The Tool Desk
Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
The Prusa CORE One+ INDX is worth considering if you regularly print with several materials or colors and value keeping separate tools ready. Its toolchanger promises less purge waste than a conventional single-nozzle multicolor workflow, but the trade-offs are a high purchase price, a smaller installed build area and a more involved setup. It is not an automatic upgrade for every CORE One+ owner.
What the CORE One+ INDX changes
The INDX is a toolchanging system developed by Bondtech with Prusa. One active smart head works with up to eight passive toolheads; induction heats the nozzle on the tool in use. Prusa describes it as “a toolchanger that turns your CORE One+ into an 8-material machine.” That means the printer can have multiple materials or colors ready without routing each one through a single nozzle. It does not mean eight materials are printed simultaneously.
Prusa lists tool swaps at approximately 12–16 seconds and purge waste at approximately 13 mg per swap. These are manufacturer figures, not independent guarantees; total print time also depends on the model, settings and how often tools must change. The basic attraction is straightforward: changing tools can avoid some of the purge associated with switching filaments through one nozzle, while allowing each tool to have its own filament loaded.
For a practical comparison with a filament-switching system or another toolchanger, look beyond the advertised swap time. Compare how many materials stay ready, waste and purge behavior, total time including nozzle heating, usable build volume, material and nozzle options, installed price, upgrade path and setup effort. Prusa publishes comparisons with the Snapmaker U1 and Bambu Lab X2D, but those are manufacturer comparisons and should be read as such.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
How much does it cost?
Prusa’s product page displayed four US configurations when accessed October 7, 2026. The listed prices span $1,699 to $2,249; Prusa says final pricing and delivery are calculated at checkout, and totals can change with region and add-ons. Check the live page before ordering.
| Configuration | Displayed US price |
|---|---|
| Four tools, kit | $1,699 |
| Eight tools, kit | $1,949 |
| Four tools, assembled printer | $1,999 |
| Eight tools, assembled printer | $2,249 |
Prusa’s CORE One+ INDX product page is the relevant place to confirm current options and checkout totals. The assembled printer is the simpler route if you do not want to convert a machine yourself. A kit may appeal to buyers comfortable with assembly, but the conversion experience described in an early review should not be mistaken for the installation time of an assembled purchase.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
What you give up: build area and setup time
With INDX installed, Prusa lists a build volume of 248 × 205 × 270 mm. Tom’s Hardware says that is 2 mm less in X and 15 mm less in Y than the CORE One+. Check the dimensions of your usual parts before buying: the reduction may be immaterial for small objects but can rule out a design that previously fit.
Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Clear out junk files and repair common Windows errors3Scan for outdated or missing drivers - takes under a minuteInstallation complexity is another real cost, especially for owners converting an existing printer. In Tom’s Hardware’s account of an early Founder’s Edition conversion, the reviewer spent most of a weekend configuring the system, while Prusa’s estimate was five to six hours. That is one reviewer’s experience with an early conversion, not a universal estimate for every kit or a description of the assembled printer. It does show why buyers should treat the upgrade path as more than a simple accessory swap.
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Print results: promising, but one comparison is not a guarantee
In one comparison, Tom’s Hardware reported that its test print ran nearly nine hours faster on INDX than on a Bambu Lab H2C, used 83.58 g less material waste excluding supports, and used three more colors. Those results apply to that review’s particular model and settings. They do not establish that INDX will be faster or produce less waste on every job.
TechRadar reported very good multicolor print quality in its review, alongside a couple of misprints during initial runs that the reviewer later resolved while learning the system. Those observations are useful context, but they are not a defect-rate estimate or evidence about long-term reliability. The available reviews do not establish representative failure rates, production uptime or long-term customer-support outcomes.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Materials and nozzle options
Prusa lists a maximum nozzle temperature of 300 °C, 1.75 mm filament and nozzle options from 0.25 to 1.0 mm. Its compatibility list includes PLA, PETG, ASA, ABS, PC, PA, TPU, PVA and BVOH, with limitations for abrasive materials. These are manufacturer compatibility claims, not independently tested results for every filament or tool combination. If you print abrasive filament, confirm the specific limitations and suitable hardware before relying on it.
Should you buy it or upgrade?
It makes sense if
- You frequently print multicolor or multi-material models and want several tools loaded and ready.
- Reducing purge waste matters for your workload, and the system’s added cost is justified by how often you use that capability.
- Your parts fit within the listed installed build volume.
- You are comfortable with either the conversion work of a kit or the higher displayed price of an assembled configuration.
It is a weaker fit if
- You mostly print single-material parts, so multiple ready tools would rarely help.
- You regularly use nearly all of the CORE One+ build area, particularly the Y dimension.
- You want an effortless upgrade and are considering a kit without allowing for configuration and installation work.
- You need proven long-term reliability or a representative failure rate before committing; the cited reviews do not establish those outcomes.
For an existing CORE One+ owner, the key question is whether multi-tool printing solves a recurring problem—not simply whether the upgrade is possible. Prusa announced on August 20, 2026 that standard conversion kits had begun shipping and complete Gen 2 INDX printers were open for orders in four configurations. Stock and delivery can change; consult Prusa’s shipping and ordering announcement and the live product page for current availability.
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Verdict
The CORE One+ INDX is a compelling, specialized toolchanger rather than a universally better CORE One+. Its multi-tool approach can make color and material changes more practical, and one independent comparison showed notable time and waste savings. But the price, reduced installed build volume and configuration burden make it most appealing to frequent multicolor or multi-material users who have checked that their parts fit. If those jobs are occasional, the added capability may not justify the cost and complexity.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
