The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
To pair AirPods, turn on Bluetooth on the device, put the AirPods into pairing mode, then select them from the device’s Bluetooth settings. On an iPhone or iPad, you can usually start setup by opening the AirPods case nearby; AirPods Max use a different step. If AirPods stop connecting, check charge, Bluetooth, and audio output first, then re-pair and reset only if needed.
Pair AirPods with an iPhone or iPad
- Update your iPhone or iPad to the latest iOS or iPadOS, then open Settings > Bluetooth and turn Bluetooth on.
- For AirPods or AirPods Pro, place both earbuds in the case, open its lid, and hold it near the device. When the setup animation appears, follow the on-screen steps.
- For AirPods Max, remove them from the Smart Case and hold them near the iPhone or iPad within 60 seconds, then follow the setup prompts.
An internet connection may be needed to access Find My features during pairing. If no setup animation appears, use the manual pairing steps below.
Pair AirPods manually
Put the AirPods into pairing mode using the control for your model. The status light should flash white. Then open the device’s Bluetooth settings and select AirPods from the available devices.
Find the pairing control for your model
- AirPods 4 and 5, and AirPods Pro 3: Open the case with the earbuds inside and double-tap the front of the case until the status light flashes white.
- Other in-ear AirPods models: Open the case with the earbuds inside and press and hold the setup button on the back until the status light flashes white.
- AirPods Max: Press and hold the listening mode button until the status light flashes white.
Case designs and controls differ by model. If these steps do not match your AirPods, check the instructions for your exact model in Apple’s AirPods pairing guide.
PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchSpecial offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
#1 Best Overall
OLEBAND Case Compatible with AirPods 4rd Gen Wireless Charging Case
- 【Perfect Replacement】Wireless OLEBAND Charging Replacement Case is designed to charge Airpods 4th Generation and will only work with Airpods 4th Generation. If you lose your original charging case, this is the good choice for you.(Note: Earbuds are not included, only compatible with original headphones.)
- 【Easy to Pair】Just put your airpods 4 earbuds into this replacement OLEBAND charging case,Then long press sync button in the front. Then connect your airpods 4 to you iPhone,It will work
- 【620mAh Built-in battery】Replacement wireless charging case supports airpod 4 charging technology for fast charging in 20 minutes. You can listen to up to 3 hours of music in just 15-20 minutes of charging time. The replacement wireless OLEBAND charging case is perfectly compatible with Airpods 4th headphones. Never worry about your charging case running low again.
- 【Wireless and Type-c Wired Charging】Wireless OLEBAND charging case can be charged wirelessly by a Qi-compatible charging mat.It provides a faster wireless Charge to your device,you can also Charge through Type-c cable.
- 【Great After-sales service】If there is any problem with OLEBAND charging case,Please contact us: find your order in the order history, clicking "View order details" and "Ask Product Question"
Connect AirPods to a Mac
- Update macOS, then open Apple menu > System Settings > Bluetooth and make sure Bluetooth is on.
- Put your AirPods into pairing mode using the control for your model.
- Select AirPods in the Bluetooth device list and click Connect.
If you already set up AirPods with an iPhone, Apple says they should connect automatically to other Apple devices signed in to the same Apple Account.
Connect AirPods to Android or another Bluetooth device
- Turn on Bluetooth in the non-Apple device’s settings.
- Put the AirPods in their case and activate pairing mode with the control for your model. For AirPods Max, use the listening mode button.
- Select AirPods when they appear in the Bluetooth device list.
AirPods work as a Bluetooth headset on non-Apple devices for listening and speaking, but Siri is unavailable. Apple-specific features may not be available. See Apple’s instructions for pairing AirPods with a non-Apple device.
Rank #2
Sale
Yitonglian Wireless Charger Case Replacement for Airpods 4th Generation - Charging Case to USB-C Without Earbuds
- Only for Air Pods 4th Gen: This Yitonglian charging case ensures a perfect fit for the 4th generation earbuds (model A3053/A3050/A3054/A3056/A3055/A3057). Please note: It is not compatible with 1st, 2nd, pro or 3rd generation models
- Superior Battery Life & Rapid Charging: Equipped with a 450mAh battery, this Yitonglian air pods 4th case fully recharges in just 2.5 hours. It provides up to 3 additional full charges for your earbuds, and can quickly power up your earbuds to 100% in approximately 30 minutes for all-day listening
- Dual Wireless & Wired Charging：This Yitonglian charger case for air pod 4 can use the built-in USB-C port for a wired connection or place it on any Qi-certified wireless charger. For added convenience, it's also compatible with watch charger. (Note: earbuds and Type-C charging cable are not included)
- One-Touch Bluetooth Pairing: Effortlessly sync the Yitonglian replacement charging case with your phone. A simple button press activates Bluetooth pairing, allowing your phone to instantly recognize the case and display its battery status
- Clear LED Power Indicator: Stay informed of your power levels at a glance. The intuitive LED indicator light clearly shows the remaining battery capacity of the Yitonglian charging case, so you'll always know when it's time to recharge
Fix AirPods that will not connect
Work through these checks in order. Apple’s troubleshooting guidance recommends checking the device and charge state before re-pairing; reset is a later step if re-pairing does not solve the problem.
- Update the device. Install the latest operating system update for your iPhone, iPad, or Mac.
- Check charging. Put both AirPods in the charging case and confirm that both are charging.
- Confirm Bluetooth is on. Check Bluetooth in the device’s settings.
