The Tool Desk
Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →Most often, OBS reaches the end of a video because the source’s loop option is off, or a scene change hides or resets the source. First identify whether the video is an OBS Media Source or a VLC Video source; their playback and visibility settings differ. If OBS keeps playing in its preview or a local recording but YouTube freezes or drops frames, investigate stream delivery instead of changing the loop setting.
Identify what kind of video source you are using
In the OBS Sources list, find the source that plays the church video. Open its properties and note whether it is a Media Source or VLC Video. They are separate source types with different controls. OBS’s Media Sources documentation, published January 11, 2022, describes the settings below; labels may differ in later OBS versions.
Media Source
A Media Source plays a selected media file. Its Loop setting determines whether that file plays again after reaching the end, and OBS documents the default as off. Open the source properties and check Loop. If the box is unchecked, playback can finish without starting over.
Also inspect Show nothing when playback ends. When enabled, the source can disappear after the file finishes, making an end-of-file condition look like a failed loop. Check Restart playback when source becomes active if the source is used across scene changes: this setting restarts playback when the source is in the current scene and visible.
Recommended Free Tools
#1 Best Overall
- 【1080P 60FPS Video Capture Card】 This HDMI game capture card is based on USB3.0 high speed transmission port, input resolution up to 4K@30HZ, output resolution up to 2K@30Hz or 1920×1080@60Hz. Type c and USB interface can meet most of the devices in daily life. Easily meet the online capture, real-time recording, online meetings, live gaming and other functions, so you have a better visual enjoyment. Note: For capture use only; requires capture software to function and is not intended for direct screen casting to a monitor or TV
- 【Ultra Low Latency Screen Sharing】 HDMI capture card is made of good quality aluminum alloy with strong heat dissipation, allowing you to enjoy ultra low latency while live gaming or video recording or live streaming, avoiding blue screens and lag. This HDMI to USBC capture card supports easy recording of good quality audio or HD video and transferring it to your computer or streaming platform, allowing you to record 60 fps HD video directly on your hard drive and real-time preview
- 【Plug and Play, Easy to Carry】 This HDMI 1080P video capture card does not require any additional drivers or external power supply, just plug and play for fast capture. The capture card is small and lightweight, so you can put it in your bag for emergencies, making it very portable for outdoor live streaming. It's also a great way to share content in game recording, video conference, video recorder and online teaching
- 【Wide Compatibility USB Capture Card】 Easily streams to Facebook, Youtube or Twitch. With the connection, this HDMI to USB C/3.0 video capture devices can be working on several Operating Systems and various software: Windows 7/ 8/ 10, Mac OS or above, Linux, Android, Laptop, Xbox One, PS3/PS4/PS5, Camera, DVDs, Set Top Box, Webcame, DSLR, Switch/Switch 2, TV BOX, HDTV, Potplayer/VLC, ZOOM, OBS Studio etc.
- 【Package Content & Note】 1x HD Audio Capture Card , 1x USB 3.0 to USB C Adapter (A-side 3.0, B-side 2.0), 1x user manual. Please note that you need to restart the OBS Studio software after the audio setup is complete, otherwise it will result in no sound output. When using an adapter, if the device is recognized as USB 2.0, try using the other side with the USB-C port. Simply flip the capture card and reconnect it to be recognized as USB 3.0
VLC Video
VLC Video is a playlist source, not the same source type as Media Source. Its Loop Playlist option is on by default, but that does not mean playback continues unchanged through scene changes. The documented default for Visibility Behaviour is to stop when the source is not visible and restart when it becomes visible. If the video stops or begins again after switching scenes, inspect this setting and test the transition.
VLC must be installed for the VLC Video source to be available. If you use 64-bit OBS, OBS documentation specifies 64-bit VLC.
Rank #2
- 【1080P HD High Quality】Capture resolution up to 1080p for video source and it is ideal for all HDMI devices such as PS4, PS3, Xbox One, Xbox 360, Wii U, DVDs, DSLR, Camera, Security Camera and set top box. Note: Video input supports 4K30/60Hz and 1080p120/144Hz. Does not support 4K120Hz/144Hz. Output supports up to 2K30Hz.
- 【Plug and Play】No driver or external power supply required, true PnP. Once plugged in, the device is identified automatically as a webcam. Detect input and adjust output automatically. Won't occupy CPU, optional audio capture. No freeze with correct setting.
- 【Compatible with Multiple Systems】suitable for Windows and Mac OS. High speed USB 3.0 technology and superior low latency technology makes it easier for you to transmit live streaming to Twitch, Youtube, Facebook, Twitter, OBS, Potplayer and VLC.
- 【HDMI LOOP-OUT】Based on the high-speed USB 3.0 technology, it can capture one single channel HD HDMI video signal. There is no delay when you are playing game live.
- 【Support Mic-in for Commentary】Rybozen capture card has microphone input and you can use it to add external commentary when playing a game. Please note: it only accepts 3.5mm TRS standard microphone headset.
Diagnose the symptom before changing settings
| What you see | Check first | What it can indicate |
|---|---|---|
| The video reaches its end in OBS and stays on the last frame or disappears | Media Source Loop and Show nothing when playback ends | Loop is off by default; the end-of-file option affects whether the completed source is hidden. |
| The video stops or starts over after a scene switch | Source visibility and activation; for VLC Video, Visibility Behaviour; for Media Source, Restart playback when source becomes active | A hidden source may stop or restart according to its visibility settings. |
| OBS preview plays, but YouTube freezes, drops frames, or disconnects | Compare local output with YouTube; inspect encoder errors, CPU load, local recording, and outbound connection | The local media may be playing correctly while the encoded stream is not being delivered reliably. |
| The encoder cannot start the YouTube stream | Stream key and YouTube Live Control Room configuration | A stream-start problem is separate from whether a local OBS source repeats its file. |
Check scene changes and inactive-source behavior
- Watch the Sources list during a scene change. Confirm whether the video source remains visible in the active scene or becomes hidden. A source that is no longer visible may behave differently from one that stays active.
