Free tools Windows power users keep installed
One-click scans. No signup required.
No—not at 10Gbps line rate. Raspberry Pi 5’s built-in Ethernet port is Gigabit Ethernet, and its documented USB and PCIe interfaces do not provide a supported 10Gbps path. You can investigate faster-than-gigabit adapters, especially 2.5GbE over USB, but that is different from achieving 10Gbps.
What Pi 5’s network connections support
| Connection | Documented Pi 5 specification | What it means for 10GbE |
|---|---|---|
| Built-in Ethernet | Gigabit Ethernet | The onboard port is not 10GbE. It provides the straightforward wired-network baseline. |
| USB Ethernet adapter | Two USB 3.0 ports support simultaneous 5Gbps operation; Raspberry Pi documentation recognizes USB-to-Ethernet adapters for adding wired connectivity. | USB 3.0’s specified rate is below 10Gbps. A faster-than-gigabit adapter may be worth investigating, but its driver support and actual throughput depend on the specific adapter and setup. |
| PCIe Ethernet card or HAT | PCIe Gen 2.0 x1. Raspberry Pi’s official magazine describes one PCIe 2.0 lane as 5Gbit/s before coding overhead, or 4Gbit/s capacity after overhead. | The documented host link is below 10Gbps, so a PCIe Ethernet device cannot use it to deliver 10Gbps line rate. |
| PCIe Gen 3 configuration | Can be enabled manually, but Pi 5 is not certified for Gen 3.0; Raspberry Pi warns connections may be unstable. | This is experimental, not a supported or guaranteed way to claim 10GbE performance. |
| Wi-Fi | Dual-band 802.11ac Wi-Fi | It is not a wired 10Gbps alternative. |
These are interface specifications, not measured end-to-end transfer speeds. Raspberry Pi has not established a benchmark for a named 10GbE adapter on Pi 5, so a theoretical link rate should not be presented as application throughput.
Can you get faster than the built-in gigabit port?
Possibly. A USB 2.5GbE adapter is a reasonable category to investigate if your goal is to exceed the built-in Gigabit Ethernet connection. Raspberry Pi’s documentation says USB-to-Ethernet adapters can add wired connectivity, and Pi 5’s USB 3.0 ports are specified for 5Gbps operation. Neither fact guarantees that a particular adapter will work or achieve a particular speed.
Before buying, check the adapter’s Linux driver support and compatibility with Raspberry Pi 5, along with connector and power requirements. Prefer a seller with a return policy in case the adapter does not work with your software or network. No specific 2.5GbE adapter model or measured result is established here.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
Would a PCIe adapter solve the 10GbE limit?
No. Pi 5 exposes PCIe Gen 2.0 x1. Raspberry Pi’s official magazine gives the capacity of a single PCIe 2.0 lane as 4Gbit/s after coding overhead, which is below the 10Gbps Ethernet line rate. A PCIe FPC adapter or HAT can connect a peripheral, but it does not change the bandwidth of the Pi’s documented host link.
Although Gen 3 can be enabled manually, Raspberry Pi says Pi 5 is not certified for that mode and that Gen 3 connections may be unstable. Treat it as experimental; it is not evidence of a supported, reliable 10Gbps setup.
Quick Recap
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Choose based on the speed you actually need
- For ordinary wired networking: use the built-in Gigabit Ethernet port.
- To explore speeds above gigabit: investigate a USB 2.5GbE adapter, checking its drivers and compatibility before purchase.
- For a true 10GbE link: Pi 5’s documented interfaces do not provide a supported 10Gbps host path. Choose hardware with a suitable 10GbE-capable interface instead.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
