Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more

Do not let people work beside a humanoid robot until you have assessed the complete application—not just the robot—and verified its safeguards under the conditions in which it will operate. There is no single published product standard that covers every walking, AI-enabled humanoid as a complete system. The right evaluation combines a documented risk assessment, standards matched to the robot’s environment and users, manufacturer evidence, and validation of the actual deployment.

A robot’s collaborative label, CE mark, or vendor declaration does not establish that a particular task, tool, workspace, or human-access plan is safe. In the 2025 standards terminology, the focus is the collaborative application: robot, task, tooling, workspace, and human reach together.

What do you need before people can share a workspace with a humanoid?

Before a demo or production trial, identify the task, environment, people who may enter, robot mobility, likely contact, and target market. Then obtain the manufacturer’s machine-safety evidence and complete an application-specific risk assessment. Do not treat a polished demonstration, a safety label, or an emergency-stop button as a substitute for this work.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Use the sequence below as a practical evaluation plan. It is not a substitute for the applicable standards, a qualified risk assessment, or legal advice. In particular, confirm detailed compliance requirements against the official standard text and the law in the market where the robot will be used.

Popular on Amazon
Silkland 40Gbps USB C 90 Degree Right Angle Adapter 2 Pack, 240W USB4 | Male to Female Extender, 8K@60Hz, Thunderbolt 4/3, Steam Deck, ROG Ally, MacBook, Switch 2, iPhone 18/17/16/15, Quest 3 VR
  • 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
  • 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
  • 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
  • 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
  • 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.

Start with these prerequisites

  • Identify the model, software version, payload, end effector, and intended task.
  • Describe where the robot will work and the floor conditions, slopes, joints, and nearby fixtures.
  • List who may approach it: trained operators, contractors, visitors, children, or members of the public.
  • Determine whether it is static, wheeled, bipedal, or otherwise actively balancing.
  • Decide whether contact is intended, possible, or prohibited.
  • Identify the countries where the robot will be placed on the market and operated.

How do you choose the right standards for a humanoid robot?

There is no complete-system humanoid standard to apply universally. The standards stack depends on whether the robot is industrial or service-oriented, whether public access is possible, and whether it walks or otherwise needs active control to stay upright.

TÜV SÜD says, “There is currently no fully harmonised standard for humanoid robots as a complete system.” Its testing approach combines standards from related fields and assesses the robot for its intended environment and use. That means a standards list is a starting point for a risk assessment, not proof that every hazard has been addressed.

Situation Standards and guidance to consider Important scope point
Industrial robot application with restricted public access ISO 12100; ISO 10218-1:2025 and ISO 10218-2:2025; ANSI/A3 R15.06-2025 in the United States; ISO 13849 or IEC 62061 for safety-related control functions; IEC 60204-1 for electrical equipment Part 1 concerns the industrial robot; Part 2 addresses the application and integration. The 2025 editions incorporate collaborative-application content formerly associated with ISO/TS 15066.
Industrial mobile robot or humanoid that walks or actively balances The industrial stack above where applicable, plus ISO 3691-4 for driverless industrial trucks when in scope; ANSI/RIA R15.08 for industrial mobile robots; ISO/CD 25785-1 as emerging guidance for dynamically stable industrial mobile robots ISO/CD 25785-1 is still a committee draft, not a published conformity standard. It addresses robots that need active control to remain balanced, including legged robots.
Public-facing, commercial, personal-care, or home use ISO 13482:2014; ANSI/CAN/UL 3300 in the United States where applicable; ISO/TR 23482-2 and ISO 31101 for application guidance or safety management ISO 13482:2014 remains the current edition as of November 2026. A second edition is at the final-draft stage, not yet published.

Scope matters: ISO 10218-1:2025 and ISO 10218-2:2025 do not apply to service robots providing a service to people where the public can access them, consumer products, medical or healthcare robots, robots that lift people, or mobility when the robot or manipulator is fixed to or part of a mobile platform. A walking, public-facing humanoid should not be assessed using ISO 10218 alone.

Free tools Windows power users keep installed

One-click scans. No signup required.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

ISO 12100:2010 is the foundation for risk assessment and risk reduction; it was confirmed in 2022 and is now due for revision, with a draft revision under development. For control-system safety, ISO 13849-1:2023 and ISO 13849-2:2012 or IEC 62061:2021 may be relevant. IEC 61508 is a broader functional-safety framework for complex programmable systems. Select the method and required safety performance from the risk assessment and the applicable standards—not from a vendor’s marketing description.

