What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Usually, yes—but only if that specific Cat6 plug is made for your Cat5e cable’s conductor type, wire size, insulation diameter, and jacket diameter. A Cat6-rated plug does not upgrade Cat5e cable to Cat6; it is simply a termination component that may work when its specifications match the cable.
What “Cat6 plug” means
Cat5e and Cat6 Ethernet commonly use the same style of eight-position modular plug, widely called an RJ45 plug and more precisely described as an 8P8C connector. The category label describes the plug’s performance and the cable types its manufacturer specifies—not a different Ethernet protocol or a guarantee that the plug fits every cable.
Both Cat5e and Cat6 patch-cord products are offered with RJ45 connectors; see Belden Cat5e patch cords and Belden Cat6 patch cords. A Cat5e cable fitted with a Cat6-rated plug remains Cat5e cable. The performance of the finished link depends on the cable, terminations, other link components, installation, and the applicable channel limits.
Check these four compatibility details
1. Solid or stranded conductors
Solid-conductor cable is common in permanent in-wall runs; stranded cable is more flexible and common in patch cords. A plug must be designed for the conductor construction in your cable. Some plugs support both, but do not assume that from the Cat6 label. For example, Leviton’s EZ-RJ45 Cat6 plug specification says it supports solid and stranded cable, while Panduit’s field-terminable plug documentation lists separate termination ranges for solid and stranded conductors.
Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstall#1 Best Overall
- Reliable RJ45 Connector for Custom Cabling: These Cat 6 pass through RJ45 connectors are ideal for building custom-length Ethernet cables. Designed for solid or stranded UTP cables, these Cat6 ends support 23-24 AWG wire with 0.97 to 1.07mm insulated conductors and an outside diameter up to 6.1mm.
- Efficient and Secure Cat6 Cable Connection: These Cat6 pass through connectors use a three-point staggered contact for a secure and stable connection. Feed wires through the Cat6 RJ45 pass through connector and crimp, saving time and reducing effort in cable termination.
- Cat 6 Connectors with Gigabit Performance: These Cat6 connectors are rated for 10 Gigabit Ethernet and are backward compatible with Cat 5e cables, delivering top performance. The passthrough RJ45 connectors feature 50μ gold-plated contacts for superior conductivity, enhanced corrosion resistance, and long-lasting performance in high-quality Cat6 cable terminations.
- Value Pack of 100 Cat 6 RJ45 Connectors: This 100-pack of Cat6 pass through connectors is perfect for large projects or multiple installations. Ideal for routers, patch panels, and workstations, these Ethernet connectors (Ethernet ends) work seamlessly with Cable Matters RJ45 Strain Relief Boots for extra durability.
- Portable Storage and Easy Organization: Keep your RJ45 Pass Through connectors neatly organized with the included storage jar, featuring a screw-on lid for secure and convenient access. Each RJ45 connector is designed for reliable, long-term performance, making it ideal for both professional installers and DIY Ethernet cable terminations.
2. Conductor gauge
Match the cable’s wire gauge to the plug’s stated range. Cat5e cable is available in different conductor sizes, so a plug that accepts one gauge may not properly terminate another. Belden, for example, lists a 22–26 AWG conductor range for its Cat5e shielded field-terminable plug. Always check the specification for the exact model you have.
3. Individual insulation diameter
The insulated conductors must fit the plug’s wire channels or load bar. Insulation that is too large may not seat or align; insulation that is too small may not be held or contacted reliably. Leviton specifies an insulated-conductor diameter of 0.037–0.042 in. (0.94–1.07 mm) for its cited plug. Panduit documents variants for 0.85–1.0 mm and 1.0–1.6 mm insulation diameters, illustrating why model-specific dimensions matter: Panduit plug specifications.
4. Overall cable and jacket diameter
The cable must pass through the plug opening and its jacket must be captured by the strain relief. For its cited EZ-RJ45 plug, Leviton lists a maximum cable outside diameter of 0.275 in. (6.985 mm). Other plugs have different limits; consult the exact model’s specification.
Rank #2
- Enhanced Connectivity: Our Cat 6 RJ45 pass-through connectors are designed to terminate unshielded twisted pair cables, supporting 24-26 AWG round or flat stranded wires, accommodating up to 6.1mm outer diameter; CAT6 23awg is supported for solid cable only
- Efficient Termination: Crimp style Cat6 pass-through connectors feature a three-point staggered contact for a robust connection. Effortlessly feed wires through and crimp for quicker, easier terminations with less manual effort
- Optimal Performance: Rated for Gigabit Ethernet networks, these Category 6 connectors are backwards compatible with Cat 5e cables. Gold-plated contacts ensure superior signal integrity and corrosion resistance
- Superior Construction: Our RJ45 connectors feature a three-layer pin structure. The pins are made of pure copper, coated with nickel for protection. At the contact points, a gold layer ensures reliable signal transmission. The entire pin is not fully gold-plated
- Durable and Secure Packaging: Our connectors come in sealed, pull-ring packaging that protects against humidity and water, ensuring reliable performance and speed with every use
Also match shielding and installation use
Use an unshielded plug with U/UTP cable. For F/UTP, S/FTP, or other shielded cable, use a compatible shielded plug and a complete system with appropriate bonding and grounding. A shielded plug alone does not make an unshielded cable shielded.
