Do these 3 things before closing this tab:
1Clear out junk files and repair common Windows errors2Fix the driver behind crashes, sound loss and screen glitches3Repair Windows errors before they cause bigger problemsiTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
In OBS, turn on Loop for a single-file Media Source, or use a VLC Video source with Loop Playlist enabled for several clips. If the story should play only once, prepare a second scene—such as a calm holding card or a live storyteller—and switch to it before the clip ends. The video ending and the YouTube broadcast ending are separate events, so check the broadcast controls in YouTube Live Control Room too.
Choose what should happen at the end of the story
Decide whether you want the video to repeat, move to another clip, or hand over to a live or holding scene. Set that behavior in OBS before going live; do not rely on the clip’s final frame to keep the screen populated.
| What you want | OBS approach | What to check |
|---|---|---|
| Repeat one story video | Media Source with Loop enabled | Confirm the file restarts as intended. |
| Cycle through several videos | VLC Video source with a playlist and Loop Playlist enabled | Choose a fixed order or shuffle, and confirm VLC is installed. |
| Stop the video but keep the program intentional | Switch to a prepared alternate scene before the clip finishes | Use a holding card, live storyteller, or planned transition rather than depending on the final frame. |
Set up one video to repeat in OBS
- In OBS, add a Media Source to the scene containing the story video.
- Select the video file. OBS documents common formats including MP4, MOV, MKV, and WebM, as well as audio files.
- Enable Loop in the Media Source settings if the file should restart automatically after playback ends.
- Preview the scene and let the file reach its end. Verify that playback starts again and that the transition is suitable for a children’s story.
Use a playlist for multiple stories
- Install VLC if it is not already installed; OBS’s VLC Video source requires it.
- Add a VLC Video source and build the playlist of clips you want to play.
- Enable Loop Playlist to cycle through the playlist after it reaches the end.
- Choose whether the playlist order stays fixed or shuffles, then preview the transition between clips and the return to the beginning.
Prepare a fallback scene if the video should play once
For a one-time reading, make an alternate scene before the stream begins. It could show the storyteller speaking live, display a calm holding card, or provide a planned transition to the next activity. OBS can hide a Media Source when its playback ends, so the final frame is not a dependable fallback.
Switch scenes before the clip finishes if you want to avoid a blank or unintended screen. Rehearse the handoff so the next scene is ready and the transition fits the pace of the story.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
Keep the YouTube broadcast state separate from OBS playback
A media source ending does not by itself tell you whether the YouTube broadcast is still live. Check the stream in YouTube Live Control Room and review its separate stream controls, including auto-start and auto-stop. Confirm the intended broadcast behavior before going live and monitor the live status independently of the clip or playlist.
Know the child-audience and age rules
- YouTube says creators must be at least 16 to livestream. It also says streams featuring 13–15-year-olds who are not visibly accompanied by an adult may have live chat disabled, and the account may temporarily lose access to live chat or other features. See YouTube’s age requirements and restrictions.
- If a stream is designated made for kids, YouTube disables live chat and live chat replay, and personalized ads are disabled on live streams and Premieres. Plan interaction and monetization accordingly; see YouTube’s made-for-kids guidance.
If you mean a YouTube player embedded on a page
The YouTube IFrame Player API has a loop parameter for an embedded player. To loop a single video, the playlist parameter must be set to that same video’s ID. This is an embedded-player setting, not an OBS source or encoder setting. See the YouTube IFrame Player API documentation.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Troubleshoot a video that ends or a stream that stops
| What you see | Likely area to check | What to do |
|---|---|---|
| The same clip ends and does not restart | Media Source playback setting | Open the source settings and confirm Loop is enabled; preview the source through the end again. |
| The playlist finishes instead of starting over | VLC Video playlist setting | Confirm Loop Playlist is enabled, VLC is installed, and the playlist contains the intended files. |
| The screen becomes blank when a one-time clip ends | Scene handoff | Switch to a prepared alternate scene before playback ends; do not depend on the ended source’s final frame. |
| The video ends and YouTube also stops the broadcast | Broadcast controls, separate from source playback | Check the stream and auto-start/auto-stop controls in YouTube Live Control Room. |
Or let it run in the cloud
For a prerecorded YouTube storytelling stream that should keep running without a home computer, StreamNeo loops uploaded videos from the cloud: upload the video, add your YouTube stream key, and go live. Nothing has to stay on at home; it streams the uploaded quality up to 4K 60fps at one price per slot, and automatically recovers if YouTube drops the stream. It plays uploaded videos rather than going live from a camera, and streams to YouTube only. The first day is free with no card. Monthly pricing is $9.99 per month. See StreamNeo or start the free day.
Windows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallCrashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteQuick Recap
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
