A blower-cooled GeForce RTX 5090 has surfaced in reports, but the April 2025 sighting was described as an apparent modified RTX 5090D—not a confirmed NVIDIA retail model. Its two-slot, rear-exhaust design could suit tightly packed multi-GPU systems. The card’s exact power draw, performance, noise and current availability have not been verified.
What is a blower-style RTX 5090?
A blower-style graphics card draws air through its cooler and pushes heated air out through the rear of the computer case. That differs from the open-air coolers common on gaming cards, which generally move heat into the surrounding case.
HotHardware reported on April 18, 2025, that an apparent modified GeForce RTX 5090D had appeared in a video. The reported card had a two-slot profile, rear exhaust and a power connector at the rear of the card. HotHardware’s account traced the sighting through VideoCardz to a UNIKO’s Hardware post about a Bilibili video; the identification should be treated as that report’s interpretation, not as independent confirmation of a production model. HotHardware’s report
Is the RTX 5090 blower cooler official?
The original sighting did not establish that NVIDIA or a board partner had launched an official retail blower RTX 5090. Later reports describe other unofficial conversions and separate product appearances, but they do not verify the origin of the card in the April video.
#1 Best Overall
- The base plate is made of T2 purple copper, with a high thermal conductivity of 401W/m.k, which enhances heat conduction performance and increases the heat dissipation area.
- The 0.3MM jet-type micro features 56 water channels, increasing the heat absorption area and delivering powerful heat dissipation performance.
- The matte texture process backplate is made of high-quality aluminum material and is installed in an upper and lower interlayer style, providing all-round protection.
- The full-coverage steel plate is extended to 136.55MM, increasing the water flow coverage area. Reducing the weight of the GPU BLOCK, protecting the PCB from deformation, and combining with the electroless nickel plating surface treatment process, the thermal resistance of the 0.001-0.002MM coating thickness is almost zero, while more effectively preventing corrosion and erosion.
- Designed with a 9.5MM copper plate, it uses sufficient materials and adopts a single-layer sealing ring design to effectively reduce the risk of leakage.
Later reports and listings
- In May 2025, VideoCardz reported blower-style RTX 5090 cards in China and described unofficial conversions using components from existing cards on redesigned boards. VideoCardz, May 2025
- In August 2025, VideoCardz reported a retailer listing for an AFOX RTX 5090 blower card and said AFOX’s status as an NVIDIA board partner was unclear. Tom’s Hardware later reported a US retailer listing for an AFOX GeForce RTX 5090 32GB Professional at $5,999. These were dated listings, not confirmation of current stock or Amazon availability. VideoCardz listing report Tom’s Hardware listing report
- In January 2026, VideoCardz described China-market listings for blower conversions across several RTX 50-series models, characterizing them as non-official designs intended to fit more GPUs into a chassis. Prices in that dated report should not be read as current prices. VideoCardz, January 2026
- VideoCardz later reported that PELADN showed a dual-slot blower-cooled RTX 5090 at Computex 2026. A trade-show appearance demonstrates the concept’s continued presence, not broad retail availability. VideoCardz, Computex 2026
Why would an AI server use a blower GPU?
In a workstation or server with several graphics cards installed close together, a narrow card that exhausts heat out of the back can help direct hot air out of a crowded chassis. The two-slot layout may also make it easier to fit more cards than with wider open-air coolers. This is a system-layout advantage, not evidence that a blower card is quieter, faster or better for a typical gaming PC.
There are trade-offs to check before building around one: actual slot occupancy, chassis airflow, the card’s power connector position, and measurements of temperature and noise at a known power limit. The cited reports do not provide a controlled blower-versus-open-air RTX 5090 comparison, so they do not establish an acoustic or performance winner.
Rank #2
- OPTIMIZED FOR CONTINUOUS USE: Designed specifically for sustained performance in demanding environments.
- SUPERIOR BUILD MATERIALS: Features a combination of NICKEL ELECTROPLATED HIGH PURITY COPPER, STAINLESS STEEL, and POM for enhanced durability.
