The Tool Desk
Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
To make custom-shaped stickers with Cricut StickerPix, use the StickerPix Print + Cut machine and its dedicated StickerPix Print + Cut Sticker Sheets. In Cricut Design Space, start a sticker sheet, add artwork, adjust each sticker border, review the layout, and choose Make and then Go!. The machine prints the design, applies its laminate layer, and kiss-cuts the sticker shapes while leaving the sheet backing intact.
That workflow is different from StickerPix Print, which prints onto preset pre-cut shapes, and from Cricut’s separate Print Then Cut process, which uses a conventional printer and a cutting machine.
What Cricut StickerPix Print + Cut does
StickerPix Print + Cut combines printing and contour cutting in one compact workflow. You create the artwork in Design Space, place a StickerPix sheet in the material tray, and the machine produces a finished sheet of individual stickers. A kiss-cut passes through the sticker face but not the backing, so the stickers remain together on one sheet until you peel them away.
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Fix the driver behind crashes, sound loss and screen glitches3Clear out junk files and repair common Windows errorsCricut describes the printed result as water-, scratch- and fade-resistant and says a laminate layer is applied during printing. Those are manufacturer claims rather than independent durability-test results, so treat them as an expectation for the intended materials, not a guarantee for every environment or use.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
StickerPix Print + Cut versus StickerPix Print
| Capability | StickerPix Print + Cut | StickerPix Print |
|---|---|---|
| Sticker outline | Custom outlines generated from your designs | Preset, pre-cut sticker shapes |
| Printing and cutting | Prints, laminates and kiss-cuts in the machine | Prints onto shapes that are already cut |
| Supplies | StickerPix Print + Cut Sticker Sheets and the compatible ink cartridge or refill | StickerPix Print media and its corresponding supplies |
| Best fit | Illustrations, logos, photos and other artwork that needs a custom contour | Projects that fit the available preset shapes and do not need custom cutting |
Cricut says the two models use different media and ink and are not cross-compatible. Do not put StickerPix Print sheets in the Print + Cut model or assume that a Print + Cut refill will work in the print-only model.
Do not confuse it with Print Then Cut
In Cricut terminology, StickerPix Print + Cut is an integrated product. The machine itself prints and cuts. Cricut’s broader Print Then Cut feature is a different arrangement: a separate home or office printer produces the page, and a compatible cutting machine reads registration marks and cuts it. Instructions for one process do not automatically apply to the other.
Specifications and what they mean
The figures below are specifications published by Cricut for StickerPix Print + Cut. They are not independent measurements.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
| Specification | Cricut-listed figure or description | Practical meaning |
|---|---|---|
| Print resolution | 300 DPI | Use sufficiently large source images; a low-resolution upload can still look soft. |
| Printing method | Dye-sublimation | The machine is designed around its own cartridge and media system. |
| Sticker Sheet size | 4 × 7 inches (Cricut also lists more exact metric dimensions in its Help Center) | Keep all artwork inside the white canvas shown in Design Space. |
| Photo Paper size | 4 × 6 inches | Use the optional photo media for photos or photo cards, not as a substitute for StickerPix sheets. |
| Ink yield | Up to 36 prints per cartridge | A manufacturer allowance; actual yield depends on how much of each sheet is covered. |
| Content library | More than 1.8 million sticker images claimed by Cricut | Availability of particular assets, templates or tools can vary by account and region. |
What you need before designing
- A StickerPix Print + Cut machine with its cutting tool installed.
- Cricut Design Space on iOS, Android, macOS or Windows.
- An internet connection and Bluetooth connection, which Cricut lists as requirements for the machine.
- StickerPix Print + Cut Sticker Sheets and the compatible Cricut ink cartridge or refill.
- Optional Cricut Photo Paper if you also intend to make photo prints or photo cards.
- A phone, tablet or computer with enough storage for your source photos and designs.
Complete the machine setup in Design Space before beginning a project. Select StickerPix Print + Cut as the machine type, pair the machine with your device, and make sure the supplied cutting tool is installed. Cricut warns that third-party sheets or ink can cause clogging, print defects or machine damage. The safest way to troubleshoot a print problem is therefore to return to the specified media and cartridge before changing software settings.
How to make a sticker sheet in Design Space
1. Open a blank sticker sheet
- Open Cricut Design Space and choose Stickers.
- Choose Blank Sheet, then select Start Designing. You can also start a new project and use Stickers → Blank Sheet → Start Designing.
- If you prefer a guided layout, begin with a Design Space template instead. The exact templates and paid-content requirements can change, so check what your account displays.
