Quick wins for a faster PC:
Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Clear out junk files and repair common Windows errorsFree Scan →The right DeWalt corded drill depends on the job: choose the DWD210G for a general-purpose 1/2-inch drill, the DWD112 when a smaller 3/8-inch chuck and higher stated no-load speed suit your work, or the DWD520 when you need hammer action for masonry. Those are choices based on DeWalt’s published specifications, not a hands-on ranking: independent head-to-head tests and verified current prices are not available here, so “best value” depends on the price and warranty you can confirm where you shop.
Which DeWalt corded drill should you buy?
- For a versatile standard drill: Start with the DWD210G. It has a 1/2-inch chuck, a 10-amp motor, variable speed with reversing, and a side handle.
- For smaller bits and a higher stated no-load speed: Consider the DWD112. It has a 3/8-inch chuck, an 8-amp motor, and a stated speed range of 0–2,500 RPM.
- For drilling masonry with hammer action: Consider the DWD520, a 1/2-inch corded hammer drill with two speed ranges and drill/hammer modes.
- For another 1/2-inch standard-drill option: DeWalt lists the DW235G, but its product-page overview is internally inconsistent; check the current manual for detailed capacities and specifications before choosing it.
DeWalt’s U.S. drill-driver catalog lists corded models alongside cordless models, including the DWD210G, DWD112, and DW235G; catalog inclusion does not establish local availability or current price. See DeWalt’s drill-driver category.
How the corded models compare
| Model | Chuck and mode | Published motor and speed details | Useful distinguishing details |
|---|---|---|---|
| DWD210G | 1/2-inch; standard drill | 10 amps; variable speed/reversing, 0–1,250 RPM | Soft grip, 360-degree locking side handle, metal-gear housing; chuck key and side handle included. DeWalt lists a 3-year limited warranty, 1 year of free service, and a 90-day satisfaction guarantee; confirm applicable regional terms. |
| DWD112 | 3/8-inch; standard drill | 8 amps; 0–2,500 RPM | All-metal ratcheting keyless chuck and soft grip. |
| DWD520 | 1/2-inch; drill and hammer modes | 10 amps; two-speed range; specific RPM figures not stated on the cited product page. | Specified for work in masonry, wood, or steel; the hammer mode makes it the task-specific choice for masonry. |
| DW235G | 1/2-inch; standard drill | Specific motor and speed figures not stated in the cited product-page details. | DeWalt lists a side handle and chuck key. Verify detailed specifications in its current manual because the product-page overview appears inconsistent. |
Specifications in the table are from DeWalt’s U.S. product pages: DWD210G, DWD112, DWD520, and DW235G. Product-page specifications do not establish how a drill performs in every material, bit size, or working condition.
What matters when comparing them?
Chuck capacity and bit fit
A 1/2-inch chuck accepts bits with shanks up to 1/2 inch; a 3/8-inch chuck has a lower shank limit. A larger chuck gives you more bit compatibility, but it does not by itself prove that the drill will bore faster or more effectively. Match the chuck to the bits you expect to use and the work you do.
Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Clear out junk files and repair common Windows errors3Scan for outdated or missing drivers - takes under a minute#1 Best Overall
- 8-amp motor of the electric drill delivers high performance in heavy-duty applications
- 3/8-inch all-metal, ratcheting, keyless chuck is designed for greater bit retention of the corded drill
- DEWALT corded drill has 0-2,500 rpm with VSR trigger for versatility in drilling and fastening applications
- Mid-handle grip design with soft grip provides increased balance and comfort
- All ball bearing construction provides greater durability and longer tool life
Amps and RPM are not a performance ranking
The DWD112’s 2,500-RPM upper no-load figure is higher than the DWD210G’s 1,250-RPM upper figure, but speed and chuck capacity are different specifications. Neither the RPM number nor motor amperage alone establishes overall drilling performance. DeWalt Support says, “We typically do not rate our drills with torque values.” Its April 23, 2024 article discusses corded and older drills, gives the DWD210G’s 10 amps as an example, and says its packaging lists 980 MWO. That packaging figure is not a universal performance metric or a basis for converting amps into torque. Read DeWalt Support’s explanation of torque ratings.
Choose hammer action only when the task calls for it
The DWD520 is the option in this group with drill and hammer modes. That distinction matters for masonry; it does not make the DWD520 automatically the best choice for ordinary drilling. For work that does not call for hammer action, compare the standard drills by chuck, handling features, bit requirements, and the current price available to you.
Rank #2
- Variable speed reversing switch avoids air bubbles when mixing mud and offers greater control when drilling
- 0 - 550 RPM provides increased torque for drilling and mud mixing
- 9 Amp, 120V motor provides enough power for any job site application
- 7.5 lbs. (3.4 kg) increases user productivity and decreases user fatigue
- Soft grip handle provides superior comfort and ergonomics
Handling and purchase terms
The DWD210G’s published features include a soft grip and a 360-degree locking side handle, and its page lists the chuck key and side handle as included. Its listed warranty, service, and satisfaction terms may depend on the buyer’s region and the terms in effect at purchase. Confirm the exact model, included accessories, seller, stock, and applicable warranty before ordering; no verified transaction prices or stock checks establish which model currently offers the best value.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Capacity and safe drilling practice
For the DWD210G, DeWalt’s manual gives recommended maximum capacities for the DWD210G/DWD215G/DWD216G group: a 1/2-inch chuck, a 1/2-inch metal-drilling bit, and 1-1/2-inch flat boring in wood. These are manufacturer recommendations for that model group, not guarantees for every bit, material, or operating condition. Consult the DWD210G manual for full instructions and limitations.
The Tool Desk
Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Quick Recap
Best Value
- 7.8 Amp motor provides high performance and overload protection
- Variable speed allows for precise hole placement on work surface
- Dual mode: hammerdrill/drill for wood, steel or masonry applications
- 4.3 lbs. - lightweight design for extended use and less user fatigue
- 360° side handle with depth rod offers greater control, versatility, and increased depth accuracy
Rank #4
- This Certified Refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, a minimum 90-day warranty, and may arrive in a generic box. Only select sellers who maintain a high performance bar may offer Certified Refurbished products on Amazon.com
- 7.8 Amp motor provides high performance and overload protection
- Variable speed allows for precise hole placement on work surface
- Dual mode: hammerdrill/drill for wood, steel or masonry applications
- 4.3 lbs. - lightweight design for extended use and less user fatigue
Rank #3
- Powerful 7-amp motor of the electric drill gives the user the power to get the job done
- Compact design of the corded drill allows for user comfort
- DEWALT corded drill with lightweight design decreases user fatigue
- Variable speed trigger switch gives the user greater versatility
- Lock-on switch reduces fatigue
- Use sharp bits of the type suited to the material, and apply straight pressure while drilling.
- Hold the drill firmly with both hands. If it stalls, release the trigger immediately: an overload or stall can make the drill twist suddenly.
- When drilling metal, use cutting lubricant except when drilling cast iron or brass.
- Wear eye protection and follow the manual and normal safe-work practices for your job.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