Recommended Free Tools
For in-wall cable, the plug does not change the cable’s jacket or fire rating. Keep the cable suitable for its location—such as CM, CMR, CMP, LSZH, outdoor, or direct-burial applications—and verify that the plug is approved for the cable construction. Leviton’s cited EZ-RJ45 specification, for example, identifies indoor LSZH, CM, CMR, and CMP cable constructions and calls for evaluating outside-plant and industrial cable combinations for application suitability.
Choose the right termination for the cable
If you are repairing a short, flexible patch cable, a modular plug matched to its stranded conductors may be appropriate. For permanent solid horizontal cable, the usual structured-cabling approach is to terminate into a keystone jack or patch panel, then connect the device with a factory-made stranded patch cord. A male plug on solid in-wall cable can work when the plug is explicitly rated for it, but movement at the plug can stress the conductors.
Rank #3
- 100 Cat6 RJ45 Connector:These Cat 6 connectors fit to standard RJ45 port devices and are designed for solid or stranded unshielded twisted pair (UTP) cables,these Cat6 ends support round or flat stranded cables from 24 to 26 AWG gauge.
- Efficient and Secure Cat6 Cable Connections:Ethernet connectors feature three-pin contact tabs for precise penetration of the core,ensuring reliable,high-performance connections for Gigabit Ethernet networks.
- Gigabit Performance Category Cat6 RJ45 End:Compliant with Gigabit Ethernet standards, these Cat6 RJ45 ends are backward compatible with CAT5E cables.The gold-plated contacts enhance signal integrity and corrosion resistance for long-term reliability.The transparent housing enables intuitive visual checks of indicator status, facilitating real-time network monitoring.
- Operation:The wire can not be directly through the RJ45 connectors, you need to cut the first flush, in order to arrange,and then push the cable into the Cat6 connector until the deepest position, use crimping pliers for crimping. Note:This interface is not RJ45 straight-through type.For straight-through interface, please check our other products (ASIN: B08HLH4RH3/B08HLJJT9D).
- Portable and Reliable:100 RJ45 Connectors is small and portable for large projects or multiple installation scenarios.Designed for computers,hubs,routers,switches.
A Cat5e-specific plug is not automatically better than a Cat6 plug, and a higher category number is not automatically safer. Prefer the exact plug model whose specifications match the cable; for certified commercial cabling, follow the approved component system and warranty requirements.
Wire the plug using T568A or T568B
The plug category does not change the pinout. Use T568A or T568B according to the existing installation; T568B is common, but neither scheme is universally required. Use the same scheme at both ends of a normal Ethernet cable. Deliberately using different schemes creates a crossover cable, which is rarely needed for ordinary home networking.
Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Repair Windows errors before they cause bigger problemsFix Now →For T568B, with the plug contacts facing up and the latch on the underside, the conductor order from left to right is:
Rank #4
- Cat6 Performance: The UTP RJ45 pass thru connectors support 24 to 26 AWG solid or stranded cables with outer diameter 0.93 mm to 1.04 mm, CAT6 23 AWG is supported for solid cable only. Suitable for devices with standard RJ45 ports such as PC, Hub, Router, Switch, etc
- High Quality Construction: The contacts are made of Phosphor Bronze with gold-plated, anti-oxidational and durable. 3-Prong contact blades can more accurately pierce the wire than 2-prong blades, ensure more stable and high data transfer speed. The transmission speed can up to 10Gbps (Cable length limit to 35m-55m), 1000 Mbps Cable length can up to 100m
- Pass-Through Design: Easy to use, allows the wires to pass through the connectors, so the twists in each pair can be pulled close to the contacts than conventional plugs. And you can check the wire sequence a second time, avoiding wire sequence errors
- DIY Your Cat6 Cables Safely: You can make category 6 cables in preferred lengths quickly and easily by using VCE RJ45 ends. Our cat6 connectors with UL Listed are flame retardant, and safer to use in computer rooms, offices, and homes. Note: you need an end pass-thru crimper (sold separately) to install these plugs
- Package Contents: You will get 25 x Cat6 pass-through unshielded plugs and 1 x operating instruction for easy installation and setup of your networking cables
- White/orange
- Orange
- White/green
- Blue
- White/blue
- Green
- White/brown
- Brown
Follow the plug maker’s instructions for its particular orientation and wire manager; verify the order before crimping rather than relying on color order remembered from another plug style.
Terminate without sacrificing pair geometry
- Cut back crushed, kinked, or previously crimped cable to an undamaged section.
- Strip only the amount of jacket specified for the plug, taking care not to nick conductors.