The 2025 industrial robot standards are relatively recent: ISO 10218-1:2025 and ISO 10218-2:2025 were published on 5 February 2025. The U.S. national adoption, ANSI/A3 R15.06-2025, followed in parts: Parts 1 and 2 went on sale on 9 September 2025, and Part 3 on 29 October 2025. The U.S.-only Part 3 covers use of industrial robot cells.

What should you ask the vendor before the robot works next to staff?

Ask for a technical evidence package that clearly separates the robot’s own assessment from the application you are responsible for. A declaration or certificate may cover the machine or a defined configuration, but it does not automatically validate your tool, task, layout, or people-access plan.

  • What standards and editions were used? Ask whether the robot is assessed as an industrial robot, a service robot, or both, and request the declaration of conformity or equivalent documentation relevant to that scope. For a service or public-facing robot, ask about ISO 13482 and UL 3300 where applicable; for industrial equipment, ask about ISO 10218 and relevant UL standards.
  • What is outside the assessment? Request a written statement identifying excluded tools, payloads, tasks, workspaces, operating modes, software behaviours, and application-level hazards.
  • What happens at the limits? Obtain stopping distances and times, force characteristics under load, payload envelopes, speed limits, sensor coverage, and behaviour after a fault or loss of person-detection confidence.
  • What safety functions are safety-rated? Ask for the performance level (PL) or safety integrity level (SIL) evidence for stops, speed or force limits, and presence detection. Ask how software, perception, and AI affect those functions.
  • How does it behave when power is lost? For a biped, ask whether it falls, kneels, or uses another controlled response, and what energy-control procedure is required during maintenance.
  • How are updates, remote access, and batteries controlled? Request cybersecurity assumptions, update controls, battery and hot-swap instructions, and any thermal or charging limits specified by the manufacturer.
  • What changes require revalidation? Get an explicit list covering programs, tools, payloads, fixtures, floor layout, software updates, and operating modes.

For EU use, ask whether CE marking is claimed under the relevant legislation and which standards were used. The EU Machinery Regulation (EU) 2023/1230 applies from 20 January 2027. Depending on the robot’s design and market, the EU AI Act, Cyber Resilience Act, and Battery Regulation may also be relevant; none should be assumed to apply in the same way to every product. CE marking is a legal conformity claim where applicable, not a third-party guarantee that your particular application is safe.

What’s actually slowing this PC down?

Pick the symptom - the matching free tool is one click away.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Also popular on Amazon
Anker USB C Hub, 5-in-1 USBC to HDMI Splitter with 4K Display | 85W Max PD, 1 Powered USB-C 5Gbps & 2 Powered USB-A 3.0 5Gbps Data Ports, for MacBook Pro, MacBook Air, Dell and More (Black)
  • 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
  • Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
  • Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
  • HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
  • What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.

How do you assess the application under ISO 12100?

Assess the whole system: robot, workpiece, program, end effector, connected machinery, workspace, and the people who may encounter it. Include setup and recovery tasks, not only normal production. OSHA notes that robot accidents often occur during non-routine work such as programming, maintenance, testing, setup, and adjustment, when a worker is inside the operating envelope.

  1. Define the limits. Record the robot model and configuration, payload, end effector, workpiece, operating speed, cycle, workspace, and all modes: automatic operation, teaching, testing, jam recovery, cleaning, maintenance, and battery swap. Include reasonably foreseeable misuse, such as blocking a sensor, overloading the robot, or entering its path.
  2. Identify hazards. Consider whole-body collisions; crushing or trapping between the robot and a wall, fixture, or person; falls and dropped payloads; unexpected startup; software or control failures; sensor disruption; cyber compromise; electrical and battery hazards; and maintenance inside the working envelope.
  3. Estimate and evaluate risk. Consider severity, frequency and duration of exposure, likelihood of occurrence, and whether a person can avoid the hazard. Pay special attention to untrained people and to tasks that put workers close to the robot.
  4. Reduce risk in the right order. Prioritise inherently safer design, then safeguarding and complementary protective measures, then information for use such as training, markings, and PPE. Instructions do not replace feasible engineering safeguards.
  5. Verify and validate the built application. Check safety functions and protective measures in the actual configuration and under worst-case operating conditions, including maximum speed, payload, and relevant geometry. Record the evidence and acceptance decisions.
  6. Set reassessment triggers. Require a review before changes to the program, tool, payload, cell layout, floor conditions, safety settings, or software that could affect behaviour or safety functions.

