Often, yes—but only if your robot supports multi-floor maps and has already saved a map of the floor you want to clean. Some models recognize a saved floor when you carry the vacuum there; others have just one map or require a particular cleaning mode. Check the instructions for your exact model before moving the dock or deleting a map.
What determines whether you can skip remapping?
Two things matter: whether the robot supports maps for separate floors, and whether the destination floor has already been mapped and saved. A robot that has only one map may still vacuum upstairs in a general whole-area mode, but that does not necessarily give it mapped navigation or room-by-room cleaning there.
Map capacity alone is not proof of multi-floor support. Roborock’s FAQ says the S6, S4 and S5 Max could save three maps, but maps for different floors require the multi-floor feature to be supported and enabled. Check your exact model’s manual or app rather than inferring support from the number of maps it can store.
How to use a saved floor map
Roborock models with multi-floor support
Roborock’s support guide uses the S7 as its example. It says the initial map is made in saved-map mode by starting the robot at its dock, mapping the intended rooms and returning to that dock. To map another floor, enable multi-floor mode, choose “create new map,” then carry the robot alone to the other level. Roborock says it returns to its starting point and stores the map.
#1 Best Overall
- 【2-in-1 Mopping and Vacuuming】 The ROPVACNIC Robot S1 integrates advanced electronically controlled mopping technology, significantly enhancing both cleaning efficiency and effectiveness, which makes your floors remain free from footprints, dirt, and dust throughout the day. It features an upgraded high-capacity water tank with a four-stage personalized water adjustment system, enabling it to address various stains across different settings according to user requirements.
- 【Comprehensive Intelligent Control】 Multiple Cleaning Modes, combined with personalized settings, allow you to easily accomplish various household cleaning tasks with zero effort from your smartphone. Moreover, by voice commands, you can start your cleaning while kicking back and relaxing (compatible with Alexa or Google Assistant). Enjoy an utterly hands-free cleaning experience.
- 【5200Pa Powerful Suction】A 3-point cleaning system coupled with strong suction ensures your floors are free from all dirt, dust, and crumbs for a thorough, superior clean. The highly passable compact design combined with 3-level suction facilitates cleaning in hard-to-reach areas where you can't, making it suitable for a wide range of surfaces from wood, and hard floors to low pile carpets.
- 【Smarter High Automation & Self-Recharge】 The robot aspiradora is equipped with an advanced high-coverage sensing system and multiple algorithmic data points, enabling autonomous completion of cleaning tasks—from scheduled starting, detecting obstacles, adjusting direction, and switching modes, to automatically returning to recharge. This hassle-free operation ensures a clean home when you return.
- 【Engineered for Pet Owner】 The exclusive no-entanglement design negates the need for your dirty hands to clean up tangled dog or cat hair, unlike traditional roller brushes. Its dual rotating electric side brushes sweep and collect hidden pet hair more efficiently throughout the house, saving you the hassle.
After the maps are created, Roborock says to carry the vacuum alone to the target floor and start it. The robot should recognize the floor and use its corresponding map; the dock does not need to go upstairs. Roborock lists the S4, S4 Max, S5 Max, S6, S6 Pure, S6 MaxV, S7, S7 MaxV, S8, S8+, S8 Pro Ultra, Q Revo, Q8 Max and Q5 Pro as supporting multi-floor maps. The guide notes that steps can vary slightly by model and firmware, so confirm the workflow for your particular device.
iRobot Roomba models
iRobot’s instructions depend on the model. Its Imprint Smart Maps guide says compatible robots can be brought to another separate space for a new mapping run. It also says the i3–i5 family supports only one Smart Map, so do not assume every Roomba can save a map for each floor.
Rank #2
- 5000Pa Strong Suction: Robot Vacuum With 5000Pa suction power, it effortlessly removes pet hair, dust, and debris from all types of floors. It can also easily clean on short-pile & medium-pile carpets
- Vacuum & Mop in One Go: G8000 Max robot vacuum is equipped with 450 ml dustbin and 300 ml water tank combo, it supports simultaneous vacuuming and mopping in one go. The innovative design reduces cleaning time by 50%, enhancing household efficiency
- Long Battery Life, Always Ready: Up to 150 minutes in quiet mode, meeting daily cleaning needs and automatically recharging when the battery is low, always ready for the next cleaning task
- 4 Control Ways & 4 Cleaning Modes: Supports 4 control methods: App, Remote, Voice, and Button, making it ideal for wives, seniors, and parents. Choose from 4 cleaning modes(Spot, Edge, Zig-zag, and Manual cleaning) to meet your daily cleaning needs. The Zig-zag mode ensures maximum coverage and cleaning efficiency
- Ultra-Slim Design, Smart Sensors: The robot cleaner is 2.99 inches in height, it easily reaches under beds, sofas, and cabinets for thorough cleaning. With anti-collision and anti-fall sensor technology, it intelligently navigates around obstacles, walls, and stairs
A separate iRobot guide says i3, i4 and i5 models can clean another floor without making a new map by starting a “Clean Everywhere” job. That is different from selecting mapped rooms: directed room cleaning must start at the charging station, and picking up the robot during a job interrupts that mode’s localization. The guide notes regional firmware requirements; check the support page for your region and current software.
Should you move the charging dock?
Do not relocate the dock unless your model’s instructions call for it. Roborock’s described workflow for the listed multi-floor models does not require moving the dock when mapping or cleaning additional floors. iRobot advises against moving its charging station to another floor because the robot uses the base as a point of reference when beginning a mission.
Rank #3
- Fits Pet Owners and Hard Floors: With a tangle-free suction port, V2 robot vacuum focuses on picking up hair without tangle; It also tackles dirt, crumbs and debris effectively on hardwood, tile, laminate, stone and low pile carpet
- Ultra-Slim Design: The 2.99-inch low profile allows the V2 robot vacuum cleaner to easily clean under beds, sofas, and other furniture
- Friendly Remote Control: The V2 vacuum robot equipped a physical remote control, no Wi-Fi connection is required for operation. Start cleaning easily via the remote or one-touch button, simple to operate for all family members
- Multiple Cleaning Modes: The V2 robot vacuum cleaner features multiple cleaning modes including auto clean, spot clean, and edge clean for thorough coverage
- Schedule Cleaning & Automatic Charging: V2 vacuum robot can run routine cleaning automatically based on preset schedule, it cleans up to 120 minutes on a single charge and automatically returns to the charging dock when the battery is low
Dock requirements are model- and task-specific. A general clean on another floor may work even when a directed room clean cannot; check the instructions for the mode you intend to use.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Quick checks before carrying the vacuum upstairs
- Confirm multi-floor support. Verify it for the exact model and firmware in the manufacturer’s app or support documentation.
- Save the destination map first. Carrying a robot to an unmapped floor does not automatically mean it can use a saved map there.
- Check how the map is selected. The reviewed Roborock guide describes automatic floor recognition for its listed models. Other models may use a different selection or mapping process.
- Choose the right cleaning mode. If there is no second map, see whether the robot offers a whole-area mode, and whether room selection requires a saved map or a dock start.
- Leave the dock where instructed. Do not move it between floors unless the model’s guidance specifically requires that.
- Check before deleting or remapping. Map behavior and setup can differ by model, region and firmware; consult the current official instructions before removing a saved map.
Manufacturer guidance supports these workflows for the named Roborock and iRobot models, not every robot vacuum. Their support pages do not display publication dates, so map-count figures should be treated as model-specific statements rather than universal current limits.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
