Free tools Windows power users keep installed
One-click scans. No signup required.
iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
To loop a Hindi news bulletin on YouTube Live, add the recording to an OBS scene as a Media Source, enable Loop, connect OBS to an encoder stream in YouTube Studio with that stream’s URL and key, then test the preview before starting the broadcast. First confirm you have permission to stream and archive every part of the bulletin.
Before you start: check rights and channel eligibility
Confirm permission for the whole bulletin
Check that you have the rights needed to rebroadcast the bulletin’s video, audio, music, clips and graphics, and to keep an archived copy if YouTube retains one. YouTube says all live streams are scanned for matches to third-party content. A detected match can lead to a warning, replacement of the picture, interruption or termination of the broadcast. A license alone may not prevent an interruption: the rights owner may also need to allowlist your channel through Content ID. See YouTube’s guidance on copyright issues with live streams and its livestream terms and conditions. This does not determine whether a particular bulletin or license is cleared in your territory.
Check that your channel can go live
YouTube’s getting-started guidance requires a verified channel without live-streaming restrictions in the preceding 90 days. First-time activation can take up to 24 hours, so check eligibility and activate live streaming on the channel before planning the broadcast. Requirements can change; confirm the current status in YouTube Studio and YouTube’s live-streaming eligibility guidance.
The Tool Desk
Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Prepare the recording
Keep the source file accessible on the computer running OBS. OBS Media Source documentation lists common formats including MP4, MOV, MKV, AVI, FLV, TS and WebM; the installed OBS version and system can affect what plays successfully. If the file is on removable storage, make sure that drive stays connected for the entire broadcast.
#1 Best Overall
- Pro performance with great pre-amps - Achieve a brighter recording thanks to the high performing mic pre-amps of the Scarlett 3rd Gen. A switchable Air mode will add extra clarity to your acoustic instruments when recording with your Solo 3rd Gen
- Get the perfect guitar and vocal take with - With two high-headroom instrument inputs to plug in your guitar or bass so that they shine through. Capture your voice and instruments without any unwanted clipping or distortion thanks to our Gain Halos
- Studio quality recording for your music & podcasts - Achieve pro sounding recordings with Scarlett 3rd Gen’s high-performance converters enabling you to record and mix at up to 24-bit/192kHz. Your recordings will retain all of their sonic qualities
- Low-noise for crystal clear listening - 2 low-noise balanced outputs provide clean audio playback with 3rd Gen. Hear all the nuances of your tracks or music from Spotify, Apple & Amazon Music. Plug-in headphones for private listening in high-fidelity
- Everything in the box: Includes Pro Tools Intro+, Ableton Live Lite, Cubase LE, and Hitmaker Expansion: a suite of essential effects, powerful software instruments, and easy-to-use mastering tools
Set up the bulletin loop in OBS
- Create a scene: In OBS, add or select a scene for the bulletin. In the Sources panel, choose + → Media Source. The exact labels or layout can vary by OBS version and operating system.
- Select the recording: In the Media Source properties, choose the local video file. Enable Loop, then apply the properties. OBS describes this option as making the file play again after playback has completed. See the OBS Media Sources documentation.
- Check the preview and audio: Confirm the picture appears in the OBS preview and the audio meter responds as expected. Let the recording reach its end and verify that playback returns to the beginning. These checks help catch a bad file path, unsupported playback or an unexpected end-of-file stop before viewers see it.
- Set the output format: Choose a resolution, frame rate and encoder configuration suitable for the source and your connection. Use YouTube’s current encoder settings, bitrate and resolution recommendations rather than guessing a bitrate; the appropriate values depend on the selected output. OBS and YouTube labels may differ by version.
Connect OBS to YouTube Live
- Open Live Control Room: In YouTube Studio, select Create → Go Live. Create an encoder stream or select an existing one. YouTube’s encoder setup guide explains the current workflow.
- Copy the stream URL and key: In the stream settings, copy the server/stream URL and stream key into OBS’s stream settings. YouTube uses these to route the encoder feed to your event. Treat the key like a password: do not include it in a screenshot, tutorial or public post. Consult YouTube’s live stream settings guidance for the current controls.
- Choose visibility and event details: Set the title, description, audience and visibility deliberately in YouTube Studio. Use an unlisted test if you need to check access without making the broadcast public; confirm the intended audience can open the stream before the real bulletin.
- Start the encoder and inspect YouTube’s preview: Start streaming from OBS and wait for the feed to appear in Live Control Room. Check the picture, sound and stream-health notices. A successful OBS connection does not by itself prove that the viewer-facing stream is healthy.
- Go live only after the check: When the preview and stream health are acceptable, start the YouTube broadcast. Monitor OBS playback and YouTube’s health indicators while the bulletin loops.
Monitor the live loop and end the broadcast cleanly
During the event, watch for a stopped or frozen Media Source, missing audio, OBS disconnection, YouTube stream-health warnings and copyright notices. YouTube says streams under 12 hours are automatically archived; plan for the recording’s rights and retention accordingly. When finished, stop the encoder in OBS and end the live stream in YouTube Studio as appropriate. YouTube’s live streaming tips and encoder guidance cover testing and monitoring.
Troubleshooting
- The recording does not appear in OBS: Reopen the Media Source properties and confirm the selected file path still exists and the drive is mounted. Try a format supported by the installed OBS setup if the file will not play.
- The video plays once and stops: Open that source’s properties and verify Loop is enabled. Test through the end of the file again before connecting to YouTube.
