Architecture-dependent extras: EBS storage, monitoring, Elastic IP or other network items, and any additional AWS services. The AWS Pricing Calculator can include data transfer and Elastic IP inputs.
AWS’s pricing pages describe a 100 GB monthly free data-transfer allowance aggregated across eligible AWS services and Regions, subject to stated exceptions and account terms. Confirm that the allowance applies to your account and current billing period before subtracting it from an estimate. AWS prices may exclude applicable taxes and duties.
Estimate your own India-region cost
Use the Region where you intend to run the workload, not a rate copied from another geography. The available pricing information does not establish an exact hourly rate for a particular India-region instance, so a defensible INR total requires a calculator estimate using your chosen configuration and a recorded estimate date.
Recommended Free Tools
#1 Best Overall
- Compact but Powerful Design: ZowieBox is smaller than a phone, featuring a tally light and LCD screen for streaming status. Capture console gameplay in up to 4K with zero-lag HDMI passthrough, while the built-in video encoder converts video for IP streaming. The IP stream can also be decoded back to a 4K HDMI signal.
- Standalone Game Streaming: Just plug and play—ZowieBox enables PC-free live gaming without affecting gameplay. As an RTMP hardware encoder and HDMI streamer, it delivers stable streaming directly from your source, making it ideal for gaming, live events, and professional broadcasting.
- NDI|HX3 Converter Technology: ZowieBox converts HDMI signals to NDI|HX3/HX2/HX, functioning as an NDI video encoder, or NDI Video Decoder for flexible IP workflows. Certified NDI technology enables low-latency gameplay streaming through OBS/vMix. Note: Encoder and decoder modes cannot run simultaneously; full NDI signals are not supported.
- UVC to HDMI Conversion: Supporting up to 4K@30fps and 1080p@60fps decoding, ZowieBox enables flexible conversion for webcam and video workflows. As a video decoder and HDMI to IP converter, it expands connectivity options for professional video devices. Note: USB capture card functionality is not currently supported.
- All-around Configuration Options: Control ZowieBox through its web UI on a PC, phone, or tablet. Manage connected PTZ cameras, tally light, video/audio, OSD, work mode, streams, network, and system settings. Support for VISCA over IP encoder workflows enables flexible PTZ control, while the dashboard provides video preview and system status.
- Define the workload. Decide whether EC2 will encode video, relay an already-encoded feed, or send both a primary and backup feed. Encoding can require different compute capacity from relaying.
- Choose the AWS Region and instance. Select the actual Region and instance family/size in the AWS Pricing Calculator. Set the operating system, runtime and On-Demand, Savings Plans or Spot purchase option that matches your plan.
- Set the stream format before estimating transfer. Choose codec, resolution, frame rate and bitrate. YouTube publishes different recommended ingest bitrates for H.264, H.265 and AV1. For example, its H.264 guidance recommends 5 Mbps for 1080p at 30 fps and 17 Mbps for 1080p at 60 fps.
- Calculate monthly outbound volume. Multiply bitrate in bits per second by the number of streaming seconds, then convert bits to bytes and bytes to GB. Add overhead and reflect actual streaming hours. If primary and backup feeds are both sent, include both feeds’ combined bitrate.
- Add network and service items. Enter outbound transfer and any applicable Elastic IP, storage, monitoring or other services actually used. Avoid adding services your architecture does not need.
- Record the result carefully. State the currency, Region, estimate date, instance and OS, runtime, purchase option, bitrate and transfer-volume method, taxes, free-transfer assumptions, and exclusions alongside any total you publish.
Savings Plans involve a commitment; Spot capacity can be interrupted. Neither should be described as a guaranteed always-on price without accounting for those trade-offs.
How YouTube settings affect EC2 data transfer
The traffic billed as EC2 internet egress is the stream sent from EC2 to YouTube, not the video delivered from YouTube to each viewer. YouTube says it transcodes the incoming feed into multiple output formats, so viewer playback is not a reason to multiply EC2 egress by audience size.
Rank #2
- 【Innovative Product with Leading Technology】- Equipped with an advanced H.265 /H.264 dual encoding chip, supports 4K UHD (3840x2160) video input and output, with a maximum frame rate of 30fps at 4K resolution and up to 120fps at 2K and lower resolutions, delivering a smooth and detailed visual experience. It also supports HDCP 1.4 decryption, easily decoding various HDMI ultra HD video sources, delivering a cinematic visual experience for both professional live streaming and 4K ultra HD content transmission.