ISO 12100 is a process standard, not a humanoid-specific hazard checklist. The risk register should explain why each hazard is acceptably controlled in the particular application.

Which collaborative operating method should you use?

Choose a method—or a combination—based on the hazards and the risk assessment. The 2025 industrial-robot terminology treats collaborative operation as an application characteristic, not an inherent property of a robot model.

Method What it does Evidence to require
Monitored standstill Stops robot motion when a person occupies the collaborative workspace. Safety-rated presence detection and stop function; proof that motion cannot continue or restart while the area is occupied.
Hand guiding Allows a person to guide the robot using a designated device. Safety-rated enabling or dead-man control, speed limits, and safe behaviour when the device is released.
Speed and separation monitoring (SSM) Reduces speed as a person approaches and stops below the required separation distance. Safety-rated sensing, response time, stopping-distance evidence, and a documented minimum-separation calculation. ISO 13855-based calculations commonly use a human approach speed of 1.6 m/s.
Power and force limiting (PFL) Permits contact only when force and pressure are controlled within applicable body-region limits. Measured transient and quasi-static force and pressure for the actual application, using suitable biofidel measurement equipment—not just the robot’s published specifications.

ISO 10218-2:2025 incorporates collaborative-application content previously found in ISO/TS 15066:2016. ISO/TS 15066 remains formally published, but its collaborative content is now included in the 2025 application standard. Its model considers 29 specific body areas grouped into 12 regions, with tissue spring constants ranging from 10 N/mm for the abdomen to 150 N/mm for the skull and forehead.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Secondary evaluation guides commonly cite planning examples such as skull or forehead limits of 130 N transient and 65 N quasi-static; face, 65 N and 45 N; hands or fingers, 150 N and 75 N; and chest, 140 N and 70 N. These are not a substitute for checking the relevant tables and conditions in the official ISO 10218-2:2025 text before relying on a value in a compliance file. Contact limits are not permission to design for routine impacts, especially to the head or face.

A generic load cell or an OEM force specification does not establish PFL compliance. The measurement must represent the stiffness of the relevant body region and the real application. Test the installed tool, fixture, program, payload, and operating conditions; revalidate after changes. Hands and fingers are common first-contact areas in collaborative work, but the assessment must consider all plausible contact locations.

For SSM, verify actual sensing coverage and stopping performance. A calculation must account for human approach, sensor and control response, and robot stopping distance. A scanner’s presence alone does not prove that separation is adequate: occlusion, blind spots, floor layout, speed, load, and configuration matter.

Also popular on Amazon
Anker USB C Hub, 7in1 Multi-Port USB Adapter, 4K@60Hz USBC to HDMI Splitter | 85W Max PD, 2 USB 3.0 & 1 USBC Data Ports, SD/TF Card Reader, for Laptops/Mac and Other Type C Devices (Charger Not Included)
  • Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
  • Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
  • Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
  • Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
  • What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.

What extra checks matter when the humanoid walks?

Walking introduces fall, balance, and stored-energy hazards that an arm-only collaborative-robot checklist can miss. A biped may need active control and power to remain upright; ISO/CD 25785-1 is being developed for dynamically stable industrial mobile robots, including legged robots, but it is not yet a published conformity standard.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Plan for a fall, not just a stop

Request the manufacturer’s fall behaviour and specifications, assess the floor’s friction and unevenness, and define a fall or exclusion zone based on the robot and site. A secondary standards guide illustrates a 1.7 m robot moving at 1.5 m/s with a fall zone on the order of 2 m in any direction; that is a planning illustration, not a regulatory limit. The required space depends on the robot, speed, geometry, floor, and manufacturer’s data. A kneeling “zero-energy pose,” if specified by the manufacturer, does not replace a fall-zone assessment.

Reconcile maintenance isolation with active balance

OSHA’s lockout/tagout rule, 29 CFR 1910.147, generally addresses control of hazardous energy. Removing power from a balancing robot may itself cause a fall hazard. Do not invent an informal exception to isolation: document the energy-control method with qualified safety personnel and follow applicable requirements. Commentary on alternative control approaches—such as maintaining active balance within a restricted envelope—does not create an OSHA humanoid-specific rule.

