iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
The Aqara Presence Multi-Sensor FP300 combines PIR motion and 60 GHz mmWave presence sensing with light, temperature, and humidity readings in a battery-powered device. Its fit depends less on the feature list than on your smart-home setup: Thread requires a Thread-enabled Matter controller, while Zigbee with an Aqara hub enables additional Aqara Home controls. Aqara publishes range and battery-life figures, but the available evidence does not independently verify real-room performance or longevity.
What the FP300 senses
Aqara describes the FP300 as a five-function sensor: PIR motion, mmWave presence, ambient light, temperature, and humidity. The combination is intended to distinguish presence from motion, but the product description alone does not establish how reliably it detects a person sitting still in a particular room.
Aqara specifies a maximum detection range of 6 m and a 120° field of view. These are manufacturer specifications, not independently measured coverage results; room layout and placement should not be assumed to match the published maximum.
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Scan for outdated or missing drivers - takes under a minute3Clear out junk files and repair common Windows errorsAqara’s product page describes it as “combines PIR and 60 GHz mmWave radar for ultra-precise presence detection, covering up to 6 meters with a wide 120° field of view.” That wording is a vendor claim, not an independent performance verdict.
#1 Best Overall
- [Precise AI-Powered Presence Sensor] Powered by advanced AI, PIR, and 60GHz mmWave radar, the FP300 accurately detects human presence even when you’re still. Its adaptive AI learning continuously optimizes sensitivity to reduce false triggers, ensuring lights and devices stay on even when you’re lounging on the couch, and off when they need to be.
- [Broad Compatibility] Supports Matter over Thread and Zigbee for seamless integration with major ecosystems. Works with Apple Home, Home Assistant, Alexa, Google Home, SmartThings, and Homey via Matter for flexible, reliable automation. (* For third-party Matter ecosystems, a corresponding Thread Border Router and Matter Controller are required. * For Aqara, a Zigbee 3.0 or Matter hub like M2/M3/G410/etc, except G2H, with the latest firmware is needed.)
- [5-in-1 Multi-Sensor] Combines 60GHz mmWave, PIR, light, temperature, and humidity sensors into one compact device. This all-in-one design enables precise detection of presence and environmental conditions, helping automate lighting, climate control, and security systems for a smarter and more energy-efficient home.
- [Long Battery Life & Energy Efficiency] Powered by two replaceable CR2450 batteries, the FP300 offers up to 3 years of battery life in Zigbee mode or 2 years in Thread mode. Optional sensor deactivation helps conserve energy, ensuring consistent and long-lasting performance. What's Included: FP300 Multi-Sensor × 1, Sticker × 1, User Manual × 1
- [Wire-Free & Flexible Installation] Completely wireless with a multi-axis adjustable mount for easy wall, ceiling, or corner setup. No wiring required—relocate anytime for optimal detection and coverage. Featuring a 120° field of view and up to 6 m (20 ft) of detection range, the FP300 can effectively monitor various room layouts. Its minimalist design blends seamlessly into any modern interior, delivering powerful functionality without visual clutter.
Thread or Zigbee: choose based on your setup
The FP300 supports both protocols, but the setup and available controls differ. Aqara says Thread mode connects through a Thread-enabled Matter controller. In Zigbee mode, an Aqara hub provides Matter compatibility through its bridge function and unlocks additional configuration in Aqara Home.
| Mode | What you need | What Aqara says it enables |
|---|---|---|
| Thread | A Thread-enabled Matter controller | Connection with platforms through Matter; Aqara does not list the additional Aqara Home controls available in Zigbee mode for this setup. |
| Zigbee | An Aqara hub | Matter compatibility through the hub’s bridge functionality and Aqara Home controls such as detection range, absence delay, reporting frequency, and disabling individual sensors. |
If you already have a Thread-enabled Matter controller and want a Matter-based setup, Thread may suit your existing system. If you want the listed Aqara Home configuration options, choose Zigbee with a compatible Aqara hub. Confirm the exact hub, controller, region, and integration requirements for your intended setup; platform compatibility does not mean every feature is exposed the same way everywhere.