- Untwist each pair only as far as needed to arrange the conductors.
- Place conductors in the chosen T568A or T568B order and insert them fully into the plug or load bar.
- Confirm that each conductor reaches its contact and that the outer jacket extends into the strain-relief area.
- Crimp with the tool specified or approved for that plug. Some pass-through, load-bar, and field-terminable designs require a matching tool; Leviton identifies an associated tool for its EZ-RJ45 design.
- Inspect the result for correct order, seated contacts, jacket capture, and a sound latch.
Test the repair, not just the appearance
A wire-map tester can identify opens, shorts, reversals, and split pairs. A basic continuity result does not certify Cat5e or Cat6 performance, including crosstalk, insertion loss, or return loss. For a critical or high-speed link, use a certifier suited to the intended category or channel.
A properly terminated, compliant Cat5e channel can support ordinary Gigabit Ethernet, but the plug category alone cannot promise a speed. Cable quality and length, pair geometry, termination quality, other jacks or patch panels, switch ports, and installation conditions all matter. If a repair passes a simple pin check but the link falls back to 100 Mbps or drops under load, test the pair map and the complete channel.
Best Value
- Reliable RJ45 Connector for Custom Cabling: These Cat 6 pass through RJ45 connectors are ideal for building custom-length Ethernet cables. Designed for solid or stranded UTP cables, these Cat6 ends support 23-24 AWG wire with 0.97 to 1.07mm insulated conductors and an outside diameter up to 6.1mm.
- Efficient and Secure Cat6 Cable Connection: These Cat6 pass through connectors use a three-point staggered contact for a secure and stable connection. Feed wires through the Cat6 RJ45 pass through connector and crimp, saving time and reducing effort in cable termination.
- Cat 6 Connectors with Gigabit Performance: These Cat6 connectors are rated for 10 Gigabit Ethernet and are backward compatible with Cat 5e cables, delivering top performance. The passthrough RJ45 connectors feature 50μ gold-plated contacts for superior conductivity, enhanced corrosion resistance, and long-lasting performance in high-quality Cat6 cable terminations.
- Value Pack of 50 Cat 6 RJ45 Connectors: This 50-pack of Cat6 pass through connectors is perfect for large projects or multiple installations. Ideal for routers, patch panels, and workstations, these Ethernet connectors (Ethernet ends) work seamlessly with Cable Matters RJ45 Strain Relief Boots for extra durability.
- Portable Storage and Easy Organization: Keep your RJ45 Pass Through connectors neatly organized with the included storage jar, featuring a screw-on lid for secure and convenient access. Each RJ45 connector is designed for reliable, long-term performance, making it ideal for both professional installers and DIY Ethernet cable terminations.
Speed and PoE limits
For 2.5GbE or 5GbE, whether an existing Cat5e channel works depends on its length, noise environment, installation quality, and equipment; the Cat6 plug does not establish that result. Cat5e is not the normal recommended category for a new full-length 10GbE installation. A short existing run may happen to work, but that is not the same as a compliant channel, and a Cat6 plug does not enable 10GbE on Cat5e cable.
A sound eight-conductor termination can carry PoE, but suitability depends on the cable, plug contacts, conductor size, intended power level, temperature, and bundle conditions. Do not assume an arbitrary plug is suitable for high-power PoE. Product ratings are specific: Leviton publishes PoE specifications for its Cat6 patch cords, and Belden publishes product-specific PoE information for its Cat5e patch cords; neither is a universal guarantee for other cable-and-plug combinations.
Quick Recap
Decision guide
| Situation | What to do |
|---|---|
| The plug maker explicitly lists Cat5e compatibility and the cable dimensions and construction fit | Use the plug and its specified tool. |
| The plug is made only for stranded cable, but the Cat5e cable is solid | Do not use it; select a solid-conductor-compatible termination. |
| The cable is too large for the opening or strain relief, or conductor insulation is outside the stated range | Do not force it; choose a matching model. |
| Shielded cable is paired with an unshielded plug | Use a compatible shielded system instead. |
| The cable is permanent solid in-wall horizontal cable | Prefer a suitable keystone jack or patch panel. |
| The cable construction is unknown, or the installation is high-power PoE or warranty-certified | Use a documented compatible system and test or certify as appropriate. |
Common symptoms of a bad match or termination
- No link: Check conductor order, conductor reach, contact seating, cable damage, and plug suitability; retest the wire map.
- 100 Mbps instead of 1 Gbps: Look for an open or poorly terminated pair, a split pair, excessive untwist, or damaged cable; Gigabit requires all four pairs.
- Link drops when moved: Check jacket capture, strain relief, plug fit, conductor stress, and latch condition; reterminate or replace the cable if needed.
- Conductors will not fit: Check insulation diameter, load-bar design, cable separator, and shield construction against the plug specification. Do not force them.
- PoE instability: Check contact quality, connector and cable ratings, current, and heat conditions, especially in bundles.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
