The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →iTechGuides is reader-supported. When you buy through links on our site, we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases. Learn more
Vite+ has three different hook systems that are easy to confuse: Vite Task can run preX and postX package scripts around a task, Git can dispatch repository hooks through a generated Vite+ dispatcher, and package installation can invoke vp config from prepare or postinstall. They run at different times and are controlled by different settings.
The practical sequence is: vp run X may run preX, then X, then postX; installation may run vp config; and a commit can travel through the dispatcher to .vite-hooks/pre-commit and then vp staged.
The three Vite+ hook mechanisms
“Vite+ hooks” is not one hook with several names. It describes separate automation layers in the Vite+ toolchain, which combines Vite, Vitest, Oxlint, Oxfmt, Rolldown, tsdown and Vite Task. The documented hooks are software lifecycle and Git automation mechanisms; they do not depend on a physical product.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
| Mechanism | Trigger | When it runs | Where its policy is defined | Main control |
|---|---|---|---|---|
preX/postX |
vp run X |
preX before X; postX after X |
Package scripts plus the workspace-root Vite Task configuration | run.enablePrePostScripts |
| Git-hook dispatcher | Git hook events, such as a commit | Git invokes the generated dispatcher, which forwards to project-owned hook scripts | Generated dispatcher plus files under .vite-hooks |
vp hooks enable, disable and status; Git’s core.hooksPath |
| Install-time configuration | Package installation | prepare or postinstall invokes vp config |
The package script and Vite+ configuration | VP_GIT_HOOKS and HUSKY environment variables |
Keeping these categories separate prevents two common mistakes: treating preX and postX as Git hooks, and assuming that enabling the dispatcher decides what a commit should run. The dispatcher supplies the plumbing; a project-owned hook supplies the policy.
#1 Best Overall
- Powerful Turbo Fan:CAGIWIRU Electric Air Duster have reached speed up to 130000RPM,Can efficient remove dust and debris.With LED light and Three Adjustable Speed to meet with different cleaning tasks.
- With Attached USB C Fasting Charging cable.Charing 3 hours,Enjoy up to 240 minutes of use on the lowest setting, For third speed can use for 25mins.with four charging options to meet with your needs.
- Wide Application: attached 5 different nozzles,making it suitable for a variety of scenes, such as car,pet, pc, keyboards, and other electronic devices. It also serves for office and home clean duster.
- Handy Design & Portable:Cordless air duster electric nozzle is Light weight and small size, design and comfortable to hold and space saving, convenient to carry around. You can put it in your room or inside the car without taking up space.
- Economical &Reusable: Built durable materials with a long-lasting battery,our CAGIWIRU air duster it's a sustainable alternative to disposable air cans.
How preX and postX run around a task
The execution order
Vite Task’s run.enablePrePostScripts option is enabled by default. When it is enabled and the corresponding package scripts exist, running script X causes this sequence:
- Run
preX. - Run
X. - Run
postX.
For example, a package that defines prebuild, build and postbuild will get the pre-step before the build and the post-step afterward when you invoke vp run build. The names are tied to the target script: pretest surrounds test, while prelint surrounds lint.
These are package-script lifecycle hooks managed by Vite Task. They are not triggered by a Git commit, and they do not require Git to be configured.
Free tools Windows power users keep installed
One-click scans. No signup required.
Where to configure the behavior
Set the option in the workspace root’s vite.config.ts:
run.enablePrePostScripts: trueThe setting belongs at the workspace root. Putting it in an individual package configuration is an error, so a monorepo should not attempt to opt in or out separately from each package. The default value is true; you only need to add it when documenting the choice explicitly or changing it.