Include batteries and tools

Use the manufacturer’s battery handling and hot-swap procedure, including any thermal lockout thresholds, marked swap area, and fire precautions. Consider electrical hazards and applicable electrical-safety requirements, including NFPA 70E where relevant. Do not substitute guessed temperature or battery limits for the OEM’s instructions.

Also assess the actual end effector and payload. A force-limited arm fitted with a sharp tool or carrying a heavy, rigid object does not make the resulting application safe by itself. ISO/TR 20218-1 provides related end-effector safety guidance cited in humanoid testing discussions.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

How should you evaluate AI and cybersecurity risks?

AI-enabled behaviour can create hazardous motion without a conventional hardware failure. Establish the robot’s tested operating domain and evaluate how it responds when perception or localisation becomes unreliable. Include sensor glare, smoke, vibration, occlusion, and other conditions identified as relevant to the site.

Ask what the robot does when person-detection confidence drops, sensors disagree, or the system loses localisation. The safe response should be defined and validated, not left to an assumed AI judgment. ISO/IEC CD TS 22440 on AI in functional safety is under development; its concepts include data quality, uncertainty, and perception limitations, but it is not a current published conformity standard.

Also popular on Amazon
BENFEI USB C Hub 5-in-1 with 4K HDMI(Certified), 100W Power Delivery, 3 USB-A, Silicone Cable, Aluminum Case Compatible with MacBook Pro/Air, iPad Pro, iMac, iPhone 15 Pro/Pro Max, XPS, Thinkpad
  • Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
  • Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
  • 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
  • 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
  • Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.

For connected robots, remote access and software updates are physical-safety issues as well as IT issues. Document who can change safety-relevant settings, how updates are approved, and what testing is required after an update. TÜV SÜD cites IEC 62443 and EN 50742 for cybersecurity in industrial automation and machinery; UL 5500 is cited for remote-update safety. Apply the standards and obligations relevant to the product and market rather than assuming every framework applies identically.

What should be in place before the first people-nearby trial?

Use this go/no-go checklist. If a relevant item is missing, keep people out of the operating or fall zone until the gap is addressed.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
  1. Intended tasks, foreseeable misuse, and human-access class are documented.
  2. The standards stack is selected for industrial or service use, mobility, access, and target market.
  3. Manufacturer evidence and explicit scope exclusions are on file.
  4. An ISO 12100 application risk assessment covers normal and non-routine tasks.
  5. Each collaborative method is selected with a documented rationale.
  6. Safety functions have evidence for required PL or SIL, response, stop performance, and sensing.
  7. If using PFL, force and pressure are measured on the live application with appropriate biofidel equipment under worst-case conditions.
  8. If using SSM, sensor latency and stopping distance support the calculated minimum separation.
  9. If the robot walks, fall-zone planning, floor conditions, power-loss behaviour, and energy-control procedures are documented.
  10. Emergency stops are accessible, present at appropriate access points, and verified. They are for emergency use, not routine production stopping.
  11. Cybersecurity and remote-update constraints are documented for connected equipment.
  12. Operators and maintenance staff receive instructions and training, including reset and emergency procedures.
  13. Inspection and maintenance schedules cover emergency stops, scanners, interlocks, force sensors, and battery systems.
  14. Reassessment triggers, incident recording, and monitoring responsibilities are defined.
  15. The organisation responsible for the deployment accepts the documented residual risk.

For ongoing operation, monitor stopping and separation events, contacts, faults, and relevant AI or model changes. Restrict access to trained and authorised people where required; use physical barriers or safety-rated sensing where the assessment calls for them; and prevent automatic restart while a person may remain in the work envelope. Revalidate after changes rather than assuming the original assessment still applies.

Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Support on Ko-Fi

What do CE marking and certification establish?

CE marking is required when the product falls under applicable EU legislation, but it does not mean that a third party certified the particular deployment. For industrial robots under the former Machinery Directive path, the manufacturer’s own declaration commonly supported the robot’s CE marking; a mark on the machine is not a verdict on the integrated cell or site. For EU products, determine the applicable legal route and obligations for the date the product is placed on the market, including the Machinery Regulation’s 20 January 2027 application date.

