iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
Yes—the original Corsair Obsidian 750D is a full-tower case with multiple documented radiator mounting positions, making it a plausible foundation for a custom water-cooling loop. Corsair lists radiator formats from 120 mm through 360 mm and describes room for dual radiators at the front, top, and bottom. Those are manufacturer-listed compatibility claims, not a guarantee that every radiator, fan stack, and component arrangement will clear.
First confirm which 750D you have: the original (CC-9011035-WW) and the 750D Airflow Edition (CC-9011078-WW) are separate models with different front panels.
Which Corsair 750D are you planning around?
The original Obsidian Series 750D Full Tower ATX Case has SKU CC-9011035-WW. Corsair describes it as a full tower with a steel and brushed-aluminum exterior and an acrylic window.
Recommended Free Tools
The 750D Airflow Edition is SKU CC-9011078-WW and has a mesh front panel with two 140 mm front intake fans. Do not assume a specification for one variant applies to the other.
#1 Best Overall
- FRAME Modular Case System - The revolutionary FRAME system gives new meaning to the word customization. Want to upgrade the motherboard tray to billet aluminum? Want to swap out your front I/O panel for more USB ports? Now you can. A case that can change and grow with your needs (or just your mood). The options are nearly limitless
- 3x CORSAIR RS ARGB PWM Fans - High-performance fans pre-installed in the front of case. Support daisy-chainable 4-pin PWM connections and Zero RPM mode for near-silent operation at low loads. Each Fan has eight LEDs and easily controllable with your motherboard’s +5V ARGB connector
- CORSAIR InfiniRail Fan Mounting System - This steel multi-point mounting system offers unmatched flexibility in front and roof fan configuration. Simply slide the rail to mount fans up to 200mm (140mm in the roof) wherever you like, ensuring targeted airflow
- Clean Lines or Turbo Cooled - The internal side panel near the motherboard tray can be used as a cable cover for clean cable management, or you can remove it and mount fans to the side for increased cooling potential
- 3D Y-Pattern Airflow Panel - Optimized for high airflow and minimal restriction, the steel front panel is perforated in three dimensions with a Y-pattern that provides a low-obstruction path for cool air
What radiator sizes and locations does Corsair list?
Corsair’s original 750D product page lists compatibility with 120, 140, 240, 280, and 360 mm radiators and describes space for dual radiators at the front, top, and bottom. The installation guide provides more position-specific context:
- Top: mounting for triple-120 mm or dual-140 mm fans, corresponding to 240, 280, or 360 mm radiator formats.
- Rear: 120 or 140 mm radiator mounting.
- Front: dual-120 mm or dual-140 mm fan mounting, corresponding to 240 or 280 mm radiator formats.
The product page and guide do not summarize compatibility identically. Treat nominal sizes as a starting point, not proof that every listed size fits every position. Use the exact mount diagram in the guide and check your chosen radiator and fan dimensions before buying or assembling.
What else affects fit?
Radiator length alone does not establish clearance. Check the radiator’s thickness, whether fans sit on one or both sides, motherboard and graphics-card clearance, drive-cage position, and the specific mounting location. The case’s modular drive cages are relevant because their placement can affect available room and airflow.
Rank #2
- Triple-Chamber Design – Superior cooling performance is possible due to isolated chambers for the most powerful hardware including CPU, GPU, and PSU
- Isolated CPU Cooling Chamber – Separate chamber on the front of the chassis holds a 360mm radiator for CPU cooling, ensuring none of the heat generated in the chamber affects other components
- GPU and Motherboard Chamber – The central chamber is designed to offer massive vertical airflow to cool all the components thoroughly and then exhaust the hot air out of the chassis
- PSU and storage chamber – A third chamber houses the power supply, storage, and cables, and it has its own dedicated intake and exhaust locations as well
- Airflow Ducts – An innovative duct on the bottom fan array in the main chamber accelerates airflow as it’s forced into a narrow channel. This increases airflow velocity without requiring increased fan speed, improving cooling power without added noise
Corsair’s product page and installation guide also give different clearance figures, so there is no single universally supported maximum in those documents:
| Specification | Corsair product page | Installation guide |
|---|---|---|
| Maximum GPU length | 450 mm | 460 mm in the top slots; 340 mm in the lower slots |
| Maximum CPU-cooler height | 170 mm | 180 mm |
These are figures from different Corsair documents and may reflect different measurement contexts. Check the exact slot, drive-cage arrangement, and cooling configuration against the guide rather than treating either figure as a guaranteed limit for every build.
What are the stock fans and airflow differences?
Corsair says the original 750D includes three AF140L 140 mm fans and supports up to eight fans. Its installation guide shows two front intakes and one rear exhaust. The Airflow Edition’s mesh front is a distinct design feature, with two 140 mm front intakes documented by Corsair. These specifications describe included hardware and layout; they do not establish comparative temperatures or noise.
Rank #3
- NOTE: The following product only includes 3x Pre-Installed Fans and iCUE LINK System Hub. The other components featured are not included.
- Single-Piece Curved Glass Panel - The front and side panel are made from a single piece of glass, providing an unobstructed, wraparound view of a PC’s glorious hardware
- Reverse-Rotor RGB Fans – The included side-mounted 120mm fans use a reverse-rotor design to blow cool air into the case while providing an unobstructed view of their dazzling RGB LEDs
- Cascading Industrial Design – Clean lines cascade like a waterfall over the exterior of the chassis, offering generous openings for airflow and a unique look that sets it apart
- FRAME Modular Case System - The revolutionary FRAME system gives new meaning to the word customization. You can upgrade the motherboard tray, change the side-mounted fans to a cable cover, or swap out the PSU shroud to a form-fitting design with vertical GPU mounting points. It’s a case that can change and grow with your needs (or just your mood)
What other specifications matter for a build?
Corsair’s original 750D product page lists dimensions of 560 × 235 × 546 mm, a maximum PSU length of 220 mm, nine expansion slots, and support for Mini-ITX, MicroATX, ATX, E-ATX, and XL-ATX motherboards. These are the figures on that official listing; check the exact model and regional product page if your case differs.
The Tool Desk
Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Can you still get model-specific replacement parts?
Corsair’s 750D spare-parts list, updated September 18, 2024, names these parts and identifiers:
- Front/bottom dust filter: CC-8930174; top mesh filter: CC-8930186.
- Windowed side panel: CC-8930167; solid side panel: CC-8930168; front fascia: CC-8930169.
- Drive tray/cage parts: CC-8930032 and CC-8930040; I/O panel: CC-8930173; USB-C I/O upgrade: CC-8900138.
- AF140L fan: CO-8950006; bottom radiator bracket: CC-8930195.
A parts listing is not a promise of current stock. Check availability and exact fit with Corsair or the seller before ordering. Corsair’s full-tower case support article, updated February 13, 2026, still includes both 750D variants among its full-tower cases; that listing alone does not establish whether the cases are discontinued or currently available at retail: Corsair full-tower cases.
Is the 750D a good basis for a custom loop?
Its full-tower format, several documented radiator locations, broad nominal size support, and removable or modular drive cages make the 750D a reasonable candidate for a multi-radiator custom loop. That is a conclusion from the published design and compatibility information—not evidence of tested temperatures, noise, ease of a particular build, or long-term reliability. Confirm the exact case variant and component clearances before settling on a loop layout.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