The blank sheet is the working area that corresponds to the physical StickerPix sheet. Leave a margin around the edge rather than placing artwork against the canvas boundary.
2. Add your artwork
Use the Design Space image library, shapes and text, or upload your own photos and designs. You can add a background and adjust image fills with the editing controls available in your version of Design Space. Cricut also documents Sticker Transformations for uploaded photos; the transformation styles shown may vary by software version, account and region.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
On a blank sticker sheet, Cricut states: “Anything added to the Canvas will automatically become a sticker.” Each object therefore receives a sticker border and is prepared for a cut line unless you change that setting.
3. Set the border and non-sticker elements
Select an object and use the Border controls to change the border size or color. A larger border creates more breathing room around an illustration; a smaller border follows the artwork more closely. If an item should print but should not be cut as its own sticker, turn off the Sticker option in the Border controls.
That switch is useful for printed captions, decorative marks or a background that belongs inside another sticker. Without it, the object remains an independent sticker element.
4. Arrange, resize and merge
Resize each design and position it within the white sheet area. Design Space treats overlapping designs as separate stickers unless you merge them. Select the elements that should become one outline and choose Merge Sticker. This is important for a character with separate accessories, a badge with text, or any composition where a single outer contour is wanted.
Keep small details large enough to weed and peel comfortably. In an October 9, 2026 Tom’s Guide hands-on review, Lucy Scotting reported that some small detailed designs and photos benefited from adjustment. That is one reviewer’s observation, not a guaranteed result for every image, sheet or setting.
5. Inspect the mat preview
Choose Make to open the project preview. Confirm that every sticker appears inside the printable area, that no element is unexpectedly marked as a sticker, and that merged artwork has one intended outline. If anything is misplaced, return to the canvas before sending the job.
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
6. Send the job to StickerPix
When the preview is correct, select Go!. Design Space sends the design to the connected StickerPix Print + Cut machine. Follow the on-screen prompts for the selected material rather than substituting a generic sticker-paper setting.
7. Load the dedicated sheet
Place a StickerPix Print + Cut Sticker Sheet in the material tray, using the orientation and guides shown by the machine or Design Space. The sheet must be flat and free of lifted corners, dust and debris. Do not substitute StickerPix Print media, ordinary adhesive paper or third-party stock when trying to diagnose a feed or print issue.
8. Print, laminate and kiss-cut
The machine prints the artwork, applies its laminate layer during the print process, and then cuts the sticker outlines. Wait for the machine to finish before moving the sheet. The completed sheet should show cut lines around the stickers while the common backing remains uncut.
9. Remove and test a sticker
Lift one corner of a sticker carefully and verify that the sticker face separates from the backing along the intended contour. If the backing has been cut through, the result is a die-cut rather than a kiss-cut and indicates that the material or machine setup does not match the specified workflow.
Kiss-cut, die-cut and laminate: the terms that matter
Kiss-cut
A kiss-cut cuts the adhesive sticker layer while leaving the backing sheet intact. It is the standard StickerPix Print + Cut result and is convenient for storing or handing out a full sheet.
Die-cut
A die-cut passes through both the sticker and its backing. StickerPix Print + Cut is not intended to produce separate backing-free die-cut pieces in one pass.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Laminate
Cricut says the machine applies a laminate layer as part of printing. Cricut also describes the finished prints as water-, scratch- and fade-resistant. Those descriptions depend on the specified materials and conditions; they should not be read as a laboratory rating for outdoor exposure, dishwashing or permanent immersion.
Recommended Free Tools
Choosing the right media and cartridge
| Project | Use | Do not substitute |
|---|---|---|
| Custom-shaped stickers | StickerPix Print + Cut Sticker Sheets | StickerPix Print sheets, ordinary printer sticker paper or unapproved third-party media |
| Photo prints or photo cards | Cricut Photo Paper, listed at 4 × 6 inches | StickerPix Print + Cut sheets when the project is intended as a photo print |
| Ink | The compatible StickerPix Print + Cut cartridge or refill | StickerPix Print ink or a generic cartridge |
Cricut says StickerPix Print refills and media are not cross-compatible with Print + Cut. Buy supplies by the exact model name, not merely by the word “StickerPix.” Cricut’s warning about third-party products includes possible clogging, print defects and machine damage.