- The preview has picture but no sound: Check the OBS audio meter while the file plays and confirm the source is not muted. If there is no meter activity, verify the file’s audio track and playback settings before going live.
- YouTube receives no feed: Check that OBS is using the correct stream URL and key for the selected YouTube encoder event, and that the encoder has been started. If the key may have been exposed, replace it in YouTube and update OBS.
- The stream connects but YouTube reports poor health: Check YouTube’s stream-health messages and compare OBS’s output configuration with YouTube’s current encoder recommendations. Adjust resolution, frame rate or bitrate to a configuration your connection can sustain.
- The live feed is interrupted after a copyright match: Review YouTube’s notice and resolve the rights issue with the relevant owner. Do not assume a license prevents Content ID interruption; ask the owner about allowlisting the channel where applicable.
Or let it run in the cloud
If your goal is a continuing YouTube channel rather than a one-time OBS session, StreamNeo plays uploaded videos from the cloud: upload the bulletin, add your YouTube stream key, then go live. Nothing has to stay on at home, and the stream can recover automatically if YouTube drops it. Any uploaded quality up to 4K 60fps streams as made at one price per slot, with the first day free and no card required. The monthly option is $9.99 per month. Confirm your rights for both the live stream and any archive before uploading. Start the free first day.
Rank #2
- The new generation of the songwriter's interface: Plug in your mic and guitar and let Scarlett Solo 4th Gen bring big studio sound to wherever you make music
- Studio-quality sound: With a huge 120dB dynamic range, the newest generation of Scarlett uses the same converters as Focusrite’s flagship interfaces, found in the world's biggest studios
- Find your signature sound: Scarlett 4th Gen's improved Air mode lifts vocals and guitars to the front of the mix, adding musical presence and rich harmonic drive to your recordings
- All you need to record, mix and master your music: Includes industry-leading recording software and a full collection of record-making plugins
- Everything in the box: Includes Pro Tools Intro+, Ableton Live Lite, Cubase LE, and Hitmaker Expansion: a suite of essential effects, powerful software instruments, and easy-to-use mastering tools
Frequently Asked Questions
Can I loop more than one bulletin or video in OBS?
Yes. Add and arrange multiple Media Sources in a scene or build a playlist workflow, then test the sequence and transitions before broadcasting.
Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallCan I use an OBS test stream without making it public?
Set the YouTube event to unlisted for the test and check that the intended viewers can access it. Change visibility deliberately for the actual broadcast.
Rank #3
- PLUG IN AND HEAR SOUND IN SECONDS - USB Type-A connector with a 3.5mm stereo headphone output and a separate 3.5mm mono microphone input. No drivers, no software, no external power - the adapter is USB bus-powered and is recognized as a standard USB audio device.
- WORKS ON WINDOWS, MAC AND LINUX - Driverless on Windows 98SE/ME/2000/XP/Server 2003/Vista/7/8, Linux and Mac OSX, and compliant with the USB Audio Device Class 1.0 specification, so any system that supports class-compliant USB audio will see it. Select it as the sound output and input device after plugging it in.
- TWO JACKS, TWO JOBS - The green jack is stereo OUT for headphones or powered speakers; the pink jack is mono microphone IN for a 3.5mm mic. It does NOT support 4-pole headsets on a single combo plug, it does NOT power passive speakers, and it does NOT add surround sound - it is a stereo 2-channel adapter.
- FOR LAPTOPS AND DESKTOPS THAT NEED AN AUDIO PORT BACK - Adds a headphone and mic port to a laptop, desktop, or mini PC whose onboard jack has failed or was never there. Managed and work-issued computers can block new USB audio devices by policy - check with your IT department before ordering for a company machine.
- SABRENT SUPPORT AND WARRANTY - What is in the box: one USB audio sound adapter. Backed by a 1-year limited warranty, extended to 2 years when you register within 90 days on the manufacturer's website.
Does OBS automatically clear copyright for a news recording?
No. OBS plays and sends the file; it does not grant rights to the bulletin’s footage, music, clips or graphics.
Quick Recap
Best Value
- The new generation of the artist's interface: Connect your mic to Scarlett's 4th Gen mic pres. Plug in your guitar. Fire up the included software. Start making your first big hit
- Studio-quality sound: With a huge 120dB dynamic range, the newest generation of Scarlett uses the same converters as Focusrite’s flagship interfaces, found in the world's biggest studios
- Never lose a great take: Scarlett 4th Gen's Auto Gain sets the perfect level for your mic or guitar, and Clip Safe prevents clipping, so you can focus on the music
- Find your signature sound: Air mode lifts vocals and guitars to the front of the mix, adding musical presence and rich harmonic drive to your recordings
- With Scarlett 4th Gen, you have all you need to record, mix and master your music: Includes industry-leading recording software and a full collection of record-making plugins
Rank #4
- Podcast, Record, Live Stream, This Portable Audio Interface Covers it All - USB sound card for Mac or PC delivers 48kHz audio resolution for pristine recording every time
- Be ready for anything with this versatile M-AUDIO interface - Record guitar, vocals or line input signals with two combo XLR / Line / Instrument Inputs with phantom power
- Everything you Demand from an Audio Interface for Fuss-Free Monitoring - 1/4" headphone output and stereo 1/4" outputs for total monitoring flexibility; USB/Direct switch for zero latency monitoring
- Get the best out of your Microphones - M-Track Duo’s transparent Crystal Preamps guarantee optimal sound from all your microphones including condenser mics
- The MPC Production Experience - Includes MPC Beats Software complete with the essential production tools from Akai Professional
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
