iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
You can restart a Bose Smart Soundbar 700 without its remote by unplugging it for 30 seconds, reconnecting it, and waiting about 30 seconds for it to start. That is a power-cycle reset, not a factory reset: Bose’s documented factory-reset procedure requires the remote’s Power and Skip forward buttons.
Restart the soundbar without erasing its settings
Bose describes a power-cycle reset as a way to correct minor processor errors; settings are ordinarily retained. Follow these steps:
- Turn off the soundbar.
- Unplug its power cord from the soundbar or wall outlet.
- If connected, unplug the power for the bass module and surround speakers as well. Bose specifically advises disconnecting both surround-speaker receivers.
- Wait 30 seconds, then reconnect the soundbar’s power.
- Allow about 30 seconds for the soundbar to reboot.
- Reconnect accessory power if you unplugged it.
Bose’s Soundbar 700 reset instructions distinguish this restart from a factory restoration. Unplugging the bar is not a way to erase its saved configuration.
The Tool Desk
Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →Can you factory-reset it without the remote?
Bose’s documented Soundbar 700 factory-reset procedure requires the remote. The instructions do not document a remote-free button sequence or an app command to initiate that reset. If you need to restore factory defaults and do not have a working compatible remote, obtain one confirmed to work with the Soundbar 700 before proceeding; do not assume an unverified third-party remote will work.
#1 Best Overall
- Note: **This remote does not support BD connectivity or Wi-Fi. It cannot perform all the functions of the original remote control
- Supported Models: Compatible with Soundbar 700 Home Theater
- No Setup Needed: Just pop in batteries (not included), and you're ready. No programming, no hassle
- What's Included: 1* Remote Control (batteries and manual not included)
- Before You Order: Please check that this remote matches your original remote. If not, it may not work. Not sure about compatibility? We will be happy to assist you
What the factory reset does
A factory reset clears the soundbar’s source, volume, network, and ADAPTiQ audio-calibration settings, then returns it to setup mode. Before resetting, Bose’s instructions say to remove the product from your Bose account; if Alexa or Google Assistant is configured, follow Bose’s additional removal guidance for the assistant.
Factory-reset steps when you have the remote
- Follow Bose’s account and voice-assistant removal guidance, if applicable.
- On the remote, press and hold Power and Skip forward together for five seconds.
- Wait for the light bar to blink twice and the soundbar to reboot. A steady amber light indicates that reset is complete and the soundbar is in setup mode.
For the exact instructions, see the Bose reset support page and the Soundbar 700 owner’s guide.
Rank #2
- 【Applicable Model】Replacement remote control for Bose TV Speaker, Bose Solo Soundbar Series II, Bose Solo TV Sound System, Bose Solo 5, Bose Solo 10, Bose Solo 15, Bose Solo 10 Series II, Bose Solo 15 Series II
- 【Transmission Distance】Our remote control features with stable proformance, up to 40ft precise control and 0.2s quick response, designed specifically for Bose soundbar devices.
- 【High Quality Replacement Remote】Durable lifespan, our remote crafted with high-quality materials to withstand daily use and provide long-lasting performance, is the best choice for your damaged or lost remote control.
- 【Easy to Use】No programming required, easy to use. Just need to insert the new battery flat side up and start using the remote immediately(Batteries Not Included)
- 【NO PROBLEMS YOU ORDER】We sincerely hope that you can truly enjoy our shopping. We are always worried that we will miss every message from you.
Set it up again after a factory reset
Use the Bose app to set up the soundbar again, restore its network and audio configuration, and rerun ADAPTiQ calibration. Bose documents the app for setup after reset, not as a way to start the factory reset.
See Bose’s resetting instructions and ADAPTiQ setup guidance for the relevant steps.
Quick Recap
Rank #3
- Compatible Models：This New Replacement Remote Control is Compatible with Smart Soundbar 700
- 【NOTE】Not compatible with other brands or types. Before ordering, please ensure your original remote control matches the buttons and appearance shown in the illustration. Otherwise, it may not function properly
- Easy to Use: Features an upgraded chip with built-in infrared technology. No programming or pairing required—just requires two standard AAA batteries
- Durable & Comfortable: Featuring high-quality ABS material and a newly upgraded smart chip, it delivers instant button response with precise control up to 8 meters/26 feet. Soft silicone buttons protect fingertips, while the ergonomic curved design ensures comfortable, fatigue-free use during extended daily operation
- Package included ＆ After-Sales Service:1 * Remote Control ( Battery ＆ Instruction Not Included.) If you have any questions, please contact us through AMZ tools and we will help you within 12 hours
Choose the right reset
| Goal | Bose-documented action | Settings impact | Remote required? |
|---|---|---|---|
| Restart or address a minor processor issue | Unplug for 30 seconds, reconnect, and wait about 30 seconds | Settings are ordinarily retained | No |
| Return to factory defaults | Hold Power and Skip forward on the remote for five seconds, following applicable account or assistant removal guidance | Erases source, volume, network, and ADAPTiQ calibration settings | Yes |
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
