What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
These five Makita tools use two 18V LXT batteries together to power a 36V (18V X2) tool: a rear-handle circular saw, blower, right-angle drill, reciprocating saw and pole saw. The figures below are specifications published by Makita USA, not results from independent or hands-on testing.
What “two 18V batteries” means
Makita describes this platform as 36V (18V X2) LXT. The cited product pages specify a configuration of two 18V LXT Lithium-Ion batteries, used together to power the tool. That is different from a tool that runs on just one 18V battery.
Makita’s XSR01PT page says the setup is “Powered by two LXT® batteries; X2 LXT® technology delivers more power, speed and run time without the hassles of a cord”. That is Makita product marketing, not an independent performance finding. Battery compatibility notes on the cited pages concern Makita 18V LXT batteries and specify Star symbol compatibility. Check the current tool instructions and Makita compatibility information before combining batteries and tools from different generations.
Five Makita tools that use two 18V batteries
1. XSR01PT rear-handle circular saw
For cutting lumber and sheet material, the XSR01PT is a 7-1/4-inch brushless rear-handle circular saw. Makita lists a 5,100 RPM no-load speed and a maximum cutting depth of 2-9/16 inches at 90 degrees. Its listed weight is 12.4 lb with battery. The XSR01PT kit page specifies two 5.0Ah batteries and a dual-port charger. See Makita’s XSR01PT product details.
#1 Best Overall
- No gas, emissions, oil mixing or pull starts
- BL Brushless Motor delivers up to 9,700 RPM
- Lever style lock system allows for quick tool-less installation and replacement of attachments
- High/Low speed button for power and run time management
- Variable speed trigger for controlled speed
2. XBU02PT blower
The XBU02PT is a brushless blower for moving leaves and other debris. Makita lists maximum air volume of 473 CFM and maximum air velocity of 120 MPH; its stated weight is 9 lb with battery. The kit page lists two 5.0Ah batteries and a dual-port charger. These are manufacturer specifications, not a comparison with other blowers under shared test conditions. See Makita’s XBU02PT product details.
3. XAD04PT right-angle drill
For drilling larger holes where a conventional drill may not fit, the brushless XAD04PT has a 7/16-inch hex chuck and two speed ranges: 0–350 and 0–1,400 RPM. Makita lists capacity up to 6-1/4 inches with a hole saw and 4-5/8 inches with a self-feed bit. The listed weight is 13.1 lb with battery. Its PT kit listing includes two 5.0Ah batteries and a dual-port charger. See Makita’s XAD04PT product details.
Rank #2
- Sound pressure rating of 61 dB(A); measured per ANSI B 175.2 standard
- Makita-built motor produces a maximum air velocity of 120 MPH
- 6-stage air velocity/volume selection dial with variable speed control trigger
- Delivers up to 28 minutes of run time at 15,800 RPM using two 18V LXT 5.0Ah batteries (batteries not included)
- Zero emissions and reduced maintenance; no need for gas or oil
4. XRJ06PT reciprocating saw
The brushless XRJ06PT is intended for reciprocating cuts, including demolition work. Makita lists a 1-1/4-inch stroke, up to 3,000 strokes per minute and a maximum wood cutting capacity of 10 inches with a 12-inch blade. The PT kit page lists two 5.0Ah batteries and a dual-port charger. See Makita’s XRJ06PT product details.
5. XAU01PTB pole saw
The XAU01PTB is a brushless 10-inch pole saw for pruning from the ground. Makita lists an overall length of 8 feet, a 3/8-inch low-profile chain pitch, a .050-inch gauge and chain speed of 3,940 feet per minute. The kit listing specifies two 5.0Ah batteries and a dual-port charger. See Makita’s XAU01PTB product details.
Rank #3
- Makita-built 4-pole motor delivers 480 in. lbs. of Max Torque
- Mechanical 2-speed transmission (0-600 & 0-1,900 RPM) for a wide range of drilling and fastening applications
- Features Extreme Protection Technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions
- Dual L.E.D. lights with afterglow illuminate the work area
- Ergonomically designed handle with rubberized soft grip provides increased comfort
How to choose among them
Start with the work, then use the relevant published specifications to narrow the choice. The numbers describe different tasks, so they do not establish which tool performs best overall.
| Task | Tool | Published details |
|---|---|---|
| Cutting lumber or sheet material | XSR01PT circular saw | 7-1/4-inch blade; 2-9/16-inch maximum cut at 90 degrees; 12.4 lb with battery |
| Moving leaves or debris | XBU02PT blower | 473 CFM maximum air volume; 120 MPH maximum air velocity; 9 lb with battery |
| Drilling large holes in framing | XAD04PT right-angle drill | 0–350 and 0–1,400 RPM; capacity up to 6-1/4 inches with a hole saw or 4-5/8 inches with a self-feed bit; 13.1 lb with battery |
| Demolition and reciprocating cuts | XRJ06PT reciprocating saw | 1-1/4-inch stroke; up to 3,000 strokes per minute; up to 10 inches in wood with a 12-inch blade |
| Pruning from a pole | XAU01PTB pole saw | 10-inch bar; 8-foot listed overall length; 3,940 feet per minute chain speed |
Check the kit contents before buying
The cited model numbers ending in PT or PTB are kit listings, and the five pages list two 5.0Ah batteries and a dual-port charger. Makita also offers tool-only models with Z designations, so don’t assume a bare tool includes batteries or a charger. Confirm the contents on the exact SKU’s current listing before purchase; the kit contents described here apply to the cited US product pages.
Quick Recap
Best Value
- 1/2" Driver-Drill with 2-speeds (0-600 and 0-1,900 RPM) delivers up to 480 in. Lbs. Of Max Torque
- 1/2" Driver-Drill features a compact design at only 7-1/4" long and weighs only 3.3 lbs. With battery for reduced operator fatigue
- Impact Driver with variable speed (0-2,900 RPM and 0-3,500 IPM) delivers up to 1,460 in. Lbs. Of Max Torque
- Impact Driver features a compact design at only 5-3/8" long and weighs only 2.8 lbs. With battery for reduced operator fatigue
- Ergonomically designed handles with rubberized soft grips provide increased comfort
Rank #4
- Variable speed control dial (6,000-20,000 OPM) enables user to match the speed to the application
- 3.2° oscillation angle engineered for faster, more aggressive cutting and sanding
- Large on/off slide switch with lock-on button for operator convenience
- Includes adapters to fit most competitive accessories
- Small diameter barrel grip (only 2-3/8") for easy handling. Compatible with Makita 18V Lithium-Ion batteries with a Star symbol (battery sold separately)
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
