Do these 3 things before closing this tab:
1Clear out junk files and repair common Windows errors2Fix the driver behind crashes, sound loss and screen glitches3Repair Windows errors before they cause bigger problemsiTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
Intel’s DC S3610 and DC S3710 are legacy enterprise SATA SSD families, not current mainstream NVMe drives. Their defining difference is write endurance: Intel rated the S3610 for 3 drive writes per day (DWPD) and the S3710 for 10 DWPD, each over five years. Both families use 20nm MLC NAND with Intel High Endurance Technology, but capacity, form factor, performance and firmware status matter when choosing one for an existing system.
Contemporaneous coverage reported the launch of the two families; the original Intel launch release was not located. The specifications below are Intel manufacturer figures, not independent benchmark results.
What are the Intel DC S3610 and S3710?
They are Intel data-center SSDs built for SATA-attached enterprise workloads. Both support SATA Revision 3.0 at 6Gb/s, 3Gb/s and 1.5Gb/s. Their SATA interface does not guarantee compatibility with every server: the drive must also fit the bay and carrier, match the system’s power arrangement, and be supported by the host.
The families use 20nm MLC NAND and Intel High Endurance Technology (HET). Intel’s specifications distinguish them most clearly by endurance tier and available models.
#1 Best Overall
- 1.92TB SATA 6Gb/s 2.5-Inch Read-Intensive Enterprise SSD — Intel D3-S4510 series enterprise solid state drive designed for read-intensive workloads including virtualization, cloud applications, databases, content delivery, and large-scale analytics environments
- 64-Layer Intel 3D TLC NAND — Read Intensive Endurance — 1 DWPD read-intensive endurance rating delivering 560 MB/s sequential read and 510 MB/s sequential write speeds with 97,000 random read IOPS for consistent low-latency data access
- Enterprise Data Protection — AES 256-bit encryption, Power Loss Protection, and End-to-End Data Protection ensure data integrity and compliance in always-on 24/7 data center environments
- Drop-In SATA Compatible — Compatible with existing SATA infrastructure across Dell PowerEdge, HPE ProLiant, Supermicro, and other enterprise server platforms — no additional hardware required. Innovative firmware updates complete without server reset to minimize downtime
- 2 Million Hour MTBF Enterprise Reliability — Rated for continuous 24/7 operation for mission-critical storage deployments requiring maximum uptime and reliability
How do their capacities and endurance ratings compare?
| Family | Listed capacities and form factors | Rated endurance |
|---|---|---|
| DC S3610 | 2.5-inch: 100GB, 200GB, 400GB, 480GB, 800GB, 1.2TB and 1.6TB; 1.8-inch: 200GB, 400GB and 800GB. | 3 DWPD for five years. Intel’s specification gives total-write ratings by specific capacity and form factor. |
| DC S3710 | 2.5-inch: 200GB, 400GB, 800GB and 1.2TB. | 10 DWPD for five years: 3.6PB for 200GB, 8.3PB for 400GB, 16.9PB for 800GB and 24.3PB for 1.2TB. |
DWPD expresses the rated amount of data that can be written each day relative to the drive’s capacity over the stated endurance period. The S3710’s 10-DWPD tier is substantially higher than the S3610’s 3-DWPD tier, but a higher rating alone does not establish that a drive is the right choice: match the rating and capacity to the workload and host requirements. Intel’s S3610 specification and S3710 specification list the model-specific details.
What performance does Intel specify?
Intel’s product specifications list sustained sequential read speeds up to 550MB/s and write speeds up to 520MB/s for both families; maximums vary by capacity. The family summaries also list up to 84,000 4KB random-read IOPS and 28,000 4KB random-write IOPS for the S3610, and up to 85,000 read and 45,000 write IOPS for the S3710. These are manufacturer maxima under specified test conditions, not promises for every capacity or application.
