Windows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallOutdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchiTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
Short answer: OBS’s Fade transition fades between scenes; OBS’s documented VLC Video playlist controls do not establish a setting for fading audio between consecutive videos inside one playlist. For an ordered sequence, use a VLC Video source, leave Shuffle Playlist off, and verify the program audio with a recording or private test stream before going live.
Set up an ordered playlist in OBS
- Install VLC. OBS’s official Media Sources guide says the VLC Video source requires VLC to be installed; 64-bit OBS requires 64-bit VLC.
- Add the playlist source. In OBS, add a VLC Video source and populate its playlist with the local media files you want played.
- Choose playback order and repeat behavior. Leave Shuffle Playlist off to play videos in the listed order. Enable or disable Loop Playlist depending on whether playback should restart after the final item.
- Check visibility behavior. The VLC source settings include behavior for when the source is hidden. The documented default is to stop playback while not visible and restart when visible. If scenes hide and reveal the source, account for that behavior in your sequence.
- Review other source settings as needed. The VLC source also has options including network caching and audio-track selection. These do not establish an audio crossfade between playlist items.
Scene Fade is not a playlist-item audio fade
OBS documents Fade and Cut as scene transitions, with a configurable transition duration in its OBS Overview Guide. That is a transition between scenes. The documentation does not say that choosing Fade applies an audio fade at every boundary between videos in one VLC playlist.
Keep the two cases separate:
- Changing scenes: a scene transition such as Fade controls the transition between scenes.
- Advancing within one VLC playlist: the playlist advances from one media item to the next; the reviewed VLC source documentation does not establish a configurable per-item audio crossfade.
OBS’s Filters Guide lists audio filters such as Gain, Compressor, Expander, Limiter, Noise Gate, Noise Suppression, and VST 2.x. It does not identify a built-in control for crossfading audio at each playlist-item boundary. A filter can process audio, but its presence alone is not evidence that it will create the requested transition between playlist files.
Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Repair Windows errors before they cause bigger problems3Scan for outdated or missing drivers - takes under a minuteMonitor and verify what viewers will hear
- Use the OBS audio mixer and configured monitoring device to listen to the source and check its level. The Audio Mixer Guide explains monitoring and checking audio through the signal path.
- Do not treat local monitoring as proof that the audience receives the same final mix. Make an OBS recording or run a private test stream and listen to the output, especially at the point where one playlist item ends and the next begins.
- If you need a precise click-by-click instruction for a per-item fade, first check the installed OBS version and test the actual source and transition behavior. The reviewed official documentation does not establish that such a control exists.
If you meant a fade between scenes
If each video is in a different scene and your goal is to fade as OBS changes scenes, use the scene transition controls and set the transition duration there. Confirm the visual and audio result in a recording or private test stream. That workflow is different from applying an audio fade between items within one VLC playlist.
#1 Best Overall
- Pro performance with great pre-amps - Achieve a brighter recording thanks to the high performing mic pre-amps of the Scarlett 3rd Gen. A switchable Air mode will add extra clarity to your acoustic instruments when recording with your Solo 3rd Gen
- Get the perfect guitar and vocal take with - With two high-headroom instrument inputs to plug in your guitar or bass so that they shine through. Capture your voice and instruments without any unwanted clipping or distortion thanks to our Gain Halos
- Studio quality recording for your music & podcasts - Achieve pro sounding recordings with Scarlett 3rd Gen’s high-performance converters enabling you to record and mix at up to 24-bit/192kHz. Your recordings will retain all of their sonic qualities
- Low-noise for crystal clear listening - 2 low-noise balanced outputs provide clean audio playback with 3rd Gen. Hear all the nuances of your tracks or music from Spotify, Apple & Amazon Music. Plug-in headphones for private listening in high-fidelity
- Everything in the box: Includes Pro Tools Intro+, Ableton Live Lite, Cubase LE, and Hitmaker Expansion: a suite of essential effects, powerful software instruments, and easy-to-use mastering tools
A community discussion describes audio fade-style choices for Stinger transitions, including fading out to the transition point and fading in, or crossfading. Treat that as community guidance, not proof of a VLC playlist feature; inspect the transition properties in your installed OBS version and test the intended output.
Troubleshooting playlist boundaries
- The videos play in an unexpected order: check that Shuffle Playlist is off and that the playlist is arranged as intended.
- The playlist stops after the last video: check whether Loop Playlist is enabled.
- Playback stops or restarts after a scene change: inspect the VLC source’s visibility behavior; its documented default is to stop when hidden and restart when visible.
- You hear audio locally but are unsure what viewers hear: confirm the final program output with an OBS recording or private test stream rather than relying only on monitoring.
