It cannot be confirmed from “RX 580” alone. RX 580 cards come in different lengths, heights and thicknesses, so you need the exact graphics-card model and your case’s available GPU clearance before you can say whether it will fit without problems.
Why the RX 580 name is not enough
“Radeon RX 580” identifies a GPU family, not one standard-size board. For example, MSI lists these two RX 580 cards at substantially different sizes:
| Card | Length | Height | Thickness |
|---|---|---|---|
| MSI Radeon RX 580 GAMING 8G | 276 mm | 140 mm | 42 mm |
| MSI Radeon RX 580 8G | 243 mm | 111 mm | 40 mm |
A case that accepts a 243 mm card may not have room for a 276 mm version. Cooler shrouds, backplates and slot thickness also affect clearance.
How to verify the exact graphics-card size
- Identify the manufacturer and full model. Read the sticker on the card or identify it through its hardware ID. AMD explains the process in How To Identify the Manufacturer and Model of an AMD Graphics Card.
- Open the manufacturer’s specification page. Record the card’s length, height and thickness or slot count. Do not substitute dimensions from another RX 580 variant.
- Include attached hardware. Measure the complete card, including its cooler and backplate, rather than only the circuit board.
Compare the card with your case
Find the case manufacturer’s maximum GPU length, usually listed in millimetres. Compare that figure with the exact card length, then inspect the installation path:
#1 Best Overall
- Comes with 4x pre-installed PWM-controlled 120mm ARGB fans, ensuring adaptable airflow and vibrant lighting with daisy-chain connectivity for easy setup.
- Integrated 26-LED ARGB strip offers full spectrum color control and synchronization with motherboard software, enhancing both visibility and aesthetics.
- Supports ATX, Micro-ATX, Mini-ITX, and back-connect ATX or Micro-ATX motherboards for cleaner routing and flexible builds
- Each side panel features a tool-less mounting mechanism for easy and fast access to internal components, streamlining your build process.
- Fits high-end hardware with support for GPUs up to 420mm, CPU coolers up to 178mm, and a top radiator up to 360mm
- Remove or account for front drive cages, radiator assemblies and front fans that reduce usable length.
- Check the case’s GPU height allowance against the card’s height, especially if the side panel is close to the PCIe area.
- Check the card’s slot thickness. A two-and-a-half- or three-slot cooler can cover neighbouring expansion slots even when its length fits.
- Confirm that the motherboard’s primary PCIe x16 slot is positioned where the case opening and support brackets line up.
If you cannot find a published clearance figure, measure the unobstructed space from the rear expansion-slot opening to the nearest obstruction and compare it with the card’s complete dimensions. Without both the exact card model and the case clearance, physical compatibility remains unresolved.
Check power separately from physical clearance
A card can fit mechanically and still fail to operate if the power supply is unsuitable. AMD lists 185 W typical desktop board power for the RX 580 on its Radeon RX 580 support page.
Rank #2
- Ample Interior: Explore ample interior space for Micro-ATX or Mini-ITX motherboards, ensuring easy and future expansion
- Components Clearance: Accommodates CPU coolers with a max height of 159mm, GPU cards up to 360mm, and PSU up to 160mm in length.
- Versatile Cooling: Maximize cooling performance with a 240mm liquid cooler and 5 fans.
- Modular I/O Panel: You have the flexibility to adjust its position at the front, top, or bottom on both sides
- Edge-To-Edge Panel: Show off your meticulous build through the transparent side panel with pride.
Power requirements vary by board design. The MSI RX 580 8G specifications cited above list one 8-pin power connector and a 500 W recommended power supply for those models. Verify the connector and PSU recommendation for your exact card, and make sure your PSU has the required native PCIe cable. Do not rely on the RX 580 family name to determine either requirement.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Information needed for a definite yes or no
- The graphics card’s manufacturer and complete model number.
- Its published length, height and thickness or slot count.