Rank #2
- [Installation Method] With the new installation method for the FP2, you can now mount it in the corner of a room. Just attach the included angle mount and switch to the corresponding mode in the app. This setting eliminates dead zones caused by the sensor’s angle and rotates the room layout by 45 degrees, allowing for enhanced zone detection and more automation options.
- [Multi-Person &Zone Positioning] The Aqara Presence Sensor FP2 can simultaneously detect up to 5 people and trigger different scenarios and automation.Moreover, the FP2(2.4GHz Wi-Fi REQUIRED) offers significant advantages over PIR infrared motion sensors by using a single radar sensor to monitor rooms of up to 40 m² (430 sq ft). You can also divide it into up to 30 zones, such as sofa, bed or desktop, etc. and set up individual automations for each zone. It is like having several PIR sensors at the same time with one Presence Sensor FP2. Please note: the FP2 is a wired sensor that should be constantly powered.
- [Sleep monitoring& Fall Detection] You can install FP2 next to the bed and select the sleep monitoring mode to sense the human body's sleep status in real time and generate a sleep health report.Moreover, you also can mount the FP2 on the ceiling and choose the Falling Detection Mode, which will detect and alert you through the app if someone falls. (Note: The FP2 is not a medical device, and can only be used for notification purposes)
- [Multi-Ecosystem Support] The Aqara Presence Sensor FP2 is exposed as multiple sensors to HomeKit, Alexa, Samsung SmartThings and Home Assistant. (Note: The device can be added directly to Home Assistant using HomeKit Controller integration) You can integrate the sensor easily without requiring an Aqara hub, which is a great solution for smart home enthusiasts. For a stable connection, ensure the sensor is placed within 6 meters (19 feet) of your router.
- [Ultra-High Precision, Privacy, and Enhanced Features]By implementing millimeter-wave radar technology, the Presence Sensor FP2 provides precise detection of movement without false negatives, even for slight movements. No camera monitoring system maximizes privacy. With IPX5, it can be installed in wet environments. Additionally, it has a built-in light sensor for flexible lighting automations (Only available in Aqara Home, HomeKit, and IFTTT). Automations of FP2 are executed without sending to the cloud and will keep working even if there is no internet connection.
Platform compatibility depends on the integration
Aqara’s US product listing names Apple Home, Google Home, Alexa, SmartThings, Home Assistant, and Homey as compatible platforms. The connection path still matters: Aqara describes Thread integration through a Thread-enabled Matter controller and Zigbee integration through an Aqara hub. Check whether your particular controller or hub supports the functions you need rather than relying on the platform name alone.
The Tool Desk
Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →Battery life: Aqara’s estimates and their conditions
The FP300 uses two CR2450 batteries. Aqara claims up to three years in Zigbee mode and up to two years in Thread mode. On its EU product page, Aqara says those estimates are based on Aqara Laboratory tests reporting about 240 daily data points and four hours of presence, with the light, temperature, and humidity sensors operating. Aqara cautions that actual battery life varies with settings and usage.
Rank #3
- WiFi Connected, No Hub Required: The mmWave presence sensor operates seamlessly without a gateway, relying solely on a 2.4GHz Wi-Fi connection. Compatible with Alexa and Google Assistant, but doesn't support SmartThings and IFTTT. With a wired design ensuring stable power, it operates on 5V 1A USB power, eliminating the hassle of frequent battery changes. The communication range reaches about 263ft without obstacles
- Ultra-High Precision Detection with More Privacy: Utilizing millimeter-wave radar technology, our human presence sensor accurately detects various movements, micro-movements, and stationary states, such as breathing or turning over. This ensures that lights won't unexpectedly go out during stationary activities like reading or toileting, without the need for a camera monitoring system, preserving user privacy
- Advanced Sensing and Instant Alert: The 24GHz mmWave Radar smart sensor excels at detecting subtle movements, offering higher accuracy than PIR (not a presence sensor). It promptly sends alerts to your smartphone upon detecting unusual motion, enabling you to conveniently review 30-day activity logs through the app, regardless of your location
- Customized Whole Home Automation: Utilize this motion sensor indoor as a motion-activated wall switch to automate various routine tasks by configuring "IF" conditions and corresponding "THEN" actions. For example, Reading Mode adjusts brightness, Child Monitoring Mode activates surveillance for safety, Energy Saving Mode minimizes consumption during the day. The seamless collaboration of these modes delivers users a precise and personalized smart home experience
- Flexible Installation and Extensive Detection Range: The wifi presence sensor features a magnetic base that allows for 45° folding and 360° rotating, allowing you to mount it on the wall or ceiling with a maximum detection range of 20ft. Avoid installing it near swinging plants, moving metals, or fluttering curtains to prevent false detections. Note that the human sensor is not waterproof or moisture-proof, so ensure it’s installed in a dry area for long-term durability
Aqara says disabling individual sensors to extend battery life requires Zigbee mode with an Aqara hub. The “up to” figures should therefore be treated as manufacturer estimates under stated test conditions, not a guarantee for every home or configuration.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Size and operating range
Aqara’s US specifications list dimensions of 42 × 42 × 50 mm, weight of 82 g, and an operating temperature range of −10 °C to 50 °C. These are listing specifications; they do not establish how the sensor will behave in a particular room or replace installation guidance.
