What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
To connect the Joy-IT PS2 wireless receiver documented in its 2018 manual, wire its power pin to 3.3 V, ground to ground, and its four communication pins to Arduino pins 10–13. Then install PS2X_lib and start with its PS2X_Example sketch, adjusting the sketch’s pin assignments to match your wiring. Receiver pinouts differ, so verify the exact model before connecting anything.
Wire the documented Joy-IT receiver
The Joy-IT manual maps the receiver’s numbered pins to an Arduino as follows. These pin numbers refer to the receiver connector, not wire colors; the manual warns that colors may vary.
| Receiver pin | Signal | Arduino connection |
|---|---|---|
| 5 | Power | 3.3 V |
| 4 | GND | GND |
| 6 | Attention | Digital pin 10 |
| 2 | Command | Digital pin 11 |
| 1 | Data | Digital pin 12 |
| 7 | Clock | Digital pin 13 |
The Joy-IT manual specifically cautions: “Attention! The cable colours may differ!” Identify the pin positions and confirm the functions against the manual for your receiver instead of matching colors by assumption.
Check voltage and signal requirements first
Do not assume a receiver intended for controller-level signals can be powered from a 5 V Arduino output. PsxNewLib’s hardware documentation describes controller power as 3.6 V, recommends 3.3 V as a practical safer supply, and cautions against treating 5 V as safe. Follow the exact receiver manufacturer’s instructions if they differ.
#1 Best Overall
- 【Compatible with PS2/PS2 Slim/PS1】: Our wireless ps2 controller is compatible with PS2/PS2 Slim/PS1, suitable for playing various ps2/ps1 games, spending leisure time accompany friends and family by playing games together
- 【2.4GHz Wireless Connection】: We provide a 2.4GHz wireless receiver for this ps2 controller, only need to insert the wireless receiver into the ps2 console and wait to connect with the wireless ps2 controller, easy to operate and convenient to use
- 【High Stable Signal】: Our wireless ps2 controller resolves the issue of disconnection and will have stable signal once the ps2 controller has been connected successfully, don't worry the signal interruption any more.
- 【Comfortable for Palm Structure】：Our wireless controller for PS2 is designed for human beings palms, when the wireless controller is handheld by your hands, you don't feel fatigue even if you have played games for a long time, giving you a comfortable gaming experience
- 【Dual Vibration Motors】: Our PS2 controller wireless is installed with dual vibration motors, every motions and each race match shaking touch feeling, giving you more realistic and more immersive gaming feel
When the Arduino uses 5 V
PsxNewLib recommends signal-level adjustment when connecting a 5 V Arduino. Its documentation also notes that common bidirectional level-shifter boards can have 10 kΩ pull-ups, which may be too weak for some controllers; it suggests changing them to 1 kΩ or adding a 1 kΩ resistor in parallel. Whether that adjustment applies depends on the hardware and library used.
When the Arduino uses 3.3 V
PsxNewLib says level shifting is unnecessary with a 3.3 V Arduino, but pull-ups are still needed because the board’s internal pull-ups may be too weak. The AVR-specific PS2Controller_AVR documentation calls for a 1–10 kΩ pull-up on DATA and prefers 1 kΩ for stronger signal integrity at higher clock speeds. Treat this as library-specific guidance and follow the requirements for your own receiver and library.
Rank #2
- NOTE: THIS ITEM IS A THIRD PARTY PRODUCT. It is Burcica brand product
- Ergonomic Design Controller: The most classic shape P2 controller perfectly fit palms, all the buttons and controls make your hand very comfortable for long periods of gameplay. It must be a big surprise when your kids or your friends receive these beautiful controllers.
- Double Shock Remote: Our Wireless controller for P2 built in two electric motors makes each hit, crash and explosion is more excite and realistic, you will feel the rumble in the palm of your hand
- 8 Action buttons with pressure sensitivity w/ Twin analogue sticks and directional thumb-pad,2.4g Wireless Receiver Included ; Requires 2 batteries (not included),Optimized performance for every game,botton pattern random
- EXCELLENT SERVICE - If you have any questions, please do not hesitate to contact us. Please believe that we will put the customer experience first. We will provide you with the best solution.
Install a library and test the connection
- Install PS2X_lib, which the Joy-IT manual recommends for its receiver.
- Open the library’s PS2X_Example sketch and check the controller-pin assignments against the wiring table. Edit the sketch if your connections use different Arduino pins.
- Upload the example and use its button and joystick communication as the initial test, as described by the Joy-IT manual.
If you choose another library, verify its board support and connection mode. PsxNewLib documents hardware-SPI and bit-banged modes, and describes timing and compatibility differences, including acknowledgement-pulse handling. PS2Controller_AVR targets AVR boards and documents digital buttons, stick axes, optional pressure values for genuine DualShock 2 hardware, optional vibration, and adaptive polling. Those are repository-described features, not guarantees that every wireless receiver or clone will work.
Troubleshoot detection and input problems
- No response: Recheck the connector pin positions and the receiver’s pinout, then confirm that the sketch assignments match the actual Arduino connections.
- Unreliable communication: Check the supply and signal voltage, and investigate whether the required pull-ups are present and sufficiently strong. Open-collector lines need appropriate pull-ups; PsxNewLib identifies Data and Acknowledge as open-collector signals.
- Works with one controller but not another: Timing and compatibility can differ between controllers, especially wireless models and clones. Library documentation cannot guarantee support for every receiver.
Choose the library for your board and controller
For the Joy-IT receiver covered by the wiring table, the most direct documented starting point is the vendor-recommended PS2X_lib example. If considering alternatives, compare the exact board architecture supported, whether the library uses hardware SPI or bit-banging, its voltage and pull-up guidance, and the features you need. A library that supports analog sticks, pressure readings, vibration, or slower polling may still not support a particular wireless clone.
Quick Recap
Best Value
- Play your PS1 or PS2 wirelessly.
- System compatibility: PS1, PS2, and Windows 10/11.
- Controller compatibility: Xbox One, Series, and Elite controllers. PS4/PS5 controllers. Wii U Pro and Switch Pro controllers.
- 8BitDo controller compatibility: partial 8BitDo Bluetooth Controllers and arcade stick (Not for Xbox Edititon).
- Virtually lag-free
Rank #4
- 8 action buttons with pressure sensitivity. Two analogue sticks and a straight thumb pad
- Perfectly compatible with PS-1 / PS-2 / PC/win7-10
- Controller wireless receiver included. Requires 2 x AAA batteries (not included)
- Dual vibration motors let you feel every hit, crash and explosion in games that support vibration feedback for a more realistic and immersive experience
- A familiar control layout that doesn't require a learning curve to be able to use, with all the same buttons as on game console controllers
Rank #3
- 【About Degulan Controller】It's A THIRD PARTY PRODUCT, this controller perfectly compatible with your Play 2.
- 【Plug and Play】Upgraded joysticks, 360-degree positioning with ultra-accuracy, Plug and Play without needing extra software or adapter.
- 【Double Shock Enhanced Experience】P-2 double shock controller provides better vibration, has more realistic gaming experience, Ergonomic design, comfortable feel, fully enjoy the fun of game.
- 【Comfortable Control】Wireless controller for P-2 more convenient to play-s games.wireless controller for Play 2 with sensitive control and giving you an excellent gaming experience.
- 【High Stable Signal】Degulan wireless controller compatible with Play 2 use sensitive core, connection between controller is no signal input delay.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
