The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
To read Bird Construction’s earnings report, compare the same quarter and year-to-date period with the prior year, then reconcile revenue growth with margins, net income, operating cash flow, balance-sheet capacity and backlog. Bird’s latest release, for the third quarter of 2026, reported 37% year-over-year revenue growth, adjusted EBITDA above C$100 million and combined Backlog plus Pending Backlog of C$13.0 billion. Those are important signals, but backlog is not recognized revenue, adjusted EBITDA is not an IFRS measure, and neither headline proves how much profit or cash will ultimately be realized.
This guide shows a repeatable way to read the quarterly release, interim financial statements, notes and management’s discussion and analysis (MD&A). It uses Bird’s 2025 annual results as a worked example so you can see why revenue alone is an inadequate verdict on a construction company.
What does Bird Construction’s latest Q3 2026 report tell you?
The November 11, 2026 release points to strong reported growth, but the figures need to be separated into current performance and future visibility. Bird said:
- Q3 revenue increased 37%. Compare the release’s exact quarter and year-to-date tables with the equivalent 2025 periods; do not infer a full-year growth rate from one quarter.
- Adjusted EBITDA exceeded C$100 million. This is Bird’s adjusted measure, not automatically the same as IFRS operating income, net income or cash from operations. Read the reconciliation in the release and MD&A before comparing it with another company.
- Combined Backlog and Pending Backlog reached C$13.0 billion at quarter-end. Bird defines this as a visibility measure. It includes work at different stages of commitment and timing, so it is not a banked C$13.0 billion of revenue or profit.
- Management raised its 2027 revenue outlook. Treat that as management guidance and compare it with the assumptions and risk discussion in the release, rather than as a guaranteed result.
Chief executive Teri McKibbon characterized the quarter as a record period with broad-based organic growth, margin expansion and strong free-cash-flow generation. That is management’s description; the independent reading is to check the reported margin, operating cash flow and working-capital movements alongside it. The Q3 2026 results release contains the period tables and reconciliation.
Popular on Amazon
- Ergonomically Designed: Work in tight areas with a compact design that gets into tough spots
- Both tools are designed to fit into difficult to reach spaces
- Complete a wide range of applications with a high-performance motor that delivers up to 300 UWO, and an impact driver delivering up to 1,400 in-lbs of torque
- Both the DEWALT impact driver and drill driver feature integrated LED work lights with a convenient 20-second delay, ensuring enhanced visibility in dimly lit or challenging work areas
- One-Handed Loading - Keep one hand free with a 1/4 in. hex chuck that accepts 1 in. bit tips
What should you collect before analyzing a quarter?
Use the release as an index, then download the interim financial statements and MD&A. Keep the following items for both the current period and the comparable prior-year period:
- Income statement: revenue, gross profit, gross margin, operating income, net income, and basic and diluted earnings per share (EPS).
- Cash-flow statement: net cash from operating activities, investing and financing cash flows, capital expenditures, and the line Bird labels “cash flows from operations before changes in non-cash working capital.”
- Balance sheet: cash, accounts receivable, contract assets, current liabilities, debt, lease liabilities, and shareholders’ equity.
- Notes and MD&A: segment explanations, contract and credit-risk disclosures, acquisitions, impairment charges, accounting changes and non-GAAP reconciliations.
- Backlog definitions: record contracted Backlog and Pending Backlog separately if the report provides them, then note Bird’s combined presentation.
Compare a quarter with the same quarter a year earlier because construction is seasonal. Also compare year-to-date periods: a strong quarter can be offset by a weak first half, and a weak quarter can be a timing issue rather than a change in the annual trend.
How do you read Bird’s income statement?
Read from revenue down to EPS, asking at each line whether growth is improving or weakening the economics of the work.
1. Revenue: is activity actually expanding?
Revenue reflects work recognized under Bird’s contracts during the period, not the value of every contract signed. A 37% Q3 increase is evidence of higher recognized activity in that quarter, but you still need the year-to-date comparison, segment mix and discussion of project timing. Check whether growth is organic, acquisition-related, or caused by a change in the volume or stage of large projects.
2. Gross profit and gross margin: are projects being delivered economically?
Gross profit is revenue less direct construction costs. Gross margin is gross profit divided by revenue. Margin expansion can indicate better project execution, favorable mix, change orders or cost control; contraction can signal input inflation, claims, delays, provisions or an unfavorable mix. Always inspect the notes for contract estimates and unusual items before treating a one-quarter margin movement as a new normal.