Rank #2
- Screen Cleaner is Your Screen’s New Bestfriend! - EVEO is proud to present a screen cleaner that’s perfectly suited for your TV. Meet your new screen cleaner, computer screen cleaner, laptop cleaner, iPad cleaner, Macbook,tv cleaner or any other electronic device. Our screen cleaner spray and wipe along with the included plush microfiber cloth, easily removes dust, fingerprints & other smudges on the screen’s surface. Clean effectively for a streak-free screen
- Gentle on your Screens - Our screen cleaner spray and wipes is compatible to be used even for the most sensitive LCD, LED, CRT, and OLED screens in proper use. Be at ease knowing that this product is compatible with all the major brands: LG, SONY, Samsung, Sharp, iPad, iPhone, Android screens, Kindle, PC monitors - we’ve got you covered! Can be used as LCD screen cleaner, tv cleaner, smart tv screen cleaner, and more
- Premium Super Soft Plush Microfiber Cloth - Included in this efficient screen cleaning kit. This screen cleaner spray and wipe has our signature plush microfiber cloth specially designed to comply with screens and monitors and leave them streak-free. Has been shown to effectively absorbs stubborn stains, zero streaks, and no fiber shedding. Always use this together with our screen cleaner for the best results
- Easy-to-Use Screen Cleaner Kit + microfiber cleaning cloth - The EVEO Screen Cleaning Kit will easily be your new favorite tool when it comes to taking care of the things you love most, quick and easy solution for a streak-free screen. Simply screw on the sprayer gun on the screen cleaner bottle. Spray the cleaning liquid onto the microfiber cloth, then wipe the screen until desired cleanliness & shine is achieved.
- Quality Screen Care Kit Worth Purchasing - Enjoy a convenient Screen Cleaner anytime, anywhere you need it. Your satisfaction is our top priority. We stand behind the quality of our products and that’s why, you shouldn’t be worrying at all. We manufacture the Best Screen Cleaner. and can be used for laptop cleaning kit, laptop screen cleaner, tv screen cleaner for smart tv. MacBook screen cleaner, monitor cleaner or screen cleaner spray for electronic devices with microfiber cleaning cloth
Disabling automatic pre and post scripts
To stop Vite Task from automatically looking for and running preX and postX, set the root option to false:
run.enablePrePostScripts: falseThis changes the run-script lifecycle only. It does not disable Git dispatching, vp staged, or install-time calls to vp config. Those mechanisms have their own controls.
How the Git-hook dispatcher works
Generated infrastructure versus project policy
vp hooks enable installs or refreshes a generated dispatcher in the hooks directory. The default generated location is .vite-hooks/_, and Vite+ sets Git’s core.hooksPath so Git sends hook events through that dispatcher.
The dispatcher is infrastructure. It makes sure Git can reach Vite+’s hook system, but it does not define the checks your repository considers mandatory. Project-owned scripts under .vite-hooks define that policy. This distinction matters when reviewing a change: updating the generated dispatcher is not the same as changing the commands run before a commit.
Enabling or refreshing hooks
Run:
vp hooks enableUse this when setting up a repository, after removing a dispatcher, or when the generated files need to be refreshed. The command also establishes the Git hook path used by Vite+.
Rank #3
- 【Large size】：Measuring 800 x 300 mm/ 31. 5×12 inches, which is wider and taller than others. Large mouse pad can perfectly fit your keyboard and mouse of any size, and there is also ample space for peripherals such as phones, tablets, etc.
- 【LED backlight mouse pad】：Blade Hawks RGB mouse pad provides 7 static modes and 7 dynamic modes will give you the options you are looking for. Power-off memory function remembers the last lighting mode you selected. The super glow fiber Chroma will give you a colorful gaming setup that you want.
- 【Anti-slip rubber base】：Made from Natural rubber, this gaming mousepad will firmly grip your desktop, allowing you to enjoy the ultimate precision in the games you are most passionate about. It also comes with a texture that enhances this ability even further.
- 【Smooth and waterproof surface】: Micro-textured cloth surface, for extremely precise mouse control and a smooth movement. When liquid splashes on the gaming mouse pad, it forms water droplets and slides down. Will not delay your work or gameplay.
- 【Plug and play】: This mouse and keyboard pad is powered by USB, plug and play, no driver required. One button control light modes. Press one time to change the lighting mode, press twice to change the brightness, press and hold about 3 seconds turn ON/OFF.