- You cannot find a playlist crossfade setting: the reviewed official playlist documentation does not establish a built-in per-item audio crossfade control. Do not assume the scene Fade setting applies to playlist boundaries.
Or let it run in the cloud
If the goal is a continuous YouTube stream made from uploaded videos, StreamNeo is an alternative to leaving OBS running on a home computer: upload a recording or build a playlist, add your YouTube stream key once, and go live. It loops uploaded videos from the cloud; it does not go live from a camera.
Rank #2
- The new generation of the songwriter's interface: Plug in your mic and guitar and let Scarlett Solo 4th Gen bring big studio sound to wherever you make music
- Studio-quality sound: With a huge 120dB dynamic range, the newest generation of Scarlett uses the same converters as Focusrite’s flagship interfaces, found in the world's biggest studios
- Find your signature sound: Scarlett 4th Gen's improved Air mode lifts vocals and guitars to the front of the mix, adding musical presence and rich harmonic drive to your recordings
- All you need to record, mix and master your music: Includes industry-leading recording software and a full collection of record-making plugins
- Everything in the box: Includes Pro Tools Intro+, Ableton Live Lite, Cubase LE, and Hitmaker Expansion: a suite of essential effects, powerful software instruments, and easy-to-use mastering tools
- Nothing has to stay on at home for the cloud stream to continue.
- Any quality up to 4K 60fps streams as uploaded at one flat price per slot, without re-encoding or quality tiers.
- Automatic recovery is included if YouTube drops the stream.
- The first day is free with no card, one free day per account.
Monthly: $9.99 per month. See StreamNeo for details, or start the free day.
Quick wins for a faster PC:
Repair Windows errors before they cause bigger problemsFix Now →Scan for outdated or missing drivers - takes under a minuteDriver Scan →Quick Recap
Best Value
- The new generation of the artist's interface: Connect your mic to Scarlett's 4th Gen mic pres. Plug in your guitar. Fire up the included software. Start making your first big hit
- Studio-quality sound: With a huge 120dB dynamic range, the newest generation of Scarlett uses the same converters as Focusrite’s flagship interfaces, found in the world's biggest studios
- Never lose a great take: Scarlett 4th Gen's Auto Gain sets the perfect level for your mic or guitar, and Clip Safe prevents clipping, so you can focus on the music
- Find your signature sound: Air mode lifts vocals and guitars to the front of the mix, adding musical presence and rich harmonic drive to your recordings
- With Scarlett 4th Gen, you have all you need to record, mix and master your music: Includes industry-leading recording software and a full collection of record-making plugins
Rank #4
- Podcast, Record, Live Stream, This Portable Audio Interface Covers it All - USB sound card for Mac or PC delivers 48kHz audio resolution for pristine recording every time
- Be ready for anything with this versatile M-AUDIO interface - Record guitar, vocals or line input signals with two combo XLR / Line / Instrument Inputs with phantom power
- Everything you Demand from an Audio Interface for Fuss-Free Monitoring - 1/4" headphone output and stereo 1/4" outputs for total monitoring flexibility; USB/Direct switch for zero latency monitoring
- Get the best out of your Microphones - M-Track Duo’s transparent Crystal Preamps guarantee optimal sound from all your microphones including condenser mics
- The MPC Production Experience - Includes MPC Beats Software complete with the essential production tools from Akai Professional
Rank #3
- PLUG IN AND HEAR SOUND IN SECONDS - USB Type-A connector with a 3.5mm stereo headphone output and a separate 3.5mm mono microphone input. No drivers, no software, no external power - the adapter is USB bus-powered and is recognized as a standard USB audio device.
- WORKS ON WINDOWS, MAC AND LINUX - Driverless on Windows 98SE/ME/2000/XP/Server 2003/Vista/7/8, Linux and Mac OSX, and compliant with the USB Audio Device Class 1.0 specification, so any system that supports class-compliant USB audio will see it. Select it as the sound output and input device after plugging it in.
- TWO JACKS, TWO JOBS - The green jack is stereo OUT for headphones or powered speakers; the pink jack is mono microphone IN for a 3.5mm mic. It does NOT support 4-pole headsets on a single combo plug, it does NOT power passive speakers, and it does NOT add surround sound - it is a stereo 2-channel adapter.
- FOR LAPTOPS AND DESKTOPS THAT NEED AN AUDIO PORT BACK - Adds a headphone and mic port to a laptop, desktop, or mini PC whose onboard jack has failed or was never there. Managed and work-issued computers can block new USB audio devices by policy - check with your IT department before ordering for a company machine.
- SABRENT SUPPORT AND WARRANTY - What is in the box: one USB audio sound adapter. Backed by a 1-year limited warranty, extended to 2 years when you register within 90 days on the manufacturer's website.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
