Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Clear out junk files and repair common Windows errors3Fix the driver behind crashes, sound loss and screen glitchesiTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
The best short microphone stand depends on where the mic needs to sit. For a kick drum, amp, or another near-floor source, the K&M 25950 is an extra-low freestanding boom. For a desktop, the K&M 25995 provides a compact flat base, while the Gator SH-BROADCAST2 clamps to or mounts through a desk and reaches up to 33 inches. Match the mounting style, reach, and thread to your setup rather than choosing by the word “short” alone.
Short microphone stands at a glance
| Stand | Best fit | Published dimensions and mounting | Important detail |
|---|---|---|---|
| K&M 25950 | Kick drum, amp, or other low floor position | 280 mm listed height; telescopic boom 425–725 mm; folding legs | 3/8-inch connector; 2.98 kg listed weight [KMR Audio] |
| K&M 25995 | Tabletop or low floor position with a freestanding base | Height 11.22–15.75 inches; 12.20-inch boom; 7.87 × 7.87-inch base | 5/8-inch connector and four elastic rubber feet [K&M data sheet] |
| Gator SH-BROADCAST2 | Desk or broadcast table, when an attached arm is preferred | Up to 33 inches (838 mm) extension; clamp fits surfaces up to 2.17 inches (55 mm) | Published capacity 4.4 lb (2 kg); clamp or direct-drill mounting [Shure product page] |
| Gator SH-BROADCAST1 | Desk arm for named Shure microphone families | Up to 32.25 inches (940 mm) extension; clamp fits surfaces up to 2.17 inches (55 mm) | Threaded extension adapter; microphone sold separately [Shure product page] |
Dimensions and compatibility above are published specifications, not comparative test results. Product listings, revisions, and regional availability can change.
Choose by where the microphone needs to go
For a kick drum, amp, or low floor position: K&M 25950
The K&M 25950 is the most directly matched of these options when the microphone must sit close to the floor. KMR Audio lists a 280 mm height and a two-piece telescoping boom adjustable from 425 to 725 mm. Its short, heavy folding legs and zinc die-cast base make it a freestanding choice rather than a desk attachment. KMR lists a 2.98 kg weight and a 3/8-inch threaded connector. Check the actual mic position and thread fit before ordering; the listed height alone does not establish the reach or clearance of every setup. [KMR Audio]
Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minutePC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11For a table or low floor placement with no clamp: K&M 25995
The K&M 25995 uses a flat steel plate base measuring 7.87 by 7.87 inches, with four elastic rubber feet. The US manufacturer data sheet specifies an adjustable height of 11.22 to 15.75 inches, a 12.20-inch boom, and a 5/8-inch connector. K&M describes it for broadcast or conference tables and as a floor stand for amplifiers. Allow space for its base and compare the stand’s range with the height your mic position requires. [K&M 25995 data sheet]
#1 Best Overall
- Robust & Durable Base: This premium desktop microphone stand boasts a heavy-duty, powder-coated black finish base, complete with a rubber gasket on the bottom. This design absorbs vibrations and ensures precise balance and stability, making it perfect for supporting kick drum mics and amp mics in professional settings.
- Adjustable Boom Arm: The extendable boom arm allows for independent length and angle adjustments, offering unparalleled flexibility. With a maximum load capacity of 4.4 lbs (2.0 kg) when extended halfway, it easily supports heavier microphones like the Blue Snowball and Blue Yeti. Additionally, a 3/8" female to 5/8" male screw adapter is included, ensuring compatibility with a wide range of microphones.
- Height Customization: Featuring a reliable clutch mechanism, the height of this InnoGear heavy-duty microphone stand can be adjusted from 11" to 15.8". This allows you to set the stand at the perfect height for maximum comfort and optimal performance during use.
- Versatile Applications: Designed for flexibility, this desktop microphone stand is ideal for a variety of professional applications, including broadcasts, podcasts, and live performances. Its versatile configuration also makes it suitable for floor applications, such as miking guitar amplifier cabinets, bass guitar amplifier cabinets, snare or tom drums, keyboard amplifiers, theater settings, and boundary miking.
- Wide Compatibility: This microphone stand is compatible with a vast array of microphones, including models like the Fifine K669B, NW-700, Audio-Technica AT2020, Audio-Technica AT2035, Razer Seiren X, and Shure SM7B. Whether you're a podcaster, musician, or audio engineer, this stand is built to meet your professional needs.
For a desk-mounted arm: Gator SH-BROADCAST2
The Gator SH-BROADCAST2 is a steel arm that Shure describes as designed to stay below the shoulder line. It can clamp to a surface up to 2.17 inches (55 mm) thick or use a direct-drill mount. Shure lists up to 33 inches (838 mm) of extension, 360-degree horizontal rotation, 90-degree upper vertical adjustment, and a maximum capacity of 4.4 lb (2 kg). The page identifies the threaded extension as useful with Shure SM7 and MV7 series microphones and states compatibility with Shure and third-party microphones. Confirm the desk edge, chosen mounting method, mic weight, and thread fit. Shure also documents cable channels and lists a three-inch extender for SM7B/SM7dB microphones; check the exact product listing for what is included. [Shure SH-BROADCAST2]
For a desk arm with a stated Shure fit: Gator SH-BROADCAST1
Shure lists the SH-BROADCAST1 with a clamp for surfaces up to 2.17 inches (55 mm), 360-degree rotation, and up to 32.25 inches (940 mm) of extension. Its threaded extension adapter is named as compatible with the SM7B, SM7DB, MV7, MV7+, and MV7X. The microphone is sold separately. Do not treat the SH-BROADCAST1 and SH-BROADCAST2 as interchangeable: their published extension figures differ, and the SH-BROADCAST2 page additionally states a 2 kg load capacity and direct-drill mounting. [Shure SH-BROADCAST1] [Shure SH-BROADCAST2]
Rank #2
- Versatile: Perfect for short-height miking on desktops or floors.
