The InWin PRISM is a mid-tower PC case built around a three-piece panoramic tempered-glass design with a two-way mirror effect. Its published specifications list support for ATX, Micro-ATX, and Mini-ITX motherboards, graphics cards up to 435 mm, four included fans, and radiator mounts up to 360 mm. Those figures describe compatibility—not measured cooling performance—and the included fan variant can depend on the regional SKU.
What makes the InWin PRISM distinctive?
InWin’s defining feature is a three-piece spliced tempered-glass panel intended to create a frameless panoramic view of the interior. The company describes the glass as having a two-way mirror effect: components appear concealed when internal lighting is off and become visible when it is on. The result will depend on the room, lighting, and build; it is a manufacturer-described visual effect, not a guaranteed appearance in every setup.
The chassis uses SPCC steel and tempered glass. In its April 1, 2025 launch announcement, InWin described the panel as a “seamless, three-piece spliced glass panel” offering a panoramic view. The PRISM is a mid-tower ATX chassis, though it also supports smaller motherboard formats.
Will your components fit?
InWin’s product page gives the following fit limits. Check the dimensions and placement of your actual components—including any radiator, fan, or cable arrangement—rather than relying on a single maximum figure.
Free tools Windows power users keep installed
One-click scans. No signup required.
#1 Best Overall
- Dual-Perspective: Transparent & Mirror: Light Reveals All Through Two-Way Mirror Panels
- Ultra-Wide Panoramic View: Geometric Glass Provides a Panoramic 180° View
- Dynamic Cooling Solutions: Accommodates Up to 11 Fans and 240/280/360 mm Radiators
- Convenience: Rear Wing-Inspired Handle for Easy Portability
- Excellent thermal design: Large Mesh Filters Enhance Cooling and Airflow
| Component or feature | Published support |
|---|---|
| Motherboards | ATX, Micro-ATX, Mini-ITX; back-connector ATX and Micro-ATX are also listed |
| Graphics card | Up to 435 mm long |
| CPU air cooler | Up to 175 mm tall |
| Power supply | ATX12V / PSII format; up to 238 mm long |
| Expansion slots | Seven PCIe slots; vertical GPU placement requires an optional riser card, not included |
| Storage | Two 3.5-inch bays and two 2.5-inch bays; the product page lists a maximum 2.5-inch SSD height of 7 mm |
| Case dimensions | 530 × 275 × 500 mm (20.9 × 10.8 × 19.7 inches) |
| Net weight | 10.01 kg (22.2 lb) |
These are manufacturer-listed specifications, not a guarantee that every combination of parts will fit without interference. InWin cautions that specifications may vary by region, and its official materials differ in some details. Confirm the exact model suffix and regional listing before purchasing.
What cooling hardware does it support?
The product page lists fan mounts at four locations. Its radiator list includes multiple options, with the largest listed size being 360 mm. Mounting support alone does not establish the temperatures or noise level you will get in a completed PC.
Rank #2
- Dual-Perspective: Transparent & Mirror: Light Reveals All Through Two-Way Mirror Panels
- Ultra-Wide Panoramic View: Geometric Glass Provides a Panoramic 180° View
- Dynamic Cooling Solutions: Accommodates Up to 11 Fans and 240/280/360 mm Radiators
- Convenience: Rear Wing-Inspired Handle for Easy Portability
- Excellent thermal design: Large Mesh Filters Enhance Cooling and Airflow
| Location | Fan support listed by InWin | Radiator support listed by InWin |
|---|---|---|
| Front | Three 120 mm or three 140 mm | 240 mm or 360 mm |
| Top | Three 120 mm or two 140 mm | 240 mm, 280 mm, or 360 mm |
| Rear | One 120 mm | 120 mm |
| Side | Three 120 mm | 240 mm or 360 mm |
InWin also identifies removable dust filters and an ARGB hub that supports up to six ARGB components. The company says the filters are designed for toolless removal. Its launch announcement refers to ten fan placements, while the product page’s location-by-location mounting list should be used when planning a specific fan configuration.
Does the PRISM come with fans?
Yes. The product page lists four preinstalled InWin VX120 fans. The launch announcement describes four VORTEX PWM ARGB fans, and the manual names VX120/VX120P variants. Because official materials use different labels and InWin notes regional specification differences, check the exact SKU to confirm which fan model is in the box.
Do these 3 things before closing this tab:
1Clear out junk files and repair common Windows errors2Fix the driver behind crashes, sound loss and screen glitches3Repair Windows errors before they cause bigger problemsRank #3
- Performance gaming cube style micro-ATX with dual tempered glass panel for eye-catching visibility of your gaming setup. Plenty of room on the back side to hide and route cables. Matching paint colors from both the exterior/interior of the case. Ventilated metal side panel for increased air circulation
- 5x 120mm ARGB fans pre-installed in case, comes with 3pin ARGB connector on RGB fans for ARGB motherboard sync (Only compatible with ARGB motherboards). RGB fans has 366 RGB lighting modes via RGB light switch button on top of case (Press down on LED button for 5 seconds to switch to motherboard ARGB sync mode).
- Can fit graphics cards up to 340mm in length and CPU coolers up to 155mm in height. Top panel comes with 1 x USB 3.0, 2 x USB 2.0, Power button, LED switch button, HDD / Power LED indicators, & HD Audio jacks. Water cooling options: 240mm
- Screw in PCI-E Covers (Non-punch out PCI-E Slots) for hassle free GPU installation. Room for up to 2 x 3.5" hard drives or 1x 3.5" hard drive + 1x 2.5" hard drive
What ports and controls are listed?
The product page lists one USB 3.2 Gen 2×2 Type-C port, two USB 3.2 Gen 1 ports, a CTIA-compatible HD audio combo jack, and an LED lighting control switch. It also identifies a modular dual PCIe slot bracket. The official store listing includes a power button in its I/O description, while the product page’s list does not; check the listing for your region if the exact front-panel controls matter.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Is the InWin PRISM worth considering?
The PRISM’s strongest reason to choose it is its distinctive panoramic mirror-glass presentation. Its published component clearances and support for several fan and radiator positions make it practical to plan a range of builds, but those specifications do not prove superior thermals, lower noise, or easier assembly. No independent measurements are established in the cited manufacturer materials, so treat performance as something to assess from reviews of the exact configuration rather than infer from mount counts.
Rank #4
- Panoramic curved glass design for a stunning immersive view
- Dual-chamber design separates PSU and GPU space for near cable routing and stable airflow
- Modular interior built for universal compatibility
- Supports up to 10 fans for superior cooling performance
For a useful buying check, compare your parts against the listed GPU, cooler, and PSU limits; verify the fan variant and regional SKU; and budget separately for a compatible riser if you want a vertical GPU. The product page and manual are the best references for configuration details, while the official store listing is where to recheck current price and stock.
Sources: InWin PRISM product page; InWin launch announcement, April 1, 2025; InWin PRISM user manual; InWinStore listing.
The Tool Desk
Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Quick Recap
Best Value
- Closed-front design balancing cooling capability with a clean, refined exterior finish
- Minimalist expression with subtle curvature and fine-patterned aluminum side intake vents
- Includes three pre-installed LCP-blade Momentum fans for quiet, reliable performance
- Space for graphics cards up to 368 mm in length and includes an adjustable support bracket
- Compatible with front-mounted radiators up to 360 mm and top-mounted up to 280 mm
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