Checking the current state
Run:
vp hooks statusThe status command reports three useful pieces of information: the saved preference, whether the dispatcher is present, and which project-owned hook scripts exist. Check all three when a commit hook appears to be missing. A preference can say hooks are enabled while a generated file is absent, or the dispatcher can exist while the project has no policy script for the event you expected.
Disabling the dispatcher
Run:
vp hooks disableDisabling tears down the generated dispatcher. If Git’s core.hooksPath currently points to the Vite+ path, the command unsets that setting. It also stores a local disabled preference. That preference is important: lifecycle scripts will not immediately reinstall the dispatcher until hooks are explicitly enabled again.
Disabling Vite+ hooks does not delete or rewrite an unrelated hook manager’s configuration. It turns off the Vite+-managed dispatcher and prevents its own lifecycle setup from bringing it back.
What happens at commit time
The commit path
A typical Vite+ commit path has four stages:
- Git receives a commit request and follows its configured
core.hooksPath. - The generated Vite+ dispatcher receives the hook event.
- The dispatcher forwards to the project-owned
.vite-hooks/pre-commitscript. - That script runs
vp staged.
The project-owned pre-commit file is therefore the commit-time entry point. The generated dispatcher only gets Git to that file.
What vp staged does
vp staged reads the staged block in the workspace’s vite.config.ts. It then applies the commands configured there to staged files. A common command is vp check --fix, which lets the configured checking and fixing workflow run on the files included in the commit.
Rank #4
- 【Softer and More Comfortable】Vaydeer wrist rest has unique diamond pattern, which is the combination of softness and aesthetics. The materials of wrist rest are improved into higher quality memory foam and covered with silky smooth lycra. The computer wrist rest makes you as comfortable and cushiony as like rest your wrists on clouds.
- 【Ergonomic Wrist Saver】The wrist rests for keyboard and mouse comes with a 17.32×3.15×0.83 inch keyboard wrist pad and a 5.94×3.15×0.83 inch mouse wrist support. Based on ergonomic design, the unique concave shape is the perfect fit for your wrist joints. The wrist rest pad fits most computer keyboards and laptops, improve hand and wrist posture, release your wrist and arm stress.
- 【Non-Slip Rubber Bottom】Featuring an anti-skid silicone base on the bottom, this wrist keyboard support stays firmly in place on your desk, preventing the padding from sliding around, ensuring stable and consistent wrist support during extended computer sessions.
- 【Better Experience & Pain Relief】Our keyboard arm rest is beneficial to alleviate the soreness caused by direct contact and friction between your arm and a hard desk surface, reducing the risk of wrist fatigue or carpal tunnel. The soft texture of memory foam can evenly distribute the pressure around your wrists and provide good support with just enough give.
- 【Helpful in Multiple Scenarios】Whether you're working, studying, writing, typing, gaming, this keyboard and mouse rest combo is an essential accessory to add comfort and support to your hands and wrists. It’s also a great gift for men, women, family, friend, coworker, gamer, teacher, etc.
Because the commands come from the staged block, changing commit policy means editing that configuration or the project-owned hook, not editing the generated dispatcher. If vp staged runs but no checks occur, inspect the staged configuration and the pre-commit script rather than reinstalling the dispatcher first.
Why vp config appears in prepare or postinstall
Install-time sequence
Projects commonly place vp config in a package’s prepare or postinstall script. During installation, the package manager invokes that lifecycle script, which invokes vp config. Vite+ can then install or refresh the Git-hook dispatcher and configure agent integration.
This is why a fresh dependency install can change the presence of generated hook files even though nobody ran vp hooks enable manually. The install script is acting as the setup entry point.
Suppressing hook setup in an environment
Set VP_GIT_HOOKS=0 in the environment where hooks must not execute. This flag also prevents lifecycle setup from reinstalling hooks in that environment. It is useful for environments where Git hooks are inappropriate, such as a controlled installation step that should not alter repository configuration.
Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchPC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Vite+ also honors HUSKY=0 for compatibility. That variable is recognized as a request to skip hook behavior when a project or its surrounding tooling uses the Husky convention. These environment controls affect hook execution and setup; they do not change the run.enablePrePostScripts option for ordinary task scripts.
Best Value
- 【No Drill Mounted】Cable management tray can be assembled in as little as 3 minutes or less-simply. Side clips easily clampe the edge of desk, pass through the holes on the sides, and secure excess cables with baskets. Desk cable management supports inward or outward installation to meet your needs in different scenarios, and provides you with great convenience when collecting and organizing wires.
- 【Rubber Pad Protects Desk】Wire organizer under desk built-in soft rubber pads on the clamp protect your desk from scratches, so you will not damage your furniture or office.
- 【Sturdy and Beautiful】Cord management under desk is made of high-quality carbon steel and holds about 15 lbs. The wire basket has 2 holes on each side of the tray to enable your cables to pass freely. Cable baskets are suitable for desk thickness use from 0.4" to 2.4".
- 【Space Saving & Keep Organized】Desk cable management tray holds all your power cords, outlet strips, USB hubs and computer transformers hidden from your feet, and the data cables will not enter the vacuum cleaner to keep your desk clean and tidy. Desk wire organizer is also suitable for use in the kitchen and outdoors.
- 【Reduce Safety Risks】Cable tray under desk keeps all plugs away from your kids, no more worry about tripping. Using 2 holes wire tray saves extra space, helps you easily cabling and wire protection. The mesh design is not easy to accumulate dust, but avoids safety accidents caused by messy wires.
Project creation and migration
Creating a project
vp create can set up hooks as part of project creation. Use --hooks to force hook setup or --no-hooks to skip it. The choice controls whether Vite+ initializes its Git-hook workflow during creation; it does not alter package-script pre and post behavior.
Migrating an existing repository
vp migrate can also set up hooks, with the same --hooks and --no-hooks controls. Migration is deliberately conservative when it finds an existing Husky, lefthook, simple-git-hooks or yorkie setup. It preserves that configuration and warns instead of silently converting ownership to Vite+.
If the repository owner wants the Vite+ workflow, manual conversion is required. Review the existing manager’s scripts, move the intended policy into the Vite+ project-owned hook and staged configuration, then enable the Vite+ dispatcher. Do not assume that a successful migration command has converted the old manager.
Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Clear out junk files and repair common Windows errors3Fix the driver behind crashes, sound loss and screen glitchesHow to choose the right control
- Extra commands appear around
vp run X: inspectrun.enablePrePostScriptsin the workspace-rootvite.config.ts. Set it tofalseif automaticpreX/postXexecution is unwanted. - Commits are not reaching the repository checks: run
vp hooks status, confirm the dispatcher and.vite-hooks/pre-commitare present, then inspect thestagedconfiguration used byvp staged. - Installing packages recreates hooks: look for
vp configinprepareorpostinstall. UseVP_GIT_HOOKS=0for an environment where lifecycle setup must not reinstall them. - You want hooks off locally: run
vp hooks disable. It removes the Vite+ dispatcher, unsets Vite+’s hook path when applicable and records the disabled preference. - An older hook manager is still present: migration preserves it. Decide which system should own the policy and perform a manual conversion if moving to Vite+.
A complete lifecycle example
Consider a workspace with package scripts named precheck, check and postcheck, a project-owned .vite-hooks/pre-commit that invokes vp staged, and a package prepare script that invokes vp config.
- Running
vp run checkexecutesprecheck, thencheck, thenpostcheckwhile pre/post automation remains enabled at the workspace root. - Installing dependencies invokes
prepare, which runsvp configand can install or refresh the dispatcher. - Committing sends Git through
core.hooksPathto the dispatcher, then to.vite-hooks/pre-commit, which invokesvp staged. vp stagedreads the configuredstagedblock and applies its commands, such asvp check --fix, to staged files.
Turning off one stage does not automatically turn off the others: setting run.enablePrePostScripts to false leaves Git hooks intact, while vp hooks disable leaves ordinary vp run behavior unchanged.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
