Short answer: a Linksys LNE100TX can be used with Symantec Ghost only when the Ghost boot environment has a network driver or template that supports the exact card revision. The available documentation explains how to add a DOS network driver, but it does not establish universal support for every LNE100TX revision, Ghost release, or target computer. Treat this as a legacy-hardware project, not a guaranteed plug-and-play setup.
What the LNE100TX is—and why that matters
The LNE100TX is Linksys’ legacy EtherFast 10/100 LAN Card, a PCI adapter designed for period desktop hardware. The Linksys user guide describes a 32-bit PCI 2.1 card that should be installed in a PCI slot supporting bus mastering. Those requirements describe the card’s historical platform; they are not a promise that the adapter will work in a modern motherboard, BIOS, or operating system.
Identify the label, hardware revision (for example, a v5 marking), and the target computer before building media. Different revisions can use different controller chips and therefore require different drivers.
What Ghost actually needs
Ghost does not recognize every network adapter automatically. A network boot package must load a driver that can initialize the NIC and provide network access to the Ghost session. The Symantec Ghost Implementation Guide says to select a network-driver template suitable for the NIC in the client computers. If no suitable template exists, obtain the card’s DOS driver and add it as a template in Ghost Boot Wizard.
Quick wins for a faster PC:
Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Repair Windows errors before they cause bigger problemsFix Now →Scan for outdated or missing drivers - takes under a minuteDriver Scan →#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
That workflow is documented; a confirmed LNE100TX template for every Ghost version is not. Therefore, “the LNE100TX works with Ghost” is too broad a claim. Compatibility depends on all of these variables:
- the exact LNE100TX hardware revision and chipset;
- the Ghost release and Ghost Boot Wizard version;
- whether the media uses a DOS NDIS2 driver, a packet driver, or PXE/UNDI;
- the target machine’s PCI implementation, BIOS, and available bus-mastering support; and
- the network boot server and protocol used by the imaging environment.
Choose the boot method first
| Boot route | What it uses | What must be verified | Typical limitation |
|---|---|---|---|
| Ghost DOS boot disk or ISO | A card-specific DOS NDIS2 or packet driver loaded at boot | A driver matching the exact LNE100TX revision and Ghost template format | Requires locating an authentic legacy driver and configuring DOS startup files correctly |
| Ghost Solution Suite PXE/universal package | PXE network boot and, where applicable, the NIC’s UNDI implementation | NIC option ROM, BIOS PXE settings, and a server configured for the package | Not the same as loading an LNE100TX DOS driver; older cards or BIOSes may lack usable PXE support |
| Non-network Ghost media | Local storage such as CD, USB, or another attached disk | Whether the Ghost build and target machine support that media | Avoids NIC-driver setup but cannot image over the network without a separate transport |
Broadcom’s Ghost Solution Suite guidance treats universal PXE boot and UNDI as a distinct path. UNDI depends on the NIC option ROM and the relevant BIOS options being enabled, so do not assume that a successful DOS-driver setup proves PXE compatibility, or vice versa.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
How to add an LNE100TX driver in Ghost Boot Wizard
The exact labels vary by Ghost release, but the documented process is:
- Confirm the environment. Record the Ghost version, boot method, LNE100TX revision, target computer model, and whether the network uses PXE or a DOS disk.
- Obtain the correct DOS driver. Use the driver supplied for the exact card revision when possible. Linksys lists the LNE100TX as end of support; its US listing gives 2 August 2022 as the end-of-support date. Archived files should be checked for revision, provenance, and malware before use. Current documentation does not establish a verified downloadable driver file.
- Open Ghost Boot Wizard. Start the wizard included with the Ghost installation and choose the network-boot or network-disk option appropriate to your media.
- Select an existing template only if it matches. Do not choose a generic template merely because it mentions 10/100 Ethernet. The controller and driver type must correspond to the installed LNE100TX.
- Add a new template when no match exists. Use the wizard’s option to add a network driver, provide the DOS NDIS2 or packet-driver files, and enter the required driver filename and configuration parameters. Follow the driver’s own readme for interrupt, I/O, and protocol settings rather than guessing.
- Build the media and test it on the intended machine. Confirm that DOS loads the driver without an error, obtains or accepts the expected network configuration, and can reach the Ghost server or image share before attempting a restore.
Hardware checks before troubleshooting Ghost
- Install the adapter in a 32-bit PCI slot that supports bus mastering, as specified by the historical Linksys guide.
- Check BIOS settings for enabled PCI devices, resource assignments, and (for PXE) network or boot-ROM support.
- Use a known-good 10/100 cable, switch port, and link indicator.
- Record any controller-chip marking in addition to the Linksys model and revision.
- Test the card in the same machine that will run Ghost; success in another computer does not prove compatibility.
Common failure symptoms and what they mean
Ghost Boot Wizard has no suitable template
This means the installed Ghost package does not include a recognized template, not that the card is definitively incompatible. Locate a matching DOS driver and add it manually, or use a different boot route.
Recommended Free Tools
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
DOS reports that the driver cannot load
Recheck the revision-specific driver, file paths, memory managers, and hardware-resource settings. A driver for a different LNE100TX revision may load incorrectly or not at all.
The driver loads but Ghost cannot find the server
Separate driver initialization from network configuration. Check the protocol parameters, IP or DHCP behavior, cable and switch link, and server-side share permissions. A loaded driver alone does not prove end-to-end connectivity.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
PXE boot does not start
Verify that the machine firmware and NIC option ROM expose PXE/UNDI and that BIOS network-boot options are enabled. PXE failure cannot be repaired by adding a DOS NDIS2 template to a floppy or ISO.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Support status and practical expectations
Linksys marks the LNE100TX and regional variants as end-of-support. Its general driver guidance warns that end-of-life products may receive no further updates. A used card is therefore reasonable only when restoring a period-compatible PCI computer and when its revision and driver can be verified. It is not a current-networking recommendation, and no documented compatibility percentage or universal Ghost support matrix is available.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Quick Recap
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
What to verify before declaring success
- The card revision and controller identity match the driver files.
- The host has a compatible 32-bit, bus-mastering PCI slot.
- The Ghost release accepts the selected driver/template format.
- The chosen boot path is explicitly supported by the machine firmware.
- The completed media can initialize the NIC and communicate with the Ghost server in a test run.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
