iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
For smoother performance in Tainted Grail: The Fall of Avalon on PC, start with Low settings if your system is near the minimum requirements; otherwise begin with a middle preset. Keep your monitor’s native resolution as the baseline, then try FSR, reduce Grass Density if the GPU is struggling, and lower draw distance if the system is lower-end or CPU-bound. Change one option at a time and compare in the same area: official sources publish target specifications, but no setting-by-setting PC frame-rate gains.
What settings should you try first?
Patch 1.30, announced by developer Questline / Awaken Realms on October 1, 2026, added FSR to the upscaling options and made Grass Density a separate setting from Vegetation Quality. The developers said the patch improves performance and stability across platforms, but published no quantified PC frame-rate gains. See the official Patch 1.30 announcement.
- Choose a starting preset. Use Low if your hardware is close to Steam’s minimum tier. If it is above that tier, start with a middle preset rather than assuming Ultra is best for your system.
- Keep native resolution as your baseline. If frame rate is inadequate, try FSR in the game’s upscaling options. Patch 1.30 confirms FSR support but does not identify a best mode.
- Adjust Grass Density if the GPU is struggling. Test a lower density first, especially at high resolutions. If needed, reduce Vegetation Quality separately so you can see which change helps.
- Reduce draw distance if the system is lower-end or CPU-bound. Avoid starting at the maximum; lower it gradually if performance is uneven.
- Compare after each change. Use the same demanding area and adjust only one option between comparisons. This is a practical way to isolate changes, not a tested configuration or guarantee of improvement.
For other visual options, choose the look you prefer unless you have a reason to test them. The official information does not rank every setting by performance cost, so avoid assuming that a particular option will deliver a specific FPS increase.
Recommended Free Tools
Should you lower Grass Density or draw distance?
Grass Density and Vegetation Quality
The developer says Grass Density values were optimized for GPU-bound setups, high resolutions, and low-end GPUs. That makes density a sensible setting to test in those situations, but the announcement does not quantify its effect. Because Vegetation Quality is now separate, adjust it independently rather than treating the two controls as one.
#1 Best Overall
- Powered by Radeon RX 9070 XT
- WINDFORCE Cooling System
- Hawk Fan
- Server-grade Thermal Conductive Gel
- RGB Lighting
Draw distance
On PC, the draw-distance slider now goes up to 120%; Ultra+ uses 120% by default. The developers warn that higher draw distance may affect lower-end or CPU-bound systems. If you have one of those systems or see inconsistent performance, try stepping below the maximum. The patch does not establish a universal ideal value. Details are in the official patch announcement.
Does the game support FSR?
Yes. Patch 1.30 added FSR to the game’s upscaling options. Try it if you need more frame rate while keeping your chosen output resolution, then compare the image and performance in the same area. The announcement confirms the feature but does not specify a recommended FSR mode or promise a particular gain.
Rank #2
- NVIDIA Ampere Streaming Multiprocessors: The all-new Ampere SM brings 2X the FP32 throughput and improved power efficiency.
- 2nd Generation RT Cores: Experience 2X the throughput of 1st gen RT Cores, plus concurrent RT and shading for a whole new level of ray-tracing performance.
- 3rd Generation Tensor Cores: Get up to 2X the throughput with structural sparsity and advanced AI algorithms such as DLSS. These cores deliver a massive boost in game performance and all-new AI capabilities.
- Axial-tech fan design features a smaller fan hub that facilitates longer blades and a barrier ring that increases downward air pressure.
- OC Mode : 1500 MHz (Boost Clock)/Default Mode : 1470 MHz (Boost Clock)
How do Steam’s PC requirements compare?
Steam’s listing, accessed October 3, 2026, gives target specifications rather than a guarantee of locked frame rates in every scene. Its minimum tier is described for Low settings at 30 FPS and Full HD; its recommended tier is described for Ultra settings at 60 FPS and Full HD. The listing specifies DirectX 11 for both. See Steam’s system requirements.
Windows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallOutdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware match| Tier | Operating system | Processor | Memory | Graphics | Storage | Steam’s stated target |
|---|---|---|---|---|---|---|
| Minimum | Windows 10 64-bit | Intel i5 8th gen or AMD equivalent | 12 GB RAM | GTX 1060 6GB or AMD equivalent | 31 GB; SSD strongly recommended | Low, 30 FPS, Full HD |
| Recommended | Windows 10/11 64-bit | Intel i7 13th gen | 16 GB RAM | RTX 2070 Super | 31 GB; SSD strongly recommended | Ultra, 60 FPS, Full HD |
Steam’s SSD recommendation concerns storage; it does not establish that an SSD will fix low frame rates or stutter. The published targets also do not assure a locked 30 or 60 FPS in every location.
Rank #3
- Powered by the NVIDIA Blackwell architecture and DLSS 4. System Requirements: Minimum 850W PSU with 16-pin 12V-2x6 (12VHPWR) connector required. Verify before purchasing.
- Military-grade components deliver rock-solid power and longer lifespan for ultimate durability. Compatibility: 348mm (13.7") length, 3.6 slots, 4.3 lbs. Confirm case clearance and slot spacing. GPU bracket included.
- Protective PCB coating helps protect against short circuits caused by moisture, dust, or debris
- 3.6-slot design with massive fin array optimized for airflow from three Axial-tech fans
- Phase-change GPU thermal pad helps ensure optimal thermal performance and longevity, outlasting traditional thermal paste for graphics cards under heavy loads
Are Steam Deck performance targets relevant to PC?
Patch 1.30 adds two presets specifically for Steam Deck: Quality targets 30 FPS, while Performance targets 35–40 FPS. These figures describe the Deck presets, not desktop PC results, so they should not be used as a desktop performance benchmark. The targets are stated in the October 1, 2026 patch announcement.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
