The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
To stream a Wirecast production to BoxCast, schedule a broadcast in the BoxCast Dashboard, then send Wirecast’s output using a BoxCast RTMP or SRT source. You can also route Wirecast’s secondary display output to a BoxCaster hardware encoder. For most software-only setups, RTMP is the simpler path; choose SRT if your BoxCast source and Wirecast installation are configured for it. BoxCast’s Wirecast-specific guide recommends starting Wirecast two to three minutes before the scheduled start so you can confirm the feed.
Before you connect Wirecast
- Schedule the broadcast in the BoxCast Dashboard before using the documented direct RTMP or SRT workflows.
- Create or select the matching BoxCast source and keep its connection details private. Do not show a live stream key in screenshots or share it publicly.
- Check the installed Wirecast version’s protocol support. BoxCast says its generated RTMP URLs default to RTMPS, while standard Wirecast versions do not support RTMPS; if your version cannot connect using RTMPS, BoxCast instructs you to remove the “s” and use the RTMP URL form.
- For third-party RTMP ingestion, use H.264; BoxCast’s general RTMP guidance says H.265/HEVC is not currently supported.
BoxCast’s Wirecast-specific instructions are in its Wirecast + BoxCast guide. For creating a source, see Add a New RTMP Source and Add a Source (Encoder) in the BoxCast Dashboard.
Method 1: Send Wirecast to BoxCast over RTMP
- Create or select the BoxCast RTMP source. In the BoxCast Dashboard, open Sources and create or select an RTMP source. Copy the source’s Server URL and Stream Key.
- Set Wirecast’s destination. In Wirecast, open Output > Output Settings and set Destination to RTMP Server.
- Enter the connection details. Paste the BoxCast server URL into the address field and the stream key into the stream field. If your Wirecast interface uses one combined URL field, follow its format for the server URL and key. Save the destination if you will reuse it.
- Start the encoder and check the feed. Schedule the BoxCast broadcast, then press Stream in Wirecast. BoxCast says the broadcast can go live at its scheduled time even if the encoder starts sending earlier. Its Wirecast-specific guide recommends starting two to three minutes early.
If Wirecast will not connect to the RTMP server
Check whether the URL begins with rtmps://. BoxCast says its generated RTMP URLs use RTMPS by default and that standard Wirecast versions do not support it. If your installed Wirecast version lacks RTMPS support, use the RTMP form by removing the “s”—for example, BoxCast gives rtmp://rtmp.boxcast.com/live instead of rtmps://rtmp.boxcast.com/live. Verify your version’s capabilities before changing the URL.
Method 2: Send Wirecast to BoxCast over SRT
- Open the BoxCast SRT source settings. In the BoxCast Dashboard, open Sources, select the SRT source, and open its Wirecast configuration values.
- Choose SRT in Wirecast. Open Output > Output Settings and set the destination to SRT: Secure Reliable Transport.
- Copy the source parameters. Enter the Dashboard’s Address, Port, Passphrase, and Stream ID. Leave the passphrase blank if encryption is disabled.
- Set the audio format. Configure encoder audio as stereo, 48 kHz. BoxCast warns that other values can result in no audio or audio that sounds incorrect to viewers.
- Schedule and start. Schedule the BoxCast broadcast, then start Wirecast early enough to confirm that the feed is ready. BoxCast’s Wirecast-specific guide recommends two to three minutes before the scheduled start.
Method 3: Use Wirecast with a BoxCaster
This optional hardware route sends Wirecast’s program output from a secondary display output to a BoxCaster. BoxCast says its hardware encoder handles video and audio encoding for the computer and can use BoxCast communication protocols; it also gives BoxCast support additional broadcast data and logs. You do not need a BoxCaster to use the direct RTMP or SRT methods.
Recommended: Update Every Outdated Driver on Your PC in One Scan - Free →Recommended: PC Feels Slow? A Free Scan Shows What's Dragging Windows Down →Recommended: Crashes or Glitches? A Free Driver Scan Usually Finds the Culprit →
Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
#1 Best Overall
Elebase USB to USB C Adapter for iPhone 18 Pro Max,USBC Car Charger Adapter
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
- Connect the computer’s compatible video output to the BoxCaster. Confirm the computer’s output, the BoxCaster input, and cable compatibility before relying on this setup. An HDMI cable may be appropriate for this hardware connection, but it is not required for direct RTMP or SRT.