3. Operating income: what remains after overhead and unusual charges?
Operating income subtracts selling, general and administrative costs and other operating items from gross profit. It is an IFRS measure and is therefore a useful anchor when management emphasizes an adjusted metric. A widening gap between gross-profit growth and operating-income growth can mean overhead is rising or that an impairment or restructuring charge is absorbing project profit.
4. Net income and EPS: what reaches shareholders?
Net income includes financing costs, taxes and non-operating items in addition to operating results. EPS divides attributable earnings by the weighted-average share count, so it can fall even when net income is stable if dilution increases; conversely, buybacks can lift EPS without improving operations. Review both basic and diluted EPS and identify whether tax, interest, impairment or other non-operating items drove the change.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Also popular on Amazon
- Valued Carpenter Pencil Set: You will get 2 pcs solid carpenter pencils with 26 piece 2.8 mm refills, 1 replaceable sharpener, 1 plastic storage box.The complete carpenter pencils combination allows you to finish your work faster and more easily
- Deep Hole Marker Pencil: The deep-hole construction pencils adopts 45mm elongated tip design, which is more convenient to mark in the small hole or in other tight areas that other carpenter markers cannot reach
- Carpenter Pencils with Sharpener: The sharpener is screwed into the top of the work pencil, which won't get lost either. Built-in pencil sharpener that keep the lead with pointed and smooth to Improves line of sight in fine work
- Stronger Solid Lead: This work pencil is matched with a 2.8 mm thick lead , which is much thicker and stronger during the drawing process of construction work, it will not break or damage easily
- Marks on Various Surfaces: 3 colors solid construction pencil can marks on various surfaces,such as metal, plastic, wood, paper etc. Ideals for woodworkers, contractors, craftsmen, builders, merchants and masons
What does Bird’s 2025 versus 2024 example reveal?
Bird’s audited 2025 annual report shows why a revenue-only conclusion would be misleading. The following figures are Canadian dollars in millions, except per-share amounts.
| Metric | 2025 | 2024 | What changed |
|---|---|---|---|
| Construction revenue | C$3,396.766m | C$3,397.346m | Essentially flat |
| Gross profit | C$356.908m | C$328.759m | Increased |
| Income from operations | C$75.006m | C$146.561m | Decreased sharply |
| Net income | C$47.411m | C$100.099m | Decreased sharply |
| Basic and diluted EPS | C$0.86 | C$1.84 | Decreased |
| Impairment loss on accounts receivable and contract assets | C$62.220m | Nil | Material 2025 charge |
Prices checked November 2026.
Revenue was nearly unchanged, while gross profit rose. Yet operating income, net income and EPS fell substantially. The C$62.220 million impairment of receivables and contract assets was a material part of the explanation. That pattern tells you to read the notes and credit-risk discussion: project activity can look healthy while collectability or contract-asset estimates damage reported earnings.
Do not automatically remove the impairment when judging performance. An adjusted view can help explain recurring operating capacity, but the charge is still an economic loss recognized by the company and may indicate customer, contract or claims risk. Use Bird’s own reconciliation and description rather than inventing an adjustment.
These figures come from Bird’s 2025 Annual Report.
Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Clear out junk files and repair common Windows errors3Fix the driver behind crashes, sound loss and screen glitchesWhat is Bird Construction’s adjusted EBITDA, and how should you use it?
Adjusted EBITDA is Bird’s non-GAAP performance measure intended to present earnings before interest, taxes, depreciation and amortization after specified adjustments. In Q3 2026, Bird reported adjusted EBITDA exceeding C$100 million. Quote the measure as Bird’s adjusted EBITDA; do not silently call it EBITDA, operating income, net income or cash flow.
Bird’s MD&A states that Adjusted Earnings, Adjusted EBITDA, Adjusted Earnings Per Share and Adjusted EBITDA Margin do not have standardized IFRS meanings and may not be comparable with similarly named measures at other companies. The appropriate procedure is:
- Start with the IFRS line used in Bird’s reconciliation.
- List every adjustment and ask whether it is genuinely unusual, non-cash, non-operating or recurring in practice.