- Your case model, or measured GPU clearance after accounting for cages, fans and radiators.
- The card’s PCIe power connector and the PSU’s capacity and available connector.
Provide those details and the fit can be checked directly. A generic “RX 580” listing or a case description without a clearance measurement is not enough to guarantee a problem-free installation.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Quick Recap
Best Value
- EXCEPTIONAL GPU COOLING-The PSU shroud is perforated on the side and bottom, enabling optimal air intake from two 120mm fans (not included).
- LARGE RADIATOR SUPPORT-Supports up to a 360mm radiator in front and a 240mm radiator up top for powerful liquid cooling potential.
- HIGH-PERFORMANCE AIRFLOW-Ultra-fine mesh on the top, front, and side panels creates maximum airflow and filters dust.
- PRE-INSTALLED FANS-Equipped with two 120mm Quiet Airflow fans—one in front, one in rear—for solid out-of-the-box performance.
- SEAMLESS CABLE MANAGEMENT-Effortlessly route and conceal cables using the wide channels, hooks, and straps.
Rank #4
- 【MUSETEX presents the K2 gaming pc case】both a visual experience and a first-class installation experience,high configuration,high cost performance. Equipped with 7 pre-installed PWM ARGB fans and expandable to 10 total, it delivers exceptional cooling power to keep high-end hardware chilled during intense sessions. Featuring a 270° panoramic dual tempered glass design offering wider field of view than most similar cases, can display users' high-end and cool PC hardware and beloved dolls, and will gain friends' cool admiration
- 【Tower Case Powerful Space Layout】The internal structure of the MUSETEX ATX chassis is clearly partitioned, with each installation space thoughtfully arranged. It is compatible with most common hardware components on the market, supporting GPUs up to 400 mm (15.7") in length, CPU coolers up to 165 mm (6.5") in height, and top-mounted liquid coolers up to 360 mm (14.2"). It supports power supply units up to 140 mm (5.5") in length when the hard drive cage is installed, and up to 150–180 mm (5.9–7.1") in length without the hard drive cage
- 【Upgrade High Speed IO Panel】1 x Type-C, 2 x USB 3.0, Microphone & Audio, Power Button, Restart Button
- 【Good heat dissipation/cool effects all want】MUSETEX pre-installs 7 adjustable speed ARGB fans in the tower case for lighting enthusiasts. Through motherboard software control, you can customize various light modes and adjust fan speeds for colorful, dazzling lights with optimized cooling performance
- 【High-performance adjustable-speed cooling ARGB fan】Dimensions: 120*120*25mm; Fan speed: 600-1300±10% RPM; Max airflow: 24.72CFM; Max static pressure: 0.45mm H2O; Noise level: 20.819dB(A); Bearing: hydraulic bearing
Rank #3
- FRAME Modular Case System – The revolutionary FRAME system gives new meaning to the word customization. Want to upgrade the motherboard tray to billet aluminum? Want to swap out your front I/O panel for more USB ports? Now you can. A case that can change and grow with your needs (or just your mood). The options are nearly limitless
- 3x CORSAIR RS ARGB PWM Fans – High-performance fans pre-installed in the front of case. Support daisy-chainable 4-pin PWM connections and Zero RPM mode for near-silent operation at low loads. Each Fan has eight LEDs and easily controllable with your motherboard’s +5V ARGB connector
- CORSAIR InfiniRail Fan Mounting System – This steel multi-point mounting system offers unmatched flexibility in front and roof fan configuration. Simply slide the rail to mount fans up to 200mm (140mm in the roof) wherever you like, ensuring targeted airflow
- Clean Lines or Turbo Cooled – The internal side panel near the motherboard tray can be used as a cable cover for clean cable management, or you can remove it and mount fans to the side for increased cooling potential
- 3D Y-Pattern Airflow Panel – Optimized for high airflow and minimal restriction, the steel front panel is perforated in three dimensions with a Y-pattern that provides a low-obstruction path for cool air
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
