To make one sleep video play again automatically in OBS, add it to a scene as a Media Source, open its Properties, and enable Loop. The separate Restart playback when source becomes active option resets playback when the source becomes active; it does not replace looping.
Loop one sleep video in OBS
- In your OBS scene, add the video as a Media Source.
- Select the source and open Properties.
- Turn on Loop. OBS will play the file again when playback completes.
- Optionally turn on Restart playback when source becomes active if you want the video to begin at the start whenever that source becomes visible or active.
- Choose whether to enable Show nothing when playback ends based on what should appear if playback does end. This setting controls the display after the file ends; it does not make the video repeat.
The Media Source is documented for Windows, macOS, and Linux. OBS lists MP4, TS, MOV, FLV, MKV, AVI, GIF, and WebM as supported video formats, but a listed extension does not guarantee that every codec or damaged file will play correctly. OBS Media Sources guide
Choose the right playback behavior
| What you want | OBS setting or source | What it does |
|---|---|---|
| Repeat one video continuously | Media Source: Loop | Starts the file again when playback completes. |
| Start from the beginning when the source becomes active | Media Source: Restart playback when source becomes active | Resets playback on source activation; it is not a substitute for Loop. |
| Hide the source after playback ends | Media Source: Show nothing when playback ends | Changes what OBS displays after the file ends; it does not replay the file. |
| Cycle through a playlist | VLC Video source: Loop Playlist | Restarts the playlist when it runs out of media files. VLC must be installed for this source to be available. |
For a single sleep video, the built-in Media Source and its Loop control are the simpler route. For several files, use VLC Video and its playlist controls. OBS Media Sources guide
Troubleshoot a video that stops or disappears
The video plays once and stops
- Open Properties for the actual Media Source in the scene and verify that Loop is enabled.
- Do not rely on Restart playback when source becomes active to replay a file continuously; that option applies when the source becomes active.
The preview goes blank or holds on the last frame
Check Show nothing when playback ends. It determines whether OBS hides the source after playback ends or leaves the last frame visible; it does not control looping. If the source is supposed to repeat, check Loop separately.
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Scan for outdated or missing drivers - takes under a minute3Clear out junk files and repair common Windows errors#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
A file will not play as expected
OBS lists several supported file formats, but the extension alone does not confirm that the file’s codec is compatible or that the file is intact. Try a known-good file in a listed format to help distinguish a playback-file problem from a source-setting problem. OBS Media Sources guide
An automation script hides and quickly re-shows the source
A timing edge case has been reported for automation that changes source visibility after a playback-ended event. In that specific scenario, the OBS issue discussion recommends waiting at least 60 frames after the event before changing visibility. This is a workaround for the reported automation case, not a requirement for ordinary Media Source looping. OBS issue #11040
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Or let it run in the cloud
OBS looping is a local setup: the computer running OBS and its connection need to remain available for the stream. If your goal is a 24/7 YouTube stream from uploaded sleep videos, StreamNeo runs the loop in the cloud, so nothing has to stay on at home. Upload your recording or build a playlist, add your YouTube stream key, and go live.
Quick Recap
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
- Videos stream as uploaded, up to 4K 60fps, at one flat price per slot.
- StreamNeo automatically recovers if YouTube drops the stream.
- The first day is free, with no card required.
Monthly: $9.99 per month.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
The Tool Desk
Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →
