iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
The Aeotec Motion Sensor is a Zigbee motion detector with an integrated temperature sensor. Aeotec also specifies a 120° viewing angle and describes SmartThings alerts and automations for compatible setups. Before buying, check whether your exact hub and regional sensor model work together: compatibility depends on the controller, not just the sensor’s feature list.
What does the Aeotec Motion Sensor do?
Aeotec describes the Motion Sensor as detecting movement and reporting temperature. Its product page lists a 120° viewing angle; this is a manufacturer-stated specification, not an independent measurement. Aeotec says the SmartThings app can send alerts about unexpected movement and use motion to automate connected devices as people come and go.
In Aeotec’s examples, motion can turn compatible lights on when someone enters a corridor and switch them off after a period without movement. With a hub-connected SmartThings Home Monitor setup, the sensor can help trigger security alerts. Temperature reports may also be used in routines involving compatible thermostats or air-conditioning units. These are possible integrations, not a guarantee that every hub or device supports every routine. See Aeotec’s Motion Sensor product page.
Check your hub before buying
The first buying check is whether your existing controller supports the sensor and its Zigbee connection. Aeotec’s support page identifies the Zigbee Motion Sensor as model GP-AEOMSSEU and explains that the controller determines which wireless technologies and devices a system can use. Aeotec describes Zigbee hub support and sensor-triggered automations on its SmartThings page, but confirm compatibility for your exact hub hardware and software before ordering. Regional model differences also matter; match the model identifier to your intended purchase.
#1 Best Overall
- 24/7 Monitoring: Receive alerts when there’s unexpected movement in your home
- Home Automation: Set devices to automatically turn on or off as people come and go to minimize energy usage
- Detection Ready: Adjust the sensor with the quick tilt magnetic ball mount to capture motion up to 15 feet with 120 degree view range
- Requirements: Requires smart home hub. Perfect With SmartThings App and Aeotec Smart Things Hub or other SmartThings hub such as Samsung SmartThings Hub Gen 3. Also works with other compatible Zigbee hubs.
If you only want motion detection, compare the sensor against options that work with your current hub. The Aeotec model’s temperature reporting is an additional capability, but it is useful only if your controller and routines can make use of that data.
Who is it a good fit for?
This sensor is most relevant to someone who already has a compatible Zigbee hub and wants motion-triggered lighting, alerts, or routines. Its temperature sensor may be a useful extra if the buyer’s system can incorporate those reports. SmartThings users should consider whether the app’s notifications and automation options match their intended use.
Rank #2
- 3-in 1 Motion, Temperature, Light sensor. Motion sensor accurate to 23 feet, TriSensor also detects temperature -10~50°C / 14~122°C with accracy of ±1°C, 0~30000 LUX with ±3% accracy.
- Adjustable calibration. Craft your own smart home with 3 levels of detecting calibration.
- Compatible with certified Z-Wave gateways including: Samsung SmartThings, Vera, Zipabox, Open Z-Wave, Homeseer HS3, Domoticz, Isy994i ZW universal controller and more.
- Wireless and Cordless. Powered by 1 x CR123A battery, estimated battery life: 1 Year.
- Z-Wave 800 for 50% more range in mesh configuration or up to 2500 ft with Long Range
The available product information does not establish a like-for-like competitor comparison or current pricing, so it is not possible to conclude that this is the best-value or best-performing motion sensor. Decide based on controller support and the specific motion and temperature functions you need.
Windows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallCrashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minutePairing and connection troubleshooting
Aeotec recommends checking that the sensor is in pairing mode and beginning setup reasonably close to the hub. Its support guidance suggests about 30 feet as a general distance, or as close as 10 feet for initial pairing. These are pairing suggestions, not a rated operating range.