- Select AirPods as the audio output. Put them in your ears, open Control Centre on iPhone or iPad, and select AirPods if they appear as an output. Test playback and check the device volume.
- Restart the case connection. Put both AirPods in the case, close the lid for 15 seconds, then reopen it.
- Pair again. On a Mac, use the manual pairing procedure. On iPhone or iPad, use the pairing-mode control for your exact model and follow the on-screen steps.
- Reset only if re-pairing fails. Follow Apple’s model-specific reset instructions; reset steps are not the same for every AirPods model. Apple’s AirPods connection troubleshooting guide links to the relevant reset guidance.
Why AirPods pairing steps differ
The setup depends on both the target device and the AirPods model. iPhone and iPad can show a nearby setup animation, while Mac and non-Apple devices use Bluetooth settings. AirPods Max use their listening mode button; in-ear models use a case control, which is on the front for AirPods 4 and 5 and AirPods Pro 3, and on the back for other in-ear models.
Recommended Free Tools
Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Quick Recap
Bestseller No. 1
SaleBestseller No. 2
Bestseller No. 3
Best Value
Replacement Wireless Charging Case for AirPods 1st/2nd Charging Case, AirPods 1 Charging Case Only with Bluetooth Pairing Sync Button, Compatible with A1938/A1602, No Earbuds AirPods 2 Charger Case
- Dual Charging Methods: This AirPods 2 charging case supports both wired charging via lightning cable and QI Certified wireless charging. The LED indicator turns red when it needs to be charged and green when fully charged, keeping you informed of the battery status.
- Bluetooth Sync Button for Fast Pairing: Equipped with a Bluetooth pairing sync button, this AirPod 1 charging case ensures easy pairing with your AirPods 1st/2nd generation. Once paired, the case will automatically reconnect when you use it again, offering seamless connectivity.
- Quick & Efficient Charging: Featuring a 450mAh built-in battery, this replacement charging case for AirPods 1st/2nd Gen charges your AirPods in just 20 minutes, offering up to 5 full recharges to keep your AirPods powered throughout the day.
- Portable & Durable Design: This AirPod charging case replacement is lightweight and compact, making it easy to carry. It provides high-quality shell protection to ensure your AirPods 1st generation or AirPods 2nd generation are safe from damage during daily use.
- Comprehensive Compatibility & Support: This AirPods 1/2 charging case replacement is compatible with AirPods 1st/2nd Generation (A1722, A1523, A2031, A2032). Our customer support team is available to assist you with any issues, and please note: the case does not support Find My or magnetic charging.
Rank #4
Wireless Airpod Pro Charging Case Replacement for 2nd & 1st Gen(USB-C)
- Designed as a Premium Replacement for AirPod Pro 2nd & 1st Gen: This airpod charging case made specifically for airpod pro 1st and 2nd generation earbuds. It works flawlessly with one or both earbuds. You can easily turn audio alerts on or off by pressing and holding the button for 5 seconds. Important: This is a charging case only — earbuds are not included.
- Charge with Flexibility – USB-C or Wireless: Whether you prefer a wired connection or cord-free convenience, this case has you covered. Use any Qi-certified wireless charger or plug in via the built-in Type-C port. The smart LED indicator keeps you informed: Red light means 0–10% battery (needs charging), Green means 100% (fully charged).
- Instant Pairing & Auto Reconnect: Setup is simple — just press the sync button to pair, and the case will automatically reconnect to your device every time you open the lid. For first-time use, make sure both the case and earbuds have at least 30% charge, hold the button until the white light flashes, then tap “Connect” on your device.
- Long-Lasting Power in a Compact Design: Powered by a 660mAh battery, this replacement case fully charges in about 3 hours and provides up to 3 full charges for your AirPod Pro earbuds — giving you over 7 hours of total playback. Need a quick boost? Your earbuds can be recharged in just 25 minutes.
- Built to Protect, Easy to Carry: Engineered with multi-layer safety protection, this case delivers reliable everyday performance. Its compact size (2.36 × 0.97 × 1.77 inches) makes it highly portable, and the built-in lanyard hole helps keep it secure. Whether you're looking for a dependable AirPod Pro charging case or a durable airpod case replacement, this is your go-to companion.
Rank #3
Replacement Charging Case for AirPods Pro 2nd/1st Gen, No Earbuds
- 【Practical Replacement Case】This is a wireless charging case only for AirPod Pro 2nd/1st Gen Type-C port. Provides a great replacement for lost or damaged original charging case. (Compatible with models A2083, A2084, A2931, A2699, A2698, A3047, A3048, A3049; Earphones not included)
- 【Dual Charging Convenience】Enjoy a flexible charging solution for your AirPods Pro 2/1. The charging case compatible with Qi wireless charging mats and also features a USB-C port for a reliable wired charging connection, allowing you to switch between methods seamlessly
- 【One-Step Bluetooth Sync】For first-time pairing, ensure the case and AirPods Pro 2 are charged (recommended above 30%). Hold the sync button until the light flashes white, then select your AirPods in your device's Bluetooth settings. After setup, opening the case typically allows automatic reconnection to your device
- 【High-Capacity & Efficient Charging】This 660mAh wireless case charges in around 2 hours. It is designed to give your AirPods Pro 1st/2nd generation about 3 complete recharges, usually within 25 minutes per charge.This helps maintain steady listening during daily use and travel
- 【Help & Support】If pairing is not successful on the first attempt, please recharge the wireless charging case and earbuds, then repeat the sync process. For any questions regarding product performance, you may reach out to our support team. Note: This charging case is not equipped with Find My or device tracking functions
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