- Calculate adjusted EBITDA margin as Bird defines it, using the same numerator and revenue denominator for every period.
- Compare periods within Bird first. Compare with another issuer only after checking that issuer’s definition and reconciliation.
Adjusted EBITDA is useful for assessing operating trend and covenant or valuation discussions, but it omits working-capital investment, capital expenditures, taxes, interest and debt repayment. It cannot substitute for net income or operating cash flow.
Also popular on Amazon
- 【Great Compatibility】This Katerk 1/4 inch hex shank bit holder is specifically designed for 1/4 inch hex shank drill bits. It's compatible with most 1/4 fast hex handles, hex sockets, various electric screwdrivers, and handheld screwdrivers. The bit holder makes it a valuable addition for any handyman.
- 【Secure and Safe】Built with a secure backup nut design, each drill bit holder securely locks onto your bits, ensuring they stay firmly in place. Additionally, our bit holder incorporates a high-quality steel ball rolling design that holds up to several kilograms of weight, ensuring your various drill bits don't fall off.
- 【Easy One-Handed Operation】The bit holder for impact driver allows you to change bits single-handedly, simplifying your workflow. Its multi-color design further allows for quick identification of the drill bit you need.
- 【Compact and Convenient】Thanks to its compact size, this 1/4 inch bit holder is easy to carry around. The bit holder allows for easy attachment to various tools, making this a convenient addition to your construction accessories. The Katerk bit holder is cast from high-quality alloy material, promising a long product lifespan. Despite its rugged strength, the bit holder remains lightweight, making it portable.
- 【Cool Christmas Gift For Men Stocking Stuffers】 This screwdriver bit holder, driver bit holder, impact bit holder, can be given as a gift to your loved one, especially for anyone involved in construction or electrical work. It's a must-have for stocking stuffers for men and women, tools gifts for dad, tech gadgets for men, gifts for dad, gifts for him, gifts for husband, gifts for boyfriend, cool gadgets for men, and cool gifts for dad.
Bird’s 2025 MD&A explains the definitions, reconciliations and comparability limits.
Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Repair Windows errors before they cause bigger problemsFix Now →How should you read Bird’s cash-flow statement?
Cash flow tests whether accounting earnings are turning into cash. Begin with net cash from operating activities, then explain the difference between that figure and net income by examining working capital.
Bird separately presents “cash flows from operations before changes in non-cash working capital.” This is not reported operating cash flow and it is not free cash flow. It is a starting-point measure before movements in receivables, contract assets, payables and other non-cash working-capital accounts.
| 2025 cash-flow item | 2025 | 2024 |
|---|---|---|
| Cash flows from operations before changes in non-cash working capital | C$230.191m | C$228.501m |
| Net cash from operating activities | C$113.110m | C$114.238m |
| Capital expenditures | C$41.285m | C$33.777m |
In 2025, the before-working-capital figure was similar to 2024, while reported operating cash flow was slightly lower. That gap shows how receivables, contract assets and other cash items intervened. Capital expenditures also increased. A simple owner-style cash proxy would begin with operating cash flow less capital expenditures, but do not label a self-created calculation as Bird’s free cash flow unless Bird defines it that way in the report.
For each quarter, ask whether operating cash flow is persistently below net income, whether receivables or contract assets are growing faster than revenue, and whether advance billings or payables are providing a temporary cash benefit. Working-capital swings can reverse in a later quarter, so inspect the year-to-date statement and the balance sheet together.
What balance-sheet checks matter for a contractor?
Liquidity and collectability deserve as much attention as leverage. Construction companies can report profit while cash is tied up in unpaid invoices or contract assets.
- Cash and available liquidity: note the cash balance, revolving facilities and any restrictions. Compare liquidity with near-term debt, lease payments and expected working-capital needs.
- Accounts receivable: look for aging, concentration and credit-risk commentary. The 2025 impairment on receivables and contract assets demonstrates why the balance deserves scrutiny.
- Contract assets: these represent amounts recognized under contract accounting before an unconditional right to invoice exists. Rising contract assets require evidence that billing and collection will follow.
- Debt and leases: assess maturities, interest costs, covenants and whether leverage is rising faster than earnings or cash.
- Equity: connect retained earnings, impairments and distributions to changes in net worth and borrowing capacity.
