Recommended Free Tools
iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
Gregory Quirk’s 2009 review paired Yamaha’s HTR-6260 A/V receiver with Energy’s RC-Micro 5.1 speaker system. In his two-week, single-room evaluation, the receiver was straightforward to connect and offered useful features for its era, while the tiny speakers were easy to mount but struggled with dialogue clarity, bass impact, and filling a larger room. Those listening results are one reviewer’s experience, not a controlled test; both products are legacy equipment, and current availability, prices, and condition are not established.
What the Yamaha and Energy system includes
The pairing combines a Yamaha HTR-6260 receiver with Energy’s RC-Micro 5.1 package: four compact satellites, a center speaker, and a powered subwoofer. Quirk’s July 15, 2009 review describes using the receiver to connect a cable box, Blu-ray player, Xbox 360, and PlayStation 3. That was his source-device setup at the time, rather than a statement about current-device compatibility.
The HTR-6260 is described in the review as a 7.2-channel A/V receiver with four HDMI inputs. The review reports a 90-watt surround-mode specification claim, not an independent power measurement. It also cites Dolby TrueHD, DTS-HD Master Audio, and 17 DSP listening effects. These are historical features; the cited review does not establish support for newer video formats or modern streaming devices.
Energy’s ©2008 specification sheet describes the RC-Micro as an 8-ohm-compatible system and recommends 20–100 watts of continuous amplifier power for its satellites and center. These are manufacturer ratings, not independent measurements. See the 2009 EE Times review and Energy’s RC-Micro 5.1 specification sheet.
#1 Best Overall
- Universal Replacement Remote Control Fit for 491 RX-V1065 RX-V1065BL HTR-6260 RAV287-WR002100 RAV290-WR002400 YHT-695BL HTR-7065 for Yamaha AV Receiver
- This is high quality and brand new remote, good replacement for you !
- No programming required ! Put batteries in and will work well !
- Batteries needed: 2X 1.5V AAA Batteries ( Batteries and manual are not included ).
- If you habe any questions, please just contact us, thank you !
How the receiver performed in the review
Setup and features
Quirk said connecting the source devices and switching HDMI inputs was simple. He used Yamaha’s YPAO room setup with its microphone and test signals, and judged the resulting calibration accurate in his installation. His overall description was a receiver that was easy to set up and feature-rich for its period.
Input switching and power behavior
The reviewer encountered occasional lip-sync glitches after switching between input types. He said briefly pausing the Blu-ray player resolved the issue in his setup. He also found the receiver’s power-toggle behavior awkward with a programmed Harmony remote activity. These are dated, individual observations; the review does not establish how often other units exhibit the same behavior.
Rank #2
- 1. No Programming Required: Easy to set up, no programming required, convenient for everyone to use
- 2. Required battery type for installation: 2 AA type or 2AAA type 1.5V alkaline batteries (excluding) remote control; infrared
- 3. Our remote control is the same as the picture, please carefully check the model you want. If your model does not match, please consult us
- 4.If you need help or have any questions, please contact us and we will provide you with high-quality service.
- 5. All packages undergo strict testing before being sent out. Please confirm that the package is intact and undamaged before signing for it. After receiving the package, if you have any questions about the product, please feel free to contact us without initiating a dispute. We will reply to you within 24 hours and do our best to help you solve the problem.
What the RC-Micro speakers are like
Size and speaker specifications
Energy’s 2008 sheet lists each satellite at 4.7 × 3.5 × 3.5 inches and 1.6 pounds, and the center at 3.5 × 5.9 × 3.5 inches and 1.9 pounds. The satellites and center use a 0.5-inch hyperbolic aluminum-dome tweeter and a 2.5-inch high-excursion aluminum-cone woofer. Energy specifies a 150 Hz–23 kHz frequency response and 88 dB room efficiency for those speakers, alongside 8-ohm compatibility and 20–100 watts continuous recommended amplifier power.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Subwoofer specifications
The included ESW-CS8 is identified by Energy as an 8-inch subwoofer with 240 watts of amplifier power and a 36–180 Hz frequency response. Its listed controls include a variable 40–150 Hz low-pass filter and 0°/180° phase control; connections include RCA line/sub and speaker-level inputs. These are manufacturer specifications, not independent output tests.
