ADATA’s XPG announced a DDR5 overclock of 12,762 MT/s on April 2, 2025, in a collaboration with GIGABYTE. XPG said the result was verified by HWBOT. It was an extreme, single-module test using liquid nitrogen—not a speed buyers should expect from a retail memory kit or an ordinary desktop.
What was XPG’s DDR5 record?
XPG reported that GIGABYTE overclocker and engineer HiCookie reached 12,762 MT/s with an XPG LANCER RGB DDR5 module. The setup used a GIGABYTE Z890 AORUS TACHYON ICE motherboard, an Intel Core Ultra 9 285K processor and liquid-nitrogen (LN2) cooling. XPG described the motherboard as “meticulously designed for overclocking.” Read XPG’s April 2025 announcement.
Contemporaneous coverage identifies the memory as a 24GB XPG LANCER RGB DDR5-6400 module and gives its overclocked clock frequency as 6,381.2 MHz. DDR transfers data twice per clock cycle, so that clock frequency corresponds to an effective data rate of 12,762 MT/s. MHz and MT/s describe different quantities; they should not be used interchangeably. HotHardware reported the previous mark cited in its coverage as 12,735 MT/s. See HotHardware’s record coverage.
How did the record setup differ from a normal memory kit?
The result came from one module, very relaxed timings of 68-127-127-127-2T, and LN2 cooling. Liquid nitrogen is a specialized method for extreme overclocking, not a practical cooling approach for sustained everyday PC use. The record demonstrates what this module could reach in that test configuration; it is not a retail operating specification or a prediction of gaming or application performance.
#1 Best Overall
- ADATA RAM Lancer Blade DDR5 16GB 6000 Black RGB AX5U6000C4816G-SLABRBK 11M Warranty
How does 12,762 MT/s compare with retail XPG LANCER RGB memory?
ADATA’s current product-category listing shows XPG LANCER RGB DDR5 capacities of 16GB, 32GB and 48GB, with listed rated speeds ranging from 6000 to 8000 MT/s. These are family-level listings; they do not establish that every capacity-and-speed combination is available in every market. The record-setting 12,762 MT/s is an overclocked result, not a listed retail speed. Check ADATA’s XPG memory listings.
| Configuration | Speed | What the figure represents |
|---|---|---|
| Record test: one 24GB XPG LANCER RGB DDR5-6400 module | 12,762 MT/s | Overclocked effective data rate reported by XPG and contemporaneous coverage; achieved with LN2 and very relaxed timings. |
| Same module’s rated specification | DDR5-6400 | Module’s stated stock rating, not the record-test speed. |
| XPG LANCER RGB family listing | 6000–8000 MT/s | ADATA’s currently listed range across the product family; not a guarantee that every combination is offered in every market. |
For a build, choose memory based on the motherboard and processor’s support, the DIMM type and capacity you need, the module’s rated speed and latency, and the platform’s validated memory profile. A record reached with one LN2-cooled module does not establish that the same rate will work in a two- or four-module configuration.
Rank #2
- Compact Low-Profile Heatsink Design
- Customizable RGB light effects
- Create Personalized Lightshow with XPG Prime
- PMIC for power supply stability
- On-die ECC error correction
Is 12,762 MT/s still the world record?
XPG announced this as a record in April 2025, and said HWBOT verified the result. The available sources here establish that announcement, but do not establish the current record holder as of October 4, 2026. It is therefore accurate to call 12,762 MT/s XPG’s announced 2025 record result, not to present it as the current world record.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.How does it compare with XPG’s earlier DDR5 overclock?
In an October 8, 2021 release, XPG reported an 8,118 MT/s overclock on a DDR5 module rated at 4,800 MT/s stock, along with a second result of 8,104 MT/s. That is a separate historical XPG milestone; the available information does not establish it as the immediate predecessor to the 2025 result. Read XPG’s 2021 release.
Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Repair Windows errors before they cause bigger problems3Fix the driver behind crashes, sound loss and screen glitchesQuick Recap
Best Value
- 4711085945440
- AX5U5600C4616G-SLABBK
Rank #4
- Compact Low-Profile Heatsink Design
- PMIC for power supply stability
- On-die ECC error correction
- High-quality materials for stable overclocking
- Works with the Latest AMD Platforms
Rank #3
- 【Compact Low-Profile Heatsink Design】The LANCER BLADE RGB boasts a low-profile heatsink that fits perfectly in smaller PCcases and avoids interfering with tower CPU coolers. Its sleek geometric lines addversatility and visual appeal to any case design.
- 【8GB single-stick DDR5-5600 CL48 module】 runs at 1.35V with on-die ECC and a built-in PMIC for stable power delivery — ideal for first-time DDR5 builders who want one stick now and a second 8GB stick later for 16GB dual-channel expansion.
- 【Low-profile heatsink (no RGB height penalty)】 fits compact SFF builds and large air coolers, while Intel XMP 3.0 and AMD EXPO one-click overclocking lets you hit 5600MHz on either platform without manual BIOS tuning.
- 【RGB Your Way】Set the RGB lighting the way you want it. Choose from different effects (static,breathing, and comet) or syne the lights with your favorite jams via Music Mode. Allthis can be done through RGB control software from all the major motherboard brands.
- 【Enhanced Power Management】The XPG LANCER BLADE RGB DDR5 features a builtin Power Management IC (PMIC) that enhance power supply stability It's lower operating voltage also make LANCER more power-efficient than DDR4.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
