Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Clear out junk files and repair common Windows errors3Fix the driver behind crashes, sound loss and screen glitchesYou can install Restreamer with Docker and configure it to publish to YouTube, but the available official documentation does not confirm a built-in way to loop a local video file indefinitely. The steps below cover the supported Docker setup and YouTube publication; they do not claim that a continuous publication automatically restarts its video at the end.
What you need before installing
- A Docker-capable host. The official Linux installation guide specifies a 64-bit Intel or AMD CPU and a current Linux distribution. See datarhei’s Linux installation requirements.
- A network configuration that allows the services you intend to use to reach the host. The official Quick Start says public port forwarding is needed for full functionality; which ports must be reachable depends on your setup.
- A valid YouTube streaming ID and an active YouTube account for the destination.
- Host storage for Restreamer’s configuration and internal data, as in the official example.
Install the official Restreamer Docker image
On the Docker host, run datarhei’s Quick Start command:
docker run -d --restart=always --rm --name restreamer
-v /opt/restreamer/config:/core/config
-v /opt/restreamer/data:/core/data
-p 8080:8080 -p 8181:8181
-p 1935:1935 -p 1936:1936
-p 6000:6000/udp
datarhei/restreamer:latestThe bind mounts store configuration from /core/config and internal data from /core/data in the corresponding host directories. The example maps HTTP/HTTPS and RTMP/RTMPS ports, along with UDP 6000 for SRT-related traffic. Do not expose ports you do not need; configure host and network access for the services you will actually use. The full command and port details are in the official Quick Start.
The command uses the latest image tag shown in that example. It is a moving tag, not a pinned version, so a later pull may use a different image. For a reproducible deployment, choose and record an appropriate fixed image version using the project’s current guidance. The project recommends its official Docker images and describes this as its most tested installation method: official recommendations.
Free tools Windows power users keep installed
One-click scans. No signup required.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
Open the web interface and secure it
- After the container starts, open
http://<host-ip>:8080/uiin a browser on a network that can reach the host. Replace<host-ip>with the Docker host’s IP address. The documentation’s example useshttp://device-ip:8080/ui. - Complete the initial setup and choose a secure, unique password. Avoid reusing a password from another service, especially if the interface is reachable beyond your local network.
- If you need access from outside the local network, configure routing and firewall rules deliberately. The Quick Start notes that public port forwarding is needed for full functionality; do not treat every mapped port as automatically safe to expose.
Configure a YouTube publication
- In Restreamer, create a Publication Service and select YouTube. Restreamer’s guide describes this workflow in How can I use YouTube with the Restreamer?
- Enter a valid YouTube streaming ID for the stream you intend to publish to, then save the publication. Keep the ID private; anyone who obtains a stream key may be able to broadcast to its destination.
- Start the stream in Restreamer. When the connection is established, the bitrate appears in the main Restreamer window, according to the guide.
- For a source with no sound, Restreamer’s wizard recommends adding a silent audio channel and notes that some services, including YouTube, require an active audio channel. This is Restreamer’s guidance, not a complete statement of every current YouTube account or stream requirement. See the Restreamer wizard documentation.
Restreamer’s guide also warns: “Always end the stream on YouTube first after an event. If you interrupt the stream in the Restreamer during a live stream, YouTube may not save your live stream in the DVR archive.” To reduce that risk, end the event in YouTube before stopping the Restreamer publication.
Does this setup loop a local video file?
Not on the basis of the documented steps above. Restreamer’s official pages reviewed for this workflow describe Docker installation, YouTube publication, and source configuration, but they do not establish a built-in local-file repeat setting or provide its configuration syntax. The documented wizard lists network, hardware, Raspberry Pi camera, USB, SRT, and internal RTMP choices; that list does not verify a local media-file loop workflow. See the network source documentation.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
A YouTube publication staying connected is not proof that the media source will restart when it reaches the end. Do not assume a GUI toggle, environment variable, FFmpeg option, or Compose setting will enable looping unless current Restreamer documentation explicitly supports that exact method. If your requirement is to repeat a local recording continuously, confirm the supported source configuration for the Restreamer release you deploy before relying on it. This guide does not provide an unverified loop command.
Common setup problems
- The web interface does not load: confirm the container is running, use the Docker host’s reachable IP with port 8080 and the
/uipath, and check local firewall or routing rules. - The YouTube publication will not connect: verify that the selected service is YouTube, the streaming ID is valid, the YouTube destination is active, and the host can reach the required network services.
- External services cannot reach the host: check the relevant port mappings and network forwarding. The Quick Start’s example maps 8080, 8181, 1935, 1936, and UDP 6000, but your required exposure depends on the services you use.
- There is no audio: check whether the source provides an active audio channel. Restreamer recommends silent audio for a silent source because some services, including YouTube, require an active channel.
- The recording stops at its end: Docker installation and YouTube publication alone do not prove that local media repeats. Confirm a documented loop method for your exact Restreamer version rather than assuming the publication will restart the source.
- The YouTube archive is missing: if ending the stream matters for DVR retention, end the event on YouTube before stopping the Restreamer publication, as the vendor documentation advises.
Or let it run in the cloud
If your goal is simply to keep uploaded videos playing as a YouTube live stream, StreamNeo is an alternative that does not require a Docker host: upload a recording or build a playlist, add your YouTube stream key, and go live. The cloud keeps the stream running, so nothing has to stay on at home; it plays uploads rather than broadcasting a camera.
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
- Any uploaded quality up to 4K 60fps streams as made, with no re-encode and one flat price per slot.
- If YouTube drops the stream, StreamNeo automatically recovers.
- The first day is free with no card required; one free day is available per account.
Monthly: $9.99 per month. Start the free day with StreamNeo.
Quick Recap
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
