iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
You can 3D print useful Xbox Series X setup accessories for controller and headset storage, plus a horizontal console stand. The five community designs below are examples rather than tested recommendations: listings differ in controller compatibility, mounting hardware, assembly and licensing, so check the exact model page and your hardware before printing.
Five useful Xbox Series X 3D-print ideas
These designs solve organization and placement problems; they do not upgrade the console’s electronics or performance. Several controller listings refer to Xbox One controllers, so do not assume a fit with every Xbox controller generation.
1. Wall-mounted controller holder
This Printables holder is listed for an Xbox One (Series X) controller. Its page says to use screws or nails no larger than 3 mm. Confirm the controller fit and the wall’s suitability before installing it.
Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Clear out junk files and repair common Windows errors3Scan for outdated or missing drivers - takes under a minute2. Wall bracket for two controllers and a headset
This remixed wall bracket is described as holding two controllers and one headset. Its listing carries an Attribution-NonCommercial license: that does not grant commercial-use permission. Check the exact license terms before remixing, redistributing the files or selling prints.
#1 Best Overall
- 【Necessary for Xbox Series X】---- This product integrates many functions, such as top cooling fan, dust-proof, light strip, USB interface for data transmission and USB port for charging. It helps to prevent for Xbox Series X console from over-heating and dust to extend the life of your console. (NOTE:When the console is working, the dust cover of the fan can be removed to speed up the heat dissipation effect. Alige the two holes under the dust cover first, then cover the dust cover.)
- 【Efficient Fan System】---- A high-speed large fan are built in the colorful dust-proof cooling fan，which can accelerate the hot air exhausted from the top of the console and reduce the temperature for Xbox series X console. The cooling fan stand with 3 gears and is a touch switch. The low gear is orange, the second gear is blue, and the high gear is green.The heat dissipation effect is more obvious, and the noise is very low, which you can hardly feel.
- 【Colorful Light Strip】---- The cooling bracket for Xbox seris X supports colorful lights and can change the light color with an independent touch switch. The light strip contains 6 monochromes and 1 mixed color. You can use the independent touch switch to change your favorite colors and own a more atmosphere in the process of the game. (NOTE: pressing the light switch for the 7th time will turn light off.)
- 【3.0 USB & USB Charge Port】---- There are 2 USB interfaces in total, one blue 3.0 USB interface supports 3.0 data transmission, another white 2.0 sub interfaces ONLY can charge more products, such as controller, mobile phones, small desk lamps, etc.It is convenient to provide USB interface in the process of your game.
- 【Dust Cover Filter】---- The cooling top bracket for Xbox seris X supports top dust proof,At the same time, the product contains 2 sets * dust cover compatible with Xbox Series X, 1 set * silicone dust plugs,which have accurate size and easy to install and replace without additional tools. Prevent dust from entering the USB and HDMI ports for Xbox Series X, extend the life of your console.
3. Controller-and-headset stand
This separate stand is described for one Xbox One X controller and one headset. The author recommends printing the parts and gluing them together. Treat that as this model’s assembly guidance, not a requirement for the other designs.
4. Horizontal Xbox Series X stand
This listing is explicitly titled for a horizontal Xbox Series X stand. It describes a plug-in front piece intended to avoid bridging in the X detail. The listing does not establish the stand’s stability or ventilation performance; assess placement and console support yourself rather than treating the model title as a safety guarantee.
Rank #2
- 【Accessories for Xbox Series X Gaming Lover】This multifunctional cooling fan for xbox series x will become a must-have accessory for xbox series x owners. Featuring a cooling fan, dust prevention, charging, and lighting effects, it not only provides cooling for your xbox series x console, but also offers various cool lighting effects, creating a richer atmosphere for your gaming desktop.Batteries & Chargers Compatible with Xbox
- 【11 LED Light Modes for Customization】The top of the Xbox series X cooling fan has 11 adjustable lighting modes: 7 solid colors (red, green, deep blue, yellow, purple, light blue, white).Long press the light button to turn off all lights, short press to switch colors. Built in intelligent chip, which can improve security even after long-term use
- 【Temperature Detector & Anti Touch Device】Built in temperature detector, when you select automatic mode, our cooling system series x can automatically adjust the fan speed according to the temperature of the host, constantly reducing the internal temperature of the host. Even during long-term gaming, you don't have to worry about the host overheating and affecting the gaming experience. The anti touch device can prevent your hands from being scratched by the rotating fan
- 【Efficient Cooling System for Series X with 3 Level Fan】Equipped with a high-speed 3-level adjustable fan, it can quickly exhaust hot air according to the temperature of the series x console, keeping the Xbox series x console cool. The 1 level speed is 1600rpm, the 2 level speed is 2000rpm, and the 3 level speed is 2400rpm. The 9 blades have a more obvious heat dissipation effect, avoiding console overheating .Helps extend the lifespan of the console
- 【LED Temperature Display】The LED display screen can clearly see the temperature of your Xbox Series X console and the current fan level at all times. There are also two touch buttons on the LED screen, one can control the lighting effect and the other can adjust the fan gear
5. Stackable controller mount with spare AA holder
This MakerWorld design is listed as a stackable controller mount and includes a holder for spare AA batteries. Its page says the mounts can be printed in multiples and stacked. Check the listing for assembly and fit details before making several.
