Recommended Free Tools
Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Start with the PS5’s automatic display settings, then enable HDR, VRR, 120 Hz output, and ALLM when your display and game support them. These options can improve the signal sent to your screen or reduce display-side processing, but they do not guarantee a game will render at its highest resolution or frame rate. Sony notes that the result depends on the entire entertainment setup: PS5 video output settings.
Recommended PS5 display settings
| Setting | Recommended choice | What to know |
|---|---|---|
| Resolution | Automatic | The PS5 detects the TV’s capabilities and selects the best available resolution. Change it when troubleshooting or when you deliberately need a supported output such as 1440p. 4K requires a compatible screen and output configuration; Sony describes it as nearly four times the definition of 1080p HD. Sony’s resolution guide. |
| HDR | On When Supported | Unsupported games and apps remain in SDR. Always On converts SDR content to HDR output, which may not suit every display or viewer. Use Adjust HDR to calibrate brightness for your own screen; there is no universal calibration value. Sony’s HDR settings guidance. |
| VRR | Automatic | On supported TVs and games, variable refresh rate adjusts the display refresh rate in real time. Apply to Unsupported Games is optional; Sony advises turning it off if you encounter unexpected behavior. Depending on content frequency, VRR can cause slight brightness fluctuations on some BRAVIA TVs. PS5 VRR settings; Sony BRAVIA VRR guidance. |
| 120 Hz Output | Automatic | Allows supported games and displays to use 120 Hz output. It does not make every game run at 120 frames per second. Turn it off if it causes video-output problems with your monitor or TV. Sony’s 120 Hz guidance. |
| ALLM | Automatic | A compatible TV can switch to low-latency mode while you play. VRR output may engage low-latency behavior even if ALLM is Off; to disable that behavior completely, disable VRR as well. The PS5 needs current system software and does not send an ALLM signal while a media app is running. Sony’s ALLM guidance. |
| Video Transfer Rate | Automatic | If the picture flickers, test -1 or -2. These settings limit some combinations of 4K, 120 Hz, and color formats, so they are troubleshooting options rather than general picture enhancements. Sony’s video transfer rate guidance. |
| Deep Color Output | Leave at its default/Automatic setting | Change only if troubleshooting a specific compatibility issue. Sony’s output settings guide. |
| RGB Range | Leave at its default | Change it only if the connected HDMI device reports the RGB range incorrectly. Sony’s RGB Range guidance. |
| Adjust Display Area | Leave unchanged unless needed | Use it only when the image is cropped or surrounded by a border. Sony’s display-area guidance. |
How to set up HDR, VRR, 120 Hz, and ALLM
On the PS5, open Settings > Screen and Video > Video Output. Choose the options below where available; menus or available choices can vary with the connected display and console capabilities.
- Set Resolution to Automatic.
- Set HDR to On When Supported, then select Adjust HDR and follow the on-screen calibration for your display.
- Set VRR to Automatic. Enable Apply to Unsupported Games only if you want to try it, and turn it off if it causes unexpected behavior.
- Set 120 Hz Output to Automatic and ALLM to Automatic when both are offered and supported by your TV or monitor.
- Leave Video Transfer Rate on Automatic unless flicker prompts you to test -1 or -2.
These settings make compatible output possible; the game and display still determine which modes actually work. For example, a 120 Hz signal option is not a promise that a particular title renders 120 frames per second.
Why an HDR picture can look washed out
HDR appearance depends on the specific display and calibration, so a single PS5 setting cannot guarantee that every screen will look right. Use On When Supported to avoid forcing HDR output for SDR games and apps, then run Adjust HDR for the screen in use. If the picture remains unexpectedly washed out, avoid changing RGB Range unless the HDMI device is reporting it incorrectly; mismatched range settings can make the image look wrong rather than improve it.
The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
#1 Best Overall
Elebase USB to USB C Adapter for iPhone 18 Pro Max,USBC Car Charger Adapter
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
How to get 4K at 120 Hz
When 4K/120 Hz is unavailable, check the full signal path rather than assuming the console is defective. Sony recommends the HDMI cable included with the PS5 or an Ultra High Speed HDMI cable for 4K/120 Hz. If your included cable is working, there is no need to replace it just because you are changing display settings.
- Confirm that the TV or monitor supports the desired 4K/120 Hz signal.
- Update the display firmware, then check the manual for which HDMI port supports the feature and whether a TV-specific HDMI format setting must be enabled.
- Connect the PS5 directly to that port for a test, or check whether a receiver or other intermediary supports the same signal.
- On the PS5, check Settings > Screen and Video > Video Output and leave Resolution and Video Transfer Rate on Automatic while troubleshooting.
- If VRR is part of the setup, enable the display’s VRR HDMI format where applicable. Sony says HDMI port locations and available formats vary by TV model and region; the BRAVIA guidance applies to listed models BRAVIA 9, BRAVIA 8, BRAVIA 8 II, BRAVIA 7, BRAVIA 5, and A95L, not necessarily other Sony displays or brands. Check Sony’s BRAVIA HDMI and VRR guidance.
What to check before changing a setting
- Confirm display support: 4K resolution, 120 Hz input, VRR, ALLM, HDR, compatible HDMI ports, and restrictions when features are combined are separate capabilities. An HDMI version label alone does not establish that every feature works. Check the display manual and model-specific documentation.
- Keep troubleshooting changes targeted: use -1 or -2 Video Transfer Rate for flicker, RGB Range for an incorrect reported range, and Adjust Display Area for cropping or borders. These are not general image-quality upgrades.
- Account for feature interactions: VRR can trigger low-latency behavior even with ALLM Off, and VRR may produce slight brightness fluctuations on some BRAVIA displays depending on content frequency.
- Check console model limits: 8K output and Enhance PSSR Image Quality are available only on PS5 consoles in the CFI-7000 model group. 8K requires a display supporting 8K at 60 Hz with Display Stream Compression; VRR is disabled during 8K output, and Sony notes other feature limitations. Verify the console model and display documentation before expecting these options.
Sony Interactive Entertainment describes the automatic resolution behavior this way: “Your PS5® console detects your TV’s capabilities and automatically selects the best available resolution.” PlayStation Support.
Quick Recap
Bestseller No. 5
Best Value
Anker USB C Hub, 5-in-1 USBC to HDMI Splitter with 4K Display
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Rank #4
Sale
UGREEN USB to USB C Adapter Combo 4-Pack, 10Gbps USB C Converter Space Gray
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Rank #3
Sale
Anker USB C Hub, 7in1 Multi-Port USB Adapter, 4K@60Hz USBC to HDMI Splitter
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Rank #2
Anker USB-C Hub, 5-in-1 USB Hub for Laptops, 4K HDMI Multiport Adapter
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