Do not rely on a single current ratio or debt-to-equity calculation without reading the definitions and seasonal context. A quarter-end balance can be unusually strong or weak depending on billing milestones and project timing.
Also popular on Amazon
- Toolwiz 17-inch magnetic sweeper maintaining a load capacity of up to 8.8 pounds provides a perfect solution to the problem of clearing small ferrous metal objects, such as nails, tacks, bolts, and metal shavings from workshops or garage floors.
- Convenient and portable:17” is good for home, small workshop, or small yard as it is space-saving and more reachable for narrow areas. Perfect for collecting nails or small parts in the car, under the table, and in other nooks or crannies.
- Upgraded Handle Design: The handle features a sturdy, non-telescopic design to completely prevent slipping during use. By simply adding or removing the extension poles, the height can be adjusted to 3 different lengths: 18.9" (48 cm), 32.5" (82.5 cm), and 42.5" (108 cm) from ground to top. This customizable height helps prevent back bending and muscle strain, making your cleaning tasks effortless
- Flexible wheels: Upgrade wheel screws to avoid being too tight to spin or too loose. More comfortable 3-inch rubber wheels roll smoothly on carpet, grass, concrete, and hardwood floors. Just push and pull this rolling magnet-sweeper to pick up metal nails easily.
- Lightweight materials: The magnetic nail sweeper's compact and lightweight design makes the sweeping can be done anywhere you want, Push or pull it under the furniture, passing through the workshop floor, driveway, mud, grass, and gravel.
How much backlog does Bird Construction have, and what does it mean?
Bird reported C$13.0 billion of combined Backlog and Pending Backlog at the end of Q3 2026. This is a forward-visibility indicator, not recognized revenue, a guarantee that every project will proceed, or a statement of expected profit.
Backlog generally refers to contracted work that Bird expects to execute. Pending Backlog is work that has been awarded or is otherwise identified by Bird but has not reached the same level of contractual commitment. Because the categories have different certainty, keep them separate when the report provides the split.
Backlog also lacks a standardized IFRS meaning and may not be comparable with another contractor’s backlog. To interpret the C$13.0 billion figure, ask:
- What portion is fully contracted versus pending?
- Over what period is management expecting conversion into revenue?
- What execution, schedule, permitting, customer-credit and cancellation risks are described?
- Could cost inflation or scope changes reduce margin even if the work converts?
- How concentrated is the total by customer, geography, segment or large project?
Never add backlog to current-period revenue or use it as a profit forecast. Treat it as an indicator of potential future activity whose conversion rate, timing and margin remain uncertain.
Which items can distort a quarter-to-quarter comparison?
Before declaring acceleration or deterioration, check for these sources of noise:
- Seasonality and project milestones: revenue recognition can move materially between quarters as projects reach different stages.
- Impairments and provisions: the 2025 receivable and contract-asset impairment reduced operating and net income even though gross profit increased.
- Acquisitions or disposals: inorganic revenue can make organic growth look stronger or weaker than it is.
- Claims, change orders and contract estimates: revisions to expected costs or recoveries can alter gross profit suddenly.
- Working-capital timing: billing, collections, retainage and supplier payments can make cash flow diverge from earnings.
- Non-GAAP adjustments: an item excluded from adjusted EBITDA may still recur economically.
- Share-count changes: diluted EPS can move because of options, convertible instruments or buybacks as well as net income.
Use the notes and MD&A to identify the cause, then decide whether it is a one-time event, a recurring operating condition or an unresolved risk.
What is a repeatable quarterly reading process?
Follow this sequence each time Bird publishes results:
Also popular on Amazon
- APPLY TO MOST DRILLS : 6 pieces screw extractors work with any drill and all the screw size or bolt (3-12mm), These extractor tools are used to reverse the damaged screw counterclockwise until it is released
- The DIY Tools for Men-Men won't know they need screw extractor set until they have one! This screw extractor set is GIFTS WRAP AVAILABLE, can be gifted to your loved ones as it reflects a fresh trend with fun and practical. Amazing and Unique tool gifts for men women. The must have stocking stuffers for men, gifts for dad, husband, father, him, guy teens, adult, Boyfriend, son on Birthdays, Christmas, Fathers Day or anniversary. Perfect Holiday Gifts Guide
- HIGH QUALITY - This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it's durable and easily to remove any damaged screws.