- Review the source’s visibility and restart options. For Media Source, check Restart playback when source becomes active. For VLC Video, review Visibility Behaviour and choose the behavior that fits how your service uses scenes.
- Check Close file when inactive. This option unloads the file when the source is inactive or off the current scene and can cause a delay when it returns. It is worth checking if the source is slow to reappear; OBS documentation does not establish that this setting disables looping.
- Test the full scene sequence before going live. Switch between the scenes used during the service and observe whether the source continues, pauses, stops, or restarts. This helps distinguish an expected visibility behavior from a loop setting that is off.
Separate playback problems from YouTube delivery problems
Compare OBS’s preview and a local recording with what viewers see on YouTube. YouTube’s live-stream troubleshooting guidance recommends checking encoder output and reported errors, CPU load, and a local archive. If the local output is healthy but the YouTube stream is not, test the outbound internet connection. That points toward delivery rather than the video file’s repeat setting.
If OBS reports dropped frames or the stream disconnects, OBS’s connection troubleshooting guidance identifies an unstable connection to the ingest server or a bitrate the connection cannot sustain as possible causes. OBS recommends a wired connection because Wi-Fi may be unstable. These remedies are relevant to connection symptoms; they will not turn on looping for a Media Source whose Loop option is unchecked.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Rank #3
- 【4K HDMI Input, 2K@30Hz Recording】Powered by a true USB 3.0 high-speed interface, the capture card supports up to 4K@30Hz HDMI input and records at 2K@30Hz or 1080P@60Hz. Perfect for gamers, streamers, and professionals who need crisp, smooth video for live streaming, gameplay recording, or online meetings.
- 【Ultra Low Latency Screen Sharing】Built with a premium aluminum alloy shell and advanced chipset for stable heat dissipation, ensuring ultra-low latency transmission. Capture high-quality video and dual-channel audio in real time—no lag, no frame drop—ideal for Twitch, YouTube, or OBS streaming.
- 【Easy Plug and Play, Compact & Portable】No driver or external power required—just plug and play via USB 3.0 or Type-C connection to your Windows or macOS computer. Lightweight and compact design makes it easy to carry for outdoor streaming, live shows, or mobile recording setups.
- 【Wide Compatibility & Multi-Device Support】Compatible with Windows 7 8 10 11, macOS, Linux,Android and supports most popular software such as OBS, Zoom, VLC, Twitch Studio, and more. Works seamlessly with PS4, PS5, Xbox, Switch, DSLR cameras, TV boxes, and other HDMI-output devices for streaming to YouTube, Twitch, etc.
- 【What You Get】Includes: HDMI Capture Card, USB 3.0 to USB-C Adapter, User Manual. Tips: Make sure your tablet’s OTG function is enabled before connecting. Test your HDMI device with a monitor first to confirm video and audio output, then connect to the Video Capture Card for recording.
Check the stream key only when the stream will not start
A YouTube stream key tells the encoder where to send its feed. YouTube advises replacing the key in the encoder if a third-party encoder reports an error when starting the stream. YouTube’s auto-start and auto-stop settings govern whether a live feed can be started or stopped from the encoder. Neither setting controls whether an OBS Media Source repeats a local video.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Or let it run in the cloud
If your goal is to keep uploaded videos playing on a YouTube channel without leaving a church computer on, StreamNeo is an alternative to operating OBS locally. It plays uploaded videos, not a live camera feed.
Rank #4
- High-Quality Video Capture, 4K HDMI Capture Card Ready: Capture smooth and vibrant video with this 4K HDMI capture card, engineered for gamers and content creators who demand crisp 1080P 60FPS video quality. Whether you're streaming to Twitch or recording gameplay for YouTube, your footage will look professional and detailed
- Plug-and-Play USB Capture Card, No Drivers Needed: Designed as a USB capture card for streaming, this device works instantly out of the box, just plug into your PC or laptop and start capturing. Fully compatible with popular software like OBS Studio, Streamlabs, and XSplit, making setup quick and stress-free for beginners and pros alike
- Universal Compatibility PS5, Xbox, Switch & More: Stream or record gameplay from virtually any HDMI-enabled device including Nintendo Switch, PS5, Xbox Series X, DSLR cameras, and PCs. The video capture card for gaming supports seamless passthrough so you can play without lag while your audience watches every frame in real time
- Low-Latency Performance for Smooth Streaming: This capture card for streaming minimizes delay between gameplay and broadcast, so you get reliable, low-latency capture that works well for competitive gaming, live broadcasts, and podcast sessions. Suitable for those building their channel with high-quality, engaging content
- Compact & Portable Design for Content Creators: Lightweight and portable, this USB 3.0 capture card works well for creators who travel or switch gaming setups often. Throw it in your bag and stream or record wherever you are, at home, events, LAN parties, streaming or studio sessions
- Upload a recording or build a playlist.
- Add your YouTube stream key once.
- Go live; StreamNeo loops the video from the cloud.
Nothing has to stay on at home. Videos stream as uploaded, up to 4K 60fps, at one price per slot; StreamNeo does not re-encode them or use quality tiers. It automatically recovers if YouTube drops the stream. The first day is free with no card required. Monthly billing is $9.99 per month. Start your free day with StreamNeo.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