The Tool Desk
Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →Compare placement, capacity and assembly
| Design | Placement and capacity | Hardware or assembly stated by the listing |
|---|---|---|
| Wall-mounted controller holder | Wall; one controller | Screws or nails no larger than 3 mm |
| Two-controller and headset wall bracket | Wall; two controllers and one headset | Attribution-NonCommercial license |
| Controller-and-headset stand | Stand; one controller and one headset | Author recommends gluing printed parts together |
| Horizontal Series X stand | Horizontal console placement | Plug-in front piece |
| Stackable controller mount | Stackable mounts; spare AA holder included | Page describes printing multiple mounts and stacking them |
A separate wall-mount listing, Controller and Headphone Wall Mount, says its holes are sized for #8 wood screws. That is a different design from the five above; do not substitute its screw size for another model’s requirements.
Rank #3
- 🎮SIMPLE BUT POWERFUL🎮Control and navigate the game consoles, TV, Blu-ray and apps at the touch of a button via a traditional & compact remote with soft rubberized texture
- 🎮SECURE BATTERY COVER🎮It’s attached firmly on the remote with the improved hook design to avoid the sliding off issue
- 🎮PRESS BUTTONS ANYTIME EASIER🎮Motion activated backlighting helps you locate buttons in the dark
- 🎮PLUG AND PLAY🎮Install the batteries in the remote control and it can function well without setting (However, TV control function depends on the setting and TV itself - Please refer to the user manual)
- 🎮WHAT ELSE🎮Offer the replacement without charge within the warranty period & helpful customer service anytime
Check print settings, fit and installation before use
The Printables page for the wall-mounted holder specifies PLA, 0.20 mm resolution, 10% infill and supports. Those are that listing’s settings, not a universal profile or a guarantee of strength. Follow the selected model’s instructions and your printer’s material and setup requirements. PLA filament is named because this model page lists it; no particular brand, color or formulation is required by the evidence here.
- Verify which controller model the design names, then check the fit against the controller you intend to store.
- For wall-mounted designs, use the hardware and dimensions stated on that exact listing and make sure the installation surface is appropriate.
- For the glued stand, follow the author’s assembly recommendation and allow the adhesive to set as directed by its manufacturer.
- Inspect the printed part and installation before relying on it to hold a controller, headset or console.
- Read the exact model’s license before modifying, sharing or selling files or printed parts.
These are community model listings, not evidence of Microsoft endorsement or independently verified fit, strength or safety. Choose based on the storage problem you want to solve, then verify the design and placement for your own setup.
Quick Recap
Best Value
- ONLY FOR XBOX SERIES X- Specially designed for Xbox Series X Console. The dust filter kit helps to prevent the dust from entering your game console, keep your Xbox Series X dust free.
- CLEAN AND ENJOY THE XBOX SERIES X GAMES- Anti-dust plug can prevent dust from entering the USB and HDMI ports of the game console, and the PVC fan dust mesh filter can effectively reject the entry of dust when inhaling cold air to prolong the life of the fan. Better dust-proof effect.
- EASY TO INSTALL- Just tear off the protective film on the dust-proof net, and then align the corresponding space of the Xbox Series X. Dust plug installation need to remove 8 dust plugs, and then just find the corresponding USB, HDMI, power and other interfaces to install.
- DURABLE MATERIAL- High Quality Rubber Covers for Xbox Series X Can be used for unused slots in the back of the system. The dust mesh covers endure high temperature. They can be reused, and will not be deformed after long-term use.
- WHAT YOU GET- 8pcs Dust Plugs, 4pcs Dust Mesh covers, 6pcs thumb grips. (Please Note: The console are not included) Trust us to keep your Xbox Series X running smoothly and looking great.
Rank #4
- 🍃LED Temperature Display-You can always know the temperature of your Xbox Series X console. It helps to prevent your Xbox Series X console from over-heating to extend the life of your Xbox Series X.
- 🍃Intelligent Control & Custom fan speed-[Automatic Mode]: The chip of G-STORY Xbox Series X cooling fan can automatically sense the temperature to adjust the fan speed, you can just enjoy the game and leave the heat to our cooling fan. (when the temperature is <35℃/95℉, it will stop working.) [Manual Mode]:Press the button to select the 3 speed you need, the LED will change color with the speed. (Note: Press down the button for 3s to switch between manual and automatic mode.)
- 🍃Three Level Fan Speed: Depends on the temperature of your xbox console, the Xbox Series X fan cooling system has 3 levels of fan speed(1500/1750/2000RPM) with RGB LED (Green light: 35~43℃/95~109℉; Blue light: 44~48℃/110~118℉; Red light: >48℃/119℉), it can cool your console at the most appropriate speed to protect your console.
- 🍃Low Noise & Light Weight: The Xbox Series X cooling fan is low noise and light-weight, it's powered by your xbox console, it's super portable and won't take too much space.
- 🍃Easy to Install: Just simply place the cooling fan on your console, and connect the cable to your xbox console, it will start to work. If you have any questions about using our product, please feel free to contact us. G-STORY is always here for you.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