- EASY TO USE: Just two simple steps to get the job done - drill a hole with a cutting size using the right size screw extractor and easily remove the screw or bolt using the removal tool Hardness 63-65HRC: Titanium hardened steel material, more durable than most screw extractors on the market, better hardness and durability than others, buy with confidence and complete peace of mind
- Cool Gadgets for Men Dad Christmas Birthday Gifts for Men and Women - Men won't know they need screw extractor sets until they have one! Every screw has the potential to rust and break, which can create a situation where it cannot be removed. Owning it, there will be no anxiety about rusty screws. This screw extractor set is GIFTS WRAP AVAILABLE, can be gifted to your loved ones as it reflects a fresh trend with fun and practical. Amazing and unique tool gifts for men women. A must have stocking stuffer for men on birthdays, Christmas, Father's Day or anniversaries, a gifts for dads, husbands, fathers, him, adults, boyfriends, sons. The best and most practical and surprising Christmas gifts
- Record the period and comparison. Write down the quarter, year-to-date period and prior-year equivalents, plus the release date.
- Capture the headline operating data. Enter revenue, gross profit, operating income, net income, EPS and any segment revenue or margin figures.
- Calculate basic movements. Compute year-over-year percentage changes and gross-margin change in percentage points. Keep reported figures and your calculations clearly separated.
- Reconcile adjusted metrics. Read every line in the adjusted EBITDA and adjusted earnings reconciliation. Preserve Bird’s labels.
- Trace earnings to cash. Compare net income with operating cash flow and explain working-capital movements using the cash-flow statement and balance sheet.
- Check financial capacity. Review cash, receivables, contract assets, debt, leases, maturities and covenant language.
- Separate backlog categories. Record Backlog and Pending Backlog independently, then evaluate conversion timing and risk.
- Read management’s explanation critically. Put statements about execution, margin expansion or free cash flow beside the tables and risk disclosures.
- Write a conclusion with conditions. State whether growth, profitability, cash conversion and visibility improved, and name the evidence that could invalidate that view next quarter.
Where can you learn the accounting fundamentals?
If construction-company reports are unfamiliar, a general reference can help with the mechanics of balance sheets, income statements, cash-flow statements and ratio analysis. Pearson lists Understanding Financial Statements, 12th edition, by Lyn M. Fraser and Aileen Ormiston, as a print resource covering those topics. It is general education rather than a Bird-specific analysis; check the publisher’s current availability on the Pearson title page.
What is the practical conclusion from Bird’s reports?
Bird’s Q3 2026 release describes a company growing quickly, with 37% quarterly revenue growth, adjusted EBITDA above C$100 million and C$13.0 billion of combined Backlog and Pending Backlog. The correct reading is constructive but conditional: verify whether growth is broad-based and profitable, whether adjusted margins reconcile to IFRS results, whether receivables and contract assets convert to cash, and how much of the backlog is contracted rather than pending.
The 2025 example supplies the essential caution. Revenue was flat and gross profit improved, yet a large impairment coincided with steep declines in operating income, net income and EPS. A complete Bird analysis therefore joins five lenses—growth, margins, earnings, cash conversion and balance-sheet/backlog risk—instead of relying on any single headline number.
Recommended Free Tools
Frequently Asked Questions
Is Bird Construction profitable?
Yes, Bird reported C$47.411 million of net income and C$0.86 basic and diluted EPS for 2025, so it was profitable on an IFRS basis. Profitability weakened from 2024, however, when net income was C$100.099 million and EPS was C$1.84; the 2025 impairment and other operating effects must be considered.
What exactly does Bird’s adjusted EBITDA measure exclude?
The exclusions are defined in Bird’s reconciliation and can vary by period, so there is no universal list to apply from memory. Read the company’s schedule each quarter and distinguish excluded accounting items from cash costs that the business still has to pay.
Can Bird’s C$13.0 billion backlog be treated as future sales?
No. The figure combines contracted Backlog with Pending Backlog, and the two categories carry different levels of certainty. Conversion depends on awards becoming contracts, schedules, customer decisions, execution and final project economics.
Why might Bird’s operating cash flow differ from its net income?
Construction billing and collection timing move receivables, contract assets, payables and other working-capital accounts independently of when revenue and profit are recognized. Compare both the quarter and year-to-date cash-flow statements, then tie the changes to the balance-sheet movements and credit-risk notes.