- In Wirecast, open Output > Multi-Viewer Output > Configure Displays.
- Set the output monitor to 1920×1280, choose Full Screen, set labels to Do Not Draw Labels, select Live, and choose the appropriate display output.
- Confirm the BoxCaster receives the intended Wirecast program output, then follow the BoxCast broadcast workflow for the hardware source.
These display settings are from BoxCast’s Wirecast + BoxCast instructions. Verify that the selected output and physical connection match your equipment.
Which connection method should you choose?
| Method | What you enter or need | Best fit |
|---|---|---|
| RTMP | BoxCast server URL and stream key; verify RTMP/RTMPS compatibility and use H.264 for third-party RTMP ingestion. | A direct software connection when your BoxCast account provides an RTMP source. |
| SRT | Address, port, stream ID, and passphrase when encryption is enabled; stereo audio at 48 kHz. | A direct software connection when an SRT source is available and you can configure its required parameters. |
| BoxCaster | A compatible secondary video output and BoxCaster hardware; configure Wirecast’s display output. | Operators who already have the hardware or want the hardware encoder’s operational advantages described by BoxCast. |
BoxCast’s setup pages do not provide a controlled benchmark establishing one method as best for every broadcaster. Your choice depends on source availability, protocol compatibility, the computer’s available encoding capacity, and whether you already have compatible BoxCaster hardware.
Rank #2
Anker USB-C Hub, 5-in-1 USB Hub for Laptops, 4K HDMI Multiport Adapter
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Troubleshooting Wirecast-to-BoxCast streams
- The broadcast is not scheduled or does not go live: Confirm that you scheduled the broadcast in the BoxCast Dashboard and selected the source associated with that broadcast. Start Wirecast before the scheduled time and check the incoming signal.
- RTMP connection fails: Recheck the server URL and stream key against the BoxCast source. If the URL is RTMPS, confirm that your Wirecast version supports it; if it does not, BoxCast advises using the RTMP form by removing the “s.”
- There is no audio or it sounds wrong over SRT: Set Wirecast encoder audio to stereo at 48 kHz, as specified in BoxCast’s Wirecast SRT guide.
- RTMP video is rejected or unavailable: Check the codec. BoxCast’s general RTMP encoder guidance says third-party RTMP ingestion supports H.264, not H.265/HEVC.
- The BoxCaster shows the wrong picture or no picture: Confirm the chosen display output, selected Live output, full-screen configuration, and physical connection. Make sure the computer and encoder support the selected connection.
- You are unsure how early to start: BoxCast’s Wirecast-specific guide recommends two to three minutes early. Its general RTMP guide recommends ten to fifteen minutes; these are recommendations in different contexts, not a single universal timing requirement. For this Wirecast pairing, use the Wirecast-specific guidance and allow time to check the signal.
Or let it run in the cloud
Wirecast-to-BoxCast is the path for a live production sent to BoxCast. If your goal instead is to keep a prerecorded YouTube channel live around the clock, StreamNeo is a separate YouTube-only service: upload a recording or build a playlist, add your YouTube stream key, and go live. It loops the uploaded video from the cloud, so nothing has to stay on at home. StreamNeo keeps the uploaded quality up to 4K 60fps at one flat price per slot, automatically recovers if YouTube drops the stream, and offers the first day free with no card. Monthly: $9.99 per month. Learn more at StreamNeo, or start the free first day.
Quick Recap
Bestseller No. 5
Best Value
Anker USB C Hub, 5-in-1 USBC to HDMI Splitter with 4K Display
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Rank #4
Sale
UGREEN USB to USB C Adapter Combo 4-Pack, 10Gbps USB C Converter Space Gray
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Rank #3
Sale
Anker USB C Hub, 7in1 Multi-Port USB Adapter, 4K@60Hz USBC to HDMI Splitter
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
Recommended Free Tools
Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