Rank #3
- Yamaha factory refurbished items are products, which may have been purchased and opened by a consumer, but have been tested, inspected, and repackaged by Yamaha.
- Yamaha factory refurbished items may have minor cosmetic damage.
- Ultra HD (4K) Pass-through for Next Generation Super High Resolution Images
- HDMI with 3D and Audio Return Channel, HDMI CEC for Easy Operation
- YPAOTM Sound Optimization for Automatic Speaker Setup, SCENE for One-touch Start
Mounting and appearance
The satellites and center have gold-plated push connectors, built-in keyhole slots, and a 1/4-20 threaded insert. Quirk found the light speakers straightforward to mount with a screw and keyhole, and described a gloss-black finish. He also thought the small cubes looked mismatched beside a larger television in his home. Energy’s manual says the threaded insert can work with various aftermarket mounting systems, but compatibility and included hardware should be checked for a specific mount.
Listening impressions: strengths and limitations
During two weeks of listening, Quirk found few noticeable surround effects in movies and said dialogue was often overpowered by other scene audio. Raising the subwoofer level did not produce the rumble he wanted. In the Xbox 360 game Burnout, passing-car effects became more apparent at high volume, but he still felt the subwoofer lacked impact. He described music as somewhat flat, with quiet bass and limited sound carry into an adjoining kitchen.
Rank #4
- Fit For 491 RX-V1065 RX-V1065BL RAV290 HTR-6260 RAV287-WR002100 RAV290-WR002400 YHT-695BL HTR-7065 For Yamaha AV Receiver
The contrast is practical: the system’s compact dimensions and easy mounting were advantages, but in the reviewer’s larger living room it did not provide the clarity, bass weight, or coverage he wanted. He thought a smaller apartment or dorm room could be a better fit. This is a subjective assessment from one room and listening setup, not a universal prediction for every room or listener.
Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Clear out junk files and repair common Windows errors3Fix the driver behind crashes, sound loss and screen glitchesHow to connect and configure the RC-Micro
Set the receiver crossover
Energy’s owner manual recommends setting the front, rear, and center speakers to “Small,” and the subwoofer setting to “on” or “use.” It suggests a receiver crossover between 120 and 180 Hz when available, and says 120 Hz is appropriate for this system in most rooms. The manual’s wording is: “When using the RC-Micro System, the appropriate crossover frequency should be 120Hz in most rooms.” Adjust for room acoustics and preference rather than treating the recommendation as a guarantee of a particular sound. See Energy’s RC-Micro owner manual.
Best Value
- Materials: Remote control is made of durable and recyclable ABS material and the buttons are made of soft rubber.You will feel it soft touch and anti-dusted.
- Compatible Model:RAV283 RAV284 HTR-6230 RAV285 RX-V363 RX-V365RX-V463 RX-V563 RX-V663 HTR-6130 HTR-6140 YHT-390 YHT-690 HTR6160 YHT-491BL YHT-590BL YHT-390BL YHT-593WN05810 WN05820
Connect the subwoofer
- If the receiver has a subwoofer or preamp output, connect it to the subwoofer’s LFE/left input with a standard male-to-male RCA cable, as shown in Energy’s manual.
- If the receiver lacks an RCA subwoofer output, the manual documents using the subwoofer’s speaker-level inputs.
- Match positive and negative speaker-wire polarity. Energy warns that reversed polarity can cause a severe lack of bass.
The manual also explains adjusting subwoofer level, low-pass filter, and phase to blend the subwoofer with the satellites and center.
What to check before buying used legacy equipment
The cited sources establish historical specifications and setup guidance, not present-day stock, pricing, or the condition of any used receiver or speaker set. Before considering a listing, verify the exact model, what components and accessories are included, and whether each unit functions properly. Check the receiver’s specifications for impedance support, channel configuration, and the outputs needed for your setup; confirm that its video and audio connections meet your requirements. For the speakers, confirm that the satellites, center, subwoofer, cables, and any mounting hardware you need are present and in suitable condition. An 8-ohm rating and a published feature list do not establish the health or compatibility of an individual used unit.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
Free tools Windows power users keep installed
One-click scans. No signup required.