- 【Multi-protocol and Multi-platform Compatibility】- Fully compatible with streaming protocols such as HTTP, RTSP, RTMP(S), SRT, HLS(M3U8), MP4, Multicast(UDP, RTP, PTL), FLV, WebRTC, TRTC, ICECAST, it can simultaneously output 4 video streams with different protocols and push them to live streaming platforms such as YouTube, Facebook, Twitch, and Vimeo with one click. Simultaneous live streaming across multiple platforms can be achieved without additional equipment.
- 【Highly Customizable Settings to Meet Individual Needs】- It supports adding static text, scrolling captions, brand logos, and timestamps. Users can freely adjust core parameters such as video resolution, frame rate, and bitrate, and also perform personalized editing functions such as video cropping, rotation, flipping, and mirroring. It supports dual input of HDMI embedded audio and line-in audio, with adjustable sound quality, making your live stream content more distinctive and allowing you to create a unique brand live stream style.
- 【Stable and Efficient Transmission, Easy Operation】- Employing HDMI to Ethernet core connection technology, it ensures stable and reliable network transmission with low latency and no lag, adapting to various network environments. Equipped with an intuitive user interface and detailed instruction manual, no professional technical background is required; setup can be completed quickly after connecting the device. It is also compatible with multiple terminals such as computers and mobile phones for management, and the video stream status can be viewed in real time via a URL.
- 【Lifetime Free Warranty and Technical Supports】- All URayCoder video codecs come with a lifetime free warranty and technical supports, supporting secondary development and feature customization to meet enterprise-level personalized needs. Meanwhile, we providing many kinds of customization services such as shell pattern printing, logo addition, hardware and function development, ensuring reliable quality and worry-free after-sales service.
| Example ingest format | YouTube H.264 recommended bitrate | Approximate traffic if streamed continuously for 30 days |
|---|---|---|
| 1080p, 30 fps | 5 Mbps | About 1,620 GB (decimal), before protocol overhead |
| 1080p, 60 fps | 17 Mbps | About 5,508 GB (decimal), before protocol overhead |
These are workload calculations, not AWS quotes. They assume 30 days of uninterrupted streaming at the stated bitrate; a real month’s hours, stream overhead and any backup feed will change the volume. The bitrate recommendations are YouTube’s published guidance, not a guarantee that a particular instance can encode or relay reliably.
Encoder and network settings to budget for
- Protocol: YouTube recommends RTMPS.
- Bitrate mode: YouTube recommends constant bitrate (CBR).
- Keyframes: use a two-second interval; YouTube says not to exceed four seconds.
- Bandwidth headroom: the outbound connection capacity should exceed the total stream bitrate. YouTube recommends leaving 20% extra space. Include the combined rate if sending primary and backup feeds.
- Preflight: test the stream before going live and verify that the ingest status and playback are stable.
Why a precise figure cannot be stated here
A monthly price would be misleading without a fixed instance, Region, operating system, stream workload and billing option. Data transfer also changes with bitrate, uptime and backup configuration, while taxes and add-ons depend on the account and architecture. A useful estimate is therefore the calculator output for an explicitly documented scenario, not a generic figure labelled “India.”
Free tools Windows power users keep installed
One-click scans. No signup required.
Rank #3
- 【Hardware H.265/H.264 Encoding at 1080P60】Dedicated hardware encoder delivers broadcast-quality 1080P60 streams with H.265/H.264 compression. Reduces bandwidth usage by up to 50% compared to legacy H.264-only solutions, while maintaining crisp, crystal-clear video output.
- 【Broad Protocol Support for IP Distribution】 Supports SRT, RTMP(S), RTSP, UDP, HTTP, HLS, WebRTC, TRTC, Icecast and SHOUTcast — integrate seamlessly with CDNs, surveillance NVRs, IPTV systems and browser-based monitoring dashboards. One device replaces multiple single-purpose streaming boxes.
- 【Browser-Based Setup in Minutes】 Set up in minutes through any browser — no software, drivers or OS compatibility issues. DHCP is enabled by default to prevent IP address conflicts on your network. Note: basic networking knowledge (IP address, RTSP/RTMP configuration) is recommended for advanced streaming setups.
- 【Compact Design with Flexible Deployment】Palm-sized form factor (approx. 90×54×29mm) fits easily behind monitors, on shelves, or in equipment racks. Low power consumption ensures reliable 24/7 operation for live events, remote monitoring, and digital signage.
- 【Professional Audio & OSD Overlay + 1-Year Warranty】 Supports HDMI embedded audio plus external 3.5mm input. Built-in OSD generator adds scrolling text, logos, or timestamps directly to the video stream — ideal for branding, event info, or security labeling. Backed by a 1-year warranty and 24/7 online technical support.