Certification of humanoid systems is possible against a combination of relevant standards and the state of the art, even though a single harmonised humanoid product standard does not exist. A third-party assessment can add evidence, but it still has a defined scope. Ask what system, version, task, and environment it covered. TÜV SÜD describes testing as evaluating whether a humanoid can operate safely in its intended environment, especially where people are nearby or interact directly with it.

In the United States, OSHA states, “There are currently no specific OSHA standards for the robotics industry.” Employers still have obligations under applicable rules, including machine guarding (29 CFR 1910.212), lockout/tagout (29 CFR 1910.147), electrical and PPE requirements, and the General Duty Clause. Consensus standards can help show how recognised hazards are addressed. UL 3300 was added to OSHA’s Nationally Recognized Testing Laboratory Program list of appropriate test standards on 31 December 2025 for relevant service, communication, information, education, and entertainment robots. It does not automatically replace an application risk assessment.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

As of November 2026, ISO 13482:2014 remains the published personal-care robot standard, confirmed in 2020 and marked for revision. Its second edition, retitled Robotics — Safety requirements for service robots, is at the final-draft stage and is not yet published. ISO/CD 25785-1 is likewise still under development. Do not treat either draft as a current published conformity basis.

Also popular on Amazon
Sale
𝟒𝐏𝐚𝐜𝐤 𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 USB to USB C Adapter,Type-C Female to A Male Charger Converter for iPhone 18 Charger,iWatch Ultra SE 9 10,iPhone 17 Pro Max 16 15 14,Samsung S25,AirPods,iPad,Car,Xbox
  • 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
  • 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
  • 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
  • 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
  • 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.

How much do the standards and measurement tools cost?

Standards and measurement equipment are supporting resources, not substitutes for risk assessment or validation. The ISO store listed each 2025 ISO 10218 part at CHF 227 in the available data; prices and availability can change, so check the publisher before purchasing. Price information below is checked Nov 2026.

Resource Reported price What it supports
ISO 10218-1:2025 CHF 227 Industrial robot manufacturer requirements; 95 pages.
ISO 10218-2:2025 CHF 227 Industrial robot application and cell integration; 223 pages.
Biofidel PFL measurement kits Starter kits from under $10,000; a typical kit about $16,000; full nine-gauge kit about $37,000 Force-and-pressure measurement for application validation. These are reported market figures, not a required purchase price.

Safety-rated laser scanners, light curtains, pressure mats, safety PLCs, emergency-stop devices, force/torque sensors, barriers, and floor markings may support particular protective measures. A scanner or an e-stop does not make an application safe merely because it has been installed. Select devices for the required safety function, coverage, and performance, then verify the complete system.

How did the 2025 standards change collaborative-robot evaluation?

The key change for evaluators is the stronger application focus: a robot’s safety cannot be separated from its task, tools, workspace, and human access. ISO 10218-2:2025 incorporates material previously associated with ISO/TS 15066, including human-robot contact considerations, while the updated terminology uses “collaborative application” rather than implying that a robot is inherently collaborative.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

For workplace evaluation, use the 2025 edition relevant to the application and the matching national adoption where required. Do not assume that an old assessment, legacy robot label, or older checklist covers the current configuration. Conversely, do not treat a new standard edition as an automatic certification of a particular cell; the integrator and deploying organisation still need to assess and validate the application.

Frequently Asked Questions

Does ISO 13482 cover every humanoid robot?

No. The 2014 edition covers defined personal-care robot categories and excludes, among other things, industrial robots, medical devices, toys, and flying or water-borne robots. Check the robot’s intended function and scope rather than relying on the word “humanoid.”

Can a humanoid be certified before the new service-robot standard is published?

Yes. TÜV SÜD says assessment and certification can use relevant standards from related fields as a combined basis. The certificate or assessment still needs a clear scope, and the pending ISO 13482 second edition should not be described as already published.

Does an emergency stop satisfy OSHA lockout/tagout?

No. An emergency stop is not a substitute for an energy-control procedure under applicable lockout/tagout requirements. A walking robot may also create a fall hazard when de-energised, so its isolation procedure needs careful, qualified review rather than an improvised exception.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Are published humanoid injury rates available for judging risk?

No primary injury-rate series for humanoids deployed around people has been identified. That absence is not evidence of zero risk; site-specific hazard identification and conservative validation remain necessary.

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply. Prices as of November 19, 2026 7:04 am GMT.