- ULTRA-SLIM PROFILE: The stainless steel panel design ensures a sleek, LOW-PROFILE FIT for your GPU setup. Engineered to support MULTIPLE BLOCKS IN SERIES, maximizing cooling efficiency.
- COMPATIBILITY: EXCLUSIVELY DESIGNED for NVIDIA GeForce RTX 5090 32G D7 Turbo V1 and NVIDIA GeForce RTX 5090 32G Blower, ensuring a perfect fit and optimal performance. Comes complete with MOUNTING HARDWARE and THERMAL GREASE for straightforward setup.
- USA SUPPORT FRIENDLY AND EXPERIENCED: Tyler Direct provides friendly and knowledgeable customer support in the USA, assisting with troubleshooting and compatibility issues. You'll benefit from a comprehensive 1-year warranty covering defects.
How much power does a blower RTX 5090 use?
The original report did not establish the modified card’s power draw. As its author put it, “It’s not clear how much power is on tap.” Do not assume the reference RTX 5090’s figures apply to that modified unit.
NVIDIA lists the reference GeForce RTX 5090 configuration with 575 W total graphics power and a 1,000 W required system power supply. These are NVIDIA’s product-page specifications, retrieved in 2026; NVIDIA cautions that specifications can vary by add-in-card manufacturer. They describe the reference product, not a measurement or confirmed setting for the pictured modification. NVIDIA GeForce RTX 5090 specifications
Recommended Free Tools
Rank #3
- This bundle includes the Alphacool Core Geforce RTX 5090 Suprim + Vanguard GPU Water Block and Thermal Grizzly KryoSheet Thermal Pad (44 x 37mm)
- Part of the Core product series, these coolers combine the highest quality with exceptional performance
- The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance
- Graphene thermal pads can be used as an excellent alternative for thermal compounds
- Contains no liquid components and is therefore not subject to the usual aging that is the case with traditional thermal grease
What is confirmed—and what remains unknown?
NVIDIA’s reference RTX 5090 specification page lists 21,760 CUDA cores, 32 GB of GDDR7 memory on a 512-bit interface, a 2.41 GHz boost clock, 575 W total graphics power and 1,000 W required system power. Those figures provide product-family context only; they do not establish the specifications of the modified card.
For the original blower-style sighting, the cited reporting does not verify board provenance, exact power draw, temperatures, noise, gaming or AI performance, warranty, or current availability. A dated listing or trade-show appearance is not proof that the pictured design is currently available to buy. Anyone evaluating a listing should confirm the exact model and cooler, seller provenance, warranty terms, board power and chassis compatibility rather than relying on a standard RTX 5090 product page.
Quick Recap
Best Value
- Fan Dimension (LxWxH): approx. 3.6 x 3.6 x 0.6 inches
- Mounting holes distance: approx. 1.6*1.6*1.6 inches
- Power Connector: 4-Pin Header
- Manufacturer Part Number: Compatible with RTX 3060 3070 3080 3090 /RX 6800 6900
- You will receive a NEW Fan For Graphics Card Video Card as pictured.
Rank #4
- High Airflow PCI Slot Cooling Fan: Our compact blower fan is designed to fit into a standard PCI slot, providing targeted cooling for expansion cards like video cards to avoid overheating and enhance system stability
- Dual Power Connector Design: Features a large 4-pin connector with dual plugs, allowing you to connect directly to the chassis power without occupying additional limited power interfaces for a clean and effortless setup
- High Static Pressure Performance: Engineered for high static pressure, this fan efficiently pushes air through tight spaces and heatsinks, delivering excellent thermal performance for your key components
- Quiet Run at 20 Decibels: Operates at a low noise level of only 20 decibels, ensuring effective cooling without disrupting your work or the serenity of your work space
- Complete Package for Easy Installation: You will receive 1pc 4.37 x 3.54 x 0.82 inch cooling fan ready for installation, with a wire length of 18 centimeters for flexible routing within your computer case
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