Or let it run in the cloud
For a prerecorded YouTube stream, StreamNeo replaces the always-on home computer or EC2 workflow: upload a recording or build a playlist, add your YouTube stream key once, and go live. StreamNeo loops the uploaded videos from the cloud; it does not stream from a camera or to platforms other than YouTube.
- Nothing has to stay powered on at home.
- Any quality up to 4K 60fps streams as uploaded at one flat price per slot, without re-encoding or quality tiers.
- Automatic recovery is included if YouTube drops the stream.
- The first day is free with no card required; one free day per account.
StreamNeo’s monthly price is $9.99 per month. A slot includes one always-on stream, 10 GB storage per slot pooled across active slots, looping and playlists, and StreamNeo team support. UPI and cards are accepted in India; card checkout is available worldwide. See StreamNeo for service details, then start the free first day.
Quick Recap
Best Value
- ⭐【Innovative Product with Leading Technology】- Equipped with an advanced H.265 /H.264 dual encoding chip, supports 4K UHD (3840x2160) video input and output, with a maximum frame rate of 30fps at 4K resolution and up to 120fps at 2K and lower resolutions, delivering a smooth and detailed visual experience. It also supports HDCP 1.4 decryption, easily decoding various HDMI ultra HD video sources, delivering a cinematic visual experience for both professional live streaming and 4K ultra HD content transmission.
- ⭐【Multi-protocol and Multi-platform Compatibility】- Fully compatible with streaming protocols such as HTTP, RTSP, RTMP(S), SRT, HLS(M3U8), MP4, Multicast(UDP, RTP, PTL), ONVIF, FLV, WebRTC, TRTC, ICECAST, it can simultaneously output 4 video streams with different protocols and push them to live streaming platforms such as YouTube, Facebook, Twitch, and Vimeo with one click. Simultaneous live streaming across multiple platforms can be achieved without additional equipment.
- ⭐【Highly Customizable Settings to Meet Individual Needs】- It supports adding static text, scrolling captions, brand logos, and timestamps. Users can freely adjust core parameters such as video resolution, frame rate, and bitrate, and also perform personalized editing functions such as video cropping, rotation, flipping, and mirroring. It supports dual input of HDMI embedded audio and line-in audio, with adjustable sound quality, making your live stream content more distinctive and allowing you to create a unique brand live stream style.
- ⭐【Stable and Efficient Transmission, Easy Operation】- Employing HDMI to Ethernet core connection technology, it ensures stable and reliable network transmission with low latency and no lag, adapting to various network environments. Equipped with an intuitive user interface and detailed instruction manual, no professional technical background is required; setup can be completed quickly after connecting the device. It is also compatible with multiple terminals such as computers and mobile phones for management, and the video stream status can be viewed in real time via a URL.
- ⭐【Lifetime Free Warranty and Technical Supports】- All URayCoder video codecs come with a lifetime free warranty and technical supports, supporting secondary development and feature customization to meet enterprise-level personalized needs. Meanwhile, we providing many kinds of customization services such as shell pattern printing, logo addition, hardware and function development, ensuring reliable quality and worry-free after-sales service.
Rank #4
- 4K & HD STREAMING IN H.264 AND H.265 – Self-contained processor supporting H.264 and H.265 encoding in HD or Ultra HD (up to 2160p60) via SRT or RTMP, streaming directly to YouTube, Facebook, X, Twitch, Zoom, Microsoft Teams, OBS, Wowza, and many more — no encoding PC needed.
- 12G-SDI INPUT WITH STANDARDS CONVERSION – Supports input resolutions up to DCI 4K60 with an SDI input and SDI loop output, plus Teranex-powered automatic standards conversion so any HD or Ultra HD source streams cleanly at any target resolution.
- DUAL MONITOR OUTPUTS – Features both SDI and HDMI monitor outputs with a user-configurable standards converter on both the 12G-SDI Out and 4K HDMI Out, so you can feed a confidence monitor or downstream device at any required format independent of your streaming standard.
- ETHERNET + 5G/4G MOBILE WITH AUTO-FAILOVER – Connect via Gigabit Ethernet (10/100/1000BASE-T) or tether a smartphone via USB-C for mobile data, with automatic switchover between connections — ensuring your stream stays on air even if the primary internet connection drops.
- CLOSED CAPTIONS, TIMECODE & REST API – Supports embedding CEA-608 and CEA-708 closed captions in live RTMP streams, source timecode over RTMP and SRT, and offers a REST API over Ethernet for external HTTP control — ideal for broadcast automation and accessibility-compliant workflows.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