Rank #2
- Intel SSD D3-S4510 Series (960GB, 2.5in SATA 6Gb/s, 3D2, TLC) Generic Single Pack
The specifications include different workload and measurement details across metrics, including tests with compressible and incompressible data. They also list average sequential latency of 55µs read and 66µs write, plus 99.9th-percentile read/write quality-of-service figures of 500µs/5ms under the specified test workload. A useful comparison therefore needs the relevant capacity and workload, rather than a single headline IOPS number. Consult the S3610 and S3710 data sheets for their metric-specific qualifications.
Free tools Windows power users keep installed
One-click scans. No signup required.
What should you check before using a secondhand drive?
Intel’s support article lists both series among former Intel NAND SSD products that are no longer supported by Intel. Lenovo’s S3710 guide says its listed S3710 options have been withdrawn from marketing. Those notices establish legacy status, not that every source of stock has disappeared.
Rank #3
- Intel SSD D3-S4510 Series (1. 92TB, 2. 5in SATA 6Gb/s, 3D2, TLC) Generic Single Pack YOUNGSVILLE REFRESH
- Confirm the exact model, capacity, form factor and SKU against the server’s bay, carrier, power and host-support requirements. S3610 includes 1.8-inch variants; the listed S3710 family is 2.5-inch.
- Review the drive’s health and SMART data, and ask for its firmware version.
- Check the seller’s return terms and any warranty that remains.
- Verify that the drive’s endurance tier and condition suit the actual write workload.
Intel’s INTEL-SA-00050 advisory, originally released March 15, 2016, describes an issue involving SATA-protocol-violating commands. Intel states: “If the Intel SSD Data Center Family for SATA product receives certain commands that violate the SATA protocol, the drive may stop responding to host commands and, in that event, user data will be inaccessible.” The advisory says the issue does not itself corrupt data and that platforms whose host implementation complies with SATA are not at risk.
The advisory lists S3610 and S3710 among affected families. It identifies firmware versions G2010100, G2010110, G2010120, G2010130, G2010140 and G2010141 as affected, and G2010150 as mitigated. Intel recommends applying the mitigated firmware with its Solid State Drive Data Center Tool. Do not assume a used drive has been updated: verify its exact model and firmware against Intel’s advisory and update guidance.
Rank #4
- Intel SSD D3-S4510 Series (240GB, 2. 5in SATA 6Gb/s, 3D2, TLC) Generic Single Pack
Which family makes sense for a legacy system?
Use the S3710’s higher rated endurance tier as a reason to examine it for a write-intensive workload, not as a substitute for checking the exact model, health or compatibility. The S3610 may be a fit where its rated endurance and available capacity meet the workload; its 1.8-inch models may also matter where the hardware specifically requires that form factor. For either family, compare the capacity-specific specification, actual workload needs, host support and firmware state before sourcing a drive.
Intel’s product-identification and support article identifies both as no longer supported by Intel. For S3710 ordering and withdrawal details, see Lenovo’s S3710 product guide.
Quick Recap
Best Value
- HIGH CAPACITY - 1.6TB, Intel DC S3610 Series uses the latest 20nm NAND Flash Memory Multi-Level Cell (MLC). You will also benefit from the high quality and reliability you’ve come to expect from Intel
- HIGH PERFORMANCE - Intel DC S3610 Series accelerates platform performance with sequential reads of up to 550 MB/s and sequential writes of up to 520 MB/s and random read and write input/output operations (IOPS) of up to 84K and 28K respectively
- SMALL FORM FACTOR - Intel DC S3610 Series 2.5" form factor delivers outstanding performance for thin and light computing devices
- VERY RELIABLE - Mean Time Between Failures 2 Million Hours. You will also benefit from the high quality and reliability you’ve come to expect from Intel, comes with manufacturer warranty until 2022
- POWER SAVING - Intel DC S3610 Series for SATA improves data center efficiency, with superior quality of service, reduced energy costs, and is ideal for server or application upgrades
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