Rank #4
- 【WiFi Presence Sensor】No Hub Required - just via 2.4 GHz WiFi for app remote control, free app alerts, detect moving/non-moving people, recording history. Including illuminance value: 0 to 3000 Lux; detection range setting: 0 to 6 m; motion sensitivity setting; detection angle: >90º. Compatible with Tuya/Smart Life for scene linkage. Share with your family, real-time monitoring of the state of home security in your home (Supports 2.4G WiFi only).
- 【Wave Radar Detection Sensor】Millimeter-wave radar detection technology can be utilized to accurately detect human body presence, human body static, human body micro-movement and human body movement motion detection. Wifi Motion Sensor can not only be used to detect moving, but also non-moving people. Wifi Human Presence Sensor detect micro & macro motions enables you to detect human presence/human body movement.
- 【Smart Automation】Use Smart Life App/TUYA to create favourite scene program, when detecting movement in the set scene, it will trigger the corresponding task, such as "someone passes by" "tuya smart light turn on automatically", when you come home, WiFi presence sensor senses the movement and the light turn on automatically, to achieve the scene linkage,to help the realisation of smart life.
- 【5 Scene Modes】Different modes for different occasions: Default,Passageway, Living, Bedroom, Bathroom. eMylo Motion Detecter is widely used in, security, homes, hotels, garages, buildings, transportations and other Transportation and other industries that need to detect human micro motion, motion and control detection distance.
- 【Service & Tips】Provide 24-hour Customer Service. Note: The Smart Human Presence Detector is a wired sensor powered by USB (included) that should be constantly powered. Tips: Near to a wireless network connection the faster it will pair! If pairing fails or you need to re-pair, just press the black button on the back of the sensor and the light blinks to re-pair.
What this review can—and cannot—establish
The available product information is manufacturer material, including Aqara’s own FP2-versus-FP300 comparison. It does not establish independent long-term reliability, false-trigger rates, actual battery duration, room-to-room coverage, or controlled comparative performance. In particular, the combination of mmWave and PIR supports Aqara’s stated presence-detection design, but does not independently prove reliable detection of a still person in every room.
Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Repair Windows errors before they cause bigger problemsFix Now →For a comparison with the FP2 or another presence sensor, assess the sensing method and documented stillness behavior, power and placement needs, stated coverage, protocol and controller requirements, available configuration and readings, and independent reliability evidence. Aqara’s comparison article can explain how the manufacturer positions its own models, but it is not independent testing.
Who should consider the FP300?
- It may fit: a setup where combining presence and motion detection with light, temperature, and humidity sensing is useful, and where you already have—or plan to add—the required Thread controller or Aqara Zigbee hub.
- Check carefully first: if your decision depends on still-person detection in a challenging room, proven real-world coverage, or a predictable battery replacement interval. Those outcomes are not independently established by the available evidence.
- Choose Zigbee with an Aqara hub if Aqara Home controls such as detection range, absence delay, reporting frequency, or disabling sensors are important to you.
- Choose Thread if your intended Matter setup includes a Thread-enabled controller and the additional Aqara Home controls are not essential.
Before buying, verify compatibility for the exact regional product, controller or hub, and platform integration you intend to use.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