- Compact: Fits easily on desks, tables, and podiums.
- Professional: Durable black finish resists chips and scratches.
- Compatible: Adjusts 9″–13″, mounts standard mic clips and accessories.
Check reach, stability, and fit before buying
- Measure the target position. Record the required height from the floor or desktop and the horizontal distance from the stand’s base or mounting point. Compare both with the published stand and boom ranges; height alone does not tell you whether the mic can reach around a drum or amp.
- Choose a mounting method and make room for it. A clamp arm needs a suitable desk edge and clamp area; the SH-BROADCAST2 also offers direct-drill mounting. A freestanding model avoids attaching to furniture but occupies floor or tabletop space. The K&M 25995 base is 7.87 by 7.87 inches. [Shure SH-BROADCAST2] [K&M 25995 data sheet]
- Match the microphone’s load and boom extension. Shure publishes a 2 kg capacity for the SH-BROADCAST2. For the other listed models, the cited product specifications do not state a load rating. A longer boom extension can affect stand stability by shifting the load; do not assume a stand supports a heavy microphone without a relevant rating or manufacturer compatibility statement. [Shure SH-BROADCAST2] [MusicRadar buying guide]
- Check threads and accessories. The K&M 25950 lists a 3/8-inch connector, while the K&M 25995 lists a 5/8-inch connector. Confirm that the microphone or clip fits, and verify the exact model’s included accessories and regional listing. Do not assume a mic or clip comes with a stand.
- Plan the cable path and clearance. Shure documents cable channels on both Gator arms. Check that the arm, cable, and mic do not obstruct the desk, screen, or nearby equipment in the intended position. [Shure SH-BROADCAST1] [Shure SH-BROADCAST2]
What a short stand can—and cannot—change
A stand can help hold a microphone in a repeatable position. The published specifications cited here establish dimensions, mounting features, and stated compatibility; they do not show that one stand improves sound quality or that any model sounds better than another. Choose the stand to place the microphone where the recording requires it, and assess audio quality separately.
Quick Recap
Rank #4
- Superior Stability: Built with a solid metal base measuring 5.12" in diameter and weighing 1.85 lbs, this desktop microphone stand provides a sturdy, well-balanced foundation that helps prevent tipping, shifting, and unwanted movement during use. Four non-slip rubber pads add extra grip while helping protect your desk from scratches and scuffs.
- Secure Height Adjustment: Easily customize your microphone position from 8.0" to 12.8" to suit different setups and recording needs. The secure screw-in adjustment knob provides a firmer hold than snap-on knobs, helping prevent loosening or sliding over time. Once set, the mic stand for desk stays securely at your preferred height for consistent positioning.
- Strong Load-Bearing: Constructed from high-quality metal, the desktop mic stand supports microphones and accessories weighing up to 3.3 lbs, offering greater capacity than stands with just 2.2 lbs bearing load capacity. Its sturdy construction enables smooth, controlled, and quiet microphone positioning, making it ideal for recording, streaming, podcasting, voiceovers, and live use.
- Universal Compatibility: With a 3/8" to 5/8" adapter, the desk mic stand is compatible with Blue Yeti, Blue Yeti Pro, Blue Snowball, HyperX QuadCast, SoloCast, Fifine, AT2020, Razer Seiren X, and other microphones. The package also comes with a mic clip with a max diameter of 1.26", compatible with dynamic microphones such as Shure SM58, Shure SM48, Samson Q2U, Shure PGA48, etc.
- Portable & Convenient: This compact desktop microphone stand is quick to assemble, easy to reposition, and simple to transport. Its space-saving design fits conveniently into a laptop bag or other carrying case, making it a practical choice for home studios, offices, conferences, churches, presentations, and other public venues.
Rank #3
- Weighted A-frame Base: The CAHAYA mic stand features a weighted base that weighs 4.4 lbs, providing enhanced stability, absorbs vibrations, and reducing the risk of accidental tipping, protecting your microphone and equipment. The bottom of the weighted base is equipped with foam pads to protect your desktop from scratches.
- Strong Load-bearing Capacity: We know that the further the mic stand arm extends and the heavier the mic, the more likely it is to sag or tip. That's why we added a 0.76 lb counterweight at the end of the boom arm to balance the weight of any microphone. Even with a heavy microphone attached, this microphone stand will not tip over! With the arm half-extended, the max weight capacity is 8.8 lbs!
- 2-in-1 Desktop Microphone Stand: Easily detach the boom arm and attach the mic clip to convert CAHAYA desk mic stand from a boom-style to a straight mic stand. Includes two different types of microphone clips, compatible with most microphone designs.
- Easy Height and Boom Arm Adjustment: Thanks to the Adjustable and rotating design, the height of this desktop mic stand can be smoothly adjusted to suit your needs. The quick-release clamp allows for height adjustment between 8.7"and 13" for convenience. The adjustable boom arm extends up to 10.2" and rotates 180°, making it easy to position with the adjustment knob.
- Enhanced Compatibility: Our boom mic stand fits microphones with diameters from 0.98" to 1.38", thanks to its standard 5/8" adapter threading. It providing a highly adaptable solution for microphones. Tip: To use the adapter, pls take a coin, and insert it into the groove on the bottom of the microphone clip, turn it counterclockwise, then you will get adapter from 3/8" to 5/8".
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