Bundle contents and price context
When the product page was accessed for this article, Cricut listed a Machine + Essential Bundle at $299 and a Machine + Ultimate Plus Bundle at $379. These are volatile retail figures: taxes, country, promotions, stock and bundle contents can change, so verify the current listing before purchase.
| Bundle | Price shown by Cricut at the time of access | Published contents or caveat |
|---|---|---|
| Machine + Essential Bundle | $299 | Cricut listed the machine, ink cartridge, 18 Sticker Sheets, 18 Photo Paper sheets, power adapter and pre-installed cutting tool. |
| Machine + Ultimate Plus Bundle | $379 | Bundle contents can vary; check the current product page for the exact list. |
The ink-yield figure of up to 36 prints per cartridge is also a Cricut specification. A sheet with dense full-coverage artwork can consume more ink than a sheet containing a few small icons, so do not treat the number as a fixed number of identical projects.
Design decisions that prevent wasted sheets
- Use high-quality originals: a 300 DPI printer cannot restore detail that was absent from a small or compressed upload.
- Keep a peelable border: a narrow border can make a sticker harder to separate and can expose tiny edge defects.
- Merge intentionally: merge only the elements that should share one outer contour; leave separate stickers unmerged.
- Check photos at actual size: faces and fine text can lose clarity when reduced to a small sticker.
- Fill the sheet sensibly: arrange multiple designs with enough space for each cut line and avoid placing important artwork at the edge.
- Preview before printing: the Make preview is the last point at which a layout mistake costs no material.
Troubleshooting common problems
The machine will not connect
- Confirm that Design Space is signed in and that the machine is selected as StickerPix Print + Cut.
- Check Bluetooth on the phone, tablet or computer and keep the device close to the machine.
- Confirm internet access, since Cricut lists internet as a requirement.
- Power-cycle the machine and reopen Design Space if the connection does not appear.
The wrong sticker border appears
Return to the canvas, select the affected object and inspect the Border controls. Adjust the border size or color, or turn off Sticker when that object should print without an individual cut. Then use Make again and inspect the preview.
Windows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallOutdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchSeveral objects should have one outline but cut separately
Select the related objects and choose Merge Sticker. Overlap alone does not combine them; Design Space otherwise treats overlapping designs as separate stickers.
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
The sheet feeds poorly or the print has defects
Stop using the questionable sheet or cartridge and check that the material is the specified StickerPix Print + Cut stock, flat and clean. Cricut specifically warns that third-party supplies can cause feed, clogging, print-quality and machine-damage problems. Replace the sheet with approved media before attempting another print.
The result is cut through the backing
StickerPix Print + Cut is designed for kiss-cuts. Verify that the selected machine type and material are correct, and that you did not substitute media intended for another StickerPix model. If the problem persists with approved supplies, follow Cricut’s current support procedure rather than repeatedly running the same sheet.
Photos or tiny artwork look poor
Use a larger, less-compressed source image, increase the physical sticker size, simplify fine details and inspect the design at the intended output size. Scotting’s Tom’s Guide review similarly noted that some small detailed designs and photos needed adjustment during her test.
How fast is the process?
In a Tom’s Guide review published October 9, 2026, Lucy Scotting said she completed a sheet in roughly two to three minutes while testing the Print + Cut model with photo stickers and Design Space templates. That timing is a single reviewer’s firsthand observation. Your duration can vary with artwork coverage, connection time, loading, cartridge condition and the number of sheets in the job.
Who should choose StickerPix Print + Cut?
Choose it when you need custom shapes
The Print + Cut model makes sense for logos, character silhouettes, irregular labels, photo contours and other designs that do not fit preset shapes. Its integrated printing and cutting also avoids coordinating a separate printer with a cutting machine.
Choose the print-only model when preset shapes are enough
If your project fits StickerPix Print’s available pre-cut shapes, custom contour cutting adds complexity without solving a real problem. The print-only model is the more direct match for that use case, provided you buy its own media and ink.
Plan for consumables
StickerPix is a closed, model-specific media system. The machine’s convenience depends on keeping the correct StickerPix Print + Cut sheets and compatible ink available. That ongoing supply requirement matters as much as the initial machine price.
Free tools Windows power users keep installed
One-click scans. No signup required.
Quick Recap
Final checklist before pressing Go!
- The machine is set to StickerPix Print + Cut and connected through Bluetooth.
- Your Design Space project uses the correct blank sheet or template.
- Every object has the intended Sticker setting and border.
- Elements that should share one contour have been merged.
- The preview keeps all artwork within the printable white area.
- A clean StickerPix Print + Cut Sticker Sheet is loaded in the tray.
- The compatible cartridge or refill is installed.
- You are ready to leave the sheet still while printing, laminating and cutting finish.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