Rank #3
- 6-in-1 Z-Wave Plus multi-sensor: motion, humidity, temperature, light lux, UV, vibration sensor
- Super-small at 1.8 inches. Can be installed in corner, in-wall, on shelf or in recessed downlight fitting
- 700 Series Z-Wave MultiSensor: This is the next generation MultiSensor to the best selling Aeotec MultiSensor 6
- Batteries Included: Use wirelessly with the included batteries
- USB powered: If you tired of changing batteries, use a USB power supply for MutliSensor 7
- Confirm that the sensor is in pairing mode and that the hub supports the exact model.
- Start pairing near the hub, following Aeotec’s general guidance of about 30 feet or closer; for initial pairing, try within 10 feet.
- If connection fails, power-cycle the sensor and hub, then try pairing again.
- If needed, reset the sensor and repeat setup using the instructions for your model.
Consult Aeotec’s Motion Sensor support page for its pairing and reset guidance.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.What this review can—and cannot—establish
Aeotec’s published information supports describing the product’s Zigbee connection, integrated temperature sensing, stated 120° viewing angle, and example SmartThings uses. It does not establish independent detection accuracy, false-alarm rate, response latency, battery life, or a measured operating range. No current price or verified retailer listing is established here, either. Treat those as unanswered buying questions rather than assuming performance from the feature list.
Quick Recap
Best Value
- ZIGBEE STANDARD COMPATIBLE MOTION SENSOR: A Zigbee Hub is required. Compatible with Zigbee hubs and Echo devices with built-in Zigbee hubs, including Echo (4th Gen), Echo Plus (1st & 2nd Gen), Echo Studio, Echo Show 8 (3rd Gen), Echo Show 10 (2nd & 3rd Gen), Echo Hub, Eero 6, Eero Pro 6, Home Assistant, SmartThings (2015/2018), Aeotec, Hubitat, Homey Bridge, Homey Pro, and Third Reality Hub Gen2 Plus.
- CREATE ROUTINES: Using the Alexa app, create your own routines that are triggered when motion is detected. Customize Alexa messages like “Welcome Home” or “Motion Detected in Living Room” when motion is detected.
- SMART LIGHT CONTROL: If you have a smart light or smart plug connected to the Alexa service, you can create a routine in the Alexa app that will enable it to automatically turn on when motion is detected (and off when no motion is detected for a period of time that you specify).
- HASSLE-FREE SETUP: Installs in a few seconds. Just make sure device in paring mode and compatible Echo device automatically discovers it by saying “Alexa, discover devices”. Only for indoor use.
- GREAT RANGE AND LONG BATTERY LIFE : Capable of detecting motion up to 20 feet (6 meters) away. 2 AAA batteries can last for 2 years in typical usage.
Rank #4
- ZIGBEE STANDARD COMPATIBLE MOTION SENSOR: Works with compatible Zigbee hubs or Echo devices with Zigbee hub built-in, such as Echo (4th Gen), Echo Plus (1st Gen and 2nd Gen), Echo Studio, Eero 6, Eero Pro 6, Home Assistant, SmartThings 2015/2018, Aeotec, Hubitat, Homey Bridge, Homey Pro, Third reality Hub and Third Reality Smart Speaker. Zigbee Hub Required.
- CREATE ROUTINES: Using the Alexa app, create your own routines that are triggered when motion is detected. Customize Alexa messages like “Welcome Home” or “Motion Detected in Living Room” when motion is detected.
- SMART LIGHT CONTROL: If you have a smart light or smart plug connected to the Alexa service, you can create a routine in the Alexa app that will enable it to automatically turn on when motion is detected (and off when no motion is detected for a period of time that you specify).
- HASSLE-FREE SETUP: Installs in a few seconds. Just make sure device in paring mode and compatible Echo device automatically discovers it by saying “Alexa, discover devices”. Only for indoor use.
- GREAT RANGE AND LONG BATTERY LIFE : Capable of detecting motion up to 20 feet (6 meters) away. 2 AAA batteries can last for 2 years in typical usage.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
Free tools Windows power users keep installed
One-click scans. No signup required.